fall@ektools.kodak.com (Jeffrey E. Fall) (05/20/91)
CoCo3 Parts for Sale! CoCo 3 Parts for Sale! Coco 3 Parts for Sale!
As many of you have seen, I have been trying to sell two complete
systems. Having no such luck, I am now going to offer subsystems.
I don't want to break apart the subsystems (yet) so, please only
offer toward a subsystem as stated. I have too many computers and
not enough time or space which is why this is happening:
DISK Subsystems for CoCo3:
Subsystem a: A standard issue grey floppy. This is the dual sided
double density model, 40 trak dd. The case has it's own power supply
and the drive is half height. I will also throw in the original
Radio Shack Drive which is full height - probably 30 trak.
Subsystem a includes:
Disk case with builtin power supply
1/2 height 40trak dd floppy drive
Original 30 trak full height floppy.
Price: $40.00 plus shipping.
Subsystem b: A hard drive Kit. A standard issue Burke and Burke
adapter card and instruction book and disks with short test cables to
the disk drive from the Western DIgital WXdtGEN XT style harddisk controller card.
You must supply power supply for the disk drive and case. The
disk drive is a Micropolis 1325D which is 71mb unformatted.
I will also supply a boot disk which will boot the hard drive
system from a 40trak dd floppy.
The Micropolis Hard-disk is ready
to go with OS-9 software and loads of utilities.
Subsystem b includes:
Miicropolis 71mb 1325 disk drive
Western Digital Hard Drive COntroller card, Xt style.
Very Short Cables from the WXdtGEN to the 1325 Hard disk.
Burke and Burke hard disk card, case and disk and documentation.
A boot disk for Slot #2 of the Multi Pak Adapter (MPI) toaster.
Loads of OS9 software on the Harddisk.
Price: $275.00 plus shipping plus C.O.D.
Subsystem c: A hard drive Kit. A standard issue Disto Super Controller
II card with an additional 4 in one card. This little fellow can
talk SCSI with a SCSI hard disk, talk RS232 to a terminal, talk to
a floppy drive, (takes the place of the 502 floppy) and it has a
clock in it, (battery backed up). I will also include an
Adaptec 4000a SCSI <---> MFM card. Here is the flowchart:
COCO3<-->disto SCII--S-C-S-I-->Adaptec 4000A<--M-F-M-->1325D Hard drive
I forgot to mention the harddrive - a Micropolis 1325d complete,
formatted and ready to use.
Subsystem c includes:
Micropolis 71mb 1325d disk drive
Disto SCII & 4in1 card
Adaptec 4000A SCSI <---> MFM card
Cables (all cables needed) 1 SCSI & 2 MFM
power pak for the Disto SCII
TTY cable for the Disto.
Disks and documentation for the disto
Price: $350.00
********* CC3 Stuff ********************************
Items A: Multipak adapter. The classic Multipak Adapter with 4 slots
for plugging stuff in. Typically the floppy 502 controller and
Burke and Burke hard drive adapter cards go into this as can a
serial card to talk to a modem or terminal.
Item A is tested and is upgraded to COCO3 operation standards.
Price: $75.00 firm.
Item B: Multipak adapter. As above - untested. No Flames permitted
you buy this (Item B) as is!!!
Price: $50.00 firm.
Item C: Disto Serial card. This Gem plugs into the Multipak and
will talk RS232 to a terminal or Modem. This card comes with the
one wire fix - a wire from the box to the CC3 to fix some kind
of interrput hack. Works fine.
Price: $40.00 firm
Item D: Radio Shack Standard issue floppy drive case with two 40trak
Double sided floppies mounted on side. Box is one unit of height,
ie: full height. Drives are half height and look great one on
top of the other in the box. The drives match - black fronts and
the box is snow white. This unit is very clean and looks/runs new.
Price: $125.00
Item E: Radio Shack FD-502 Controller card. This is used to
interface the floppies (above) to either the Multipak or to the
CC3 itself (without the Multipak).
Price $40.00
Item F: A standard Issue Radio Shack CM-8 monitor. This thing has
never ben moved anywhere and has less than 200 hours on it.
I will ship in the original box with original packing material
and manual. $135.00 plus shipping, (about $10.00 I bet).
Items G: Two Radio Shack CC3 Computers. $60.00 a piece.
work great, no problem, look very nice - not moved or
been spilled on. Not modified or hacked in any way.
CC3 computers: $60.00 for each, you pay shipping.
Items H: Two 512K memory upgrade Kits: classic boards and chips.
$60.00 per kit. Work fine. These are currently in the above
CC3 computers. Will remove. Or, will sell each computer for
$120.00 with 512K upgrade.
----------------------------------------------------------------
SOftware:
Studioworks:
Cable, disks and documentation: $25.00
OS9/CC3 C compiler with disks/doc. $50.00
Dynacalc with docs and disk $20.00
Thanks for talking the time to read this long list. Please, no
substitutions at this time. If you are interested, please cut out
the part of the message or item you are interested in, comment and
mail it back to me at:
fall@ektools.kodak.com or fall.ektools.kodakr.kodak.com
* or *
leave me a message at: 716-781-6587 or talk live between 8-4 M-F.
Note: This distribution is only intended for the 48 States. I don't
want to deal with international currency or shipping issues.
Note: The original Subsystem B has been sold. The one offered
above was (is) from stuff uncovered in the basement this weekend.
To save you costs and me time, a Money Order sent for any of the above
subsystems would speed up shipping considerably.
Cheers,
Jeff Fall