tyvng%wateng%waterloo.csnet@CSNET-RELAY.ARPA (12/06/85)
From: Vincent Ng <tyvng%wateng%waterloo.csnet@CSNET-RELAY.ARPA> I have just been able to access a Tek4125. However, we don't have any software/driver to use it. Does anyone know where I can find the driver for it ? Thanks, Vincent Ng
alanj@orca.TEK.ARPA (12/13/85)
From: tektronix!orca.TEK!alanj@ucbvax.berkeley.edu ========================================================================= To the moderator: Could you forward this message on to the original poster of the 4125 driver query? Please do not post this to the net. ========================================================================= Re: Anybody have a driver for the Tek4125? I'm not certain what you mean by `driver'. The 4125 has a standard RS-232 serial interface, it should connect as any other terminal. Do you need a TERMCAP? There also exists some optional DMA interfaces that have limited application. They are available for DEC VAX 11/7x0 (Option 3A) or uVAX (Option 3Q), and Tektronix 6000 Series (Option 3C) computers. Drivers for the DMA interfaces are available for Ultrix and VMS. (The VAX side of the DMA interfaces use DR11 or DRV11 parallel interfaces). The 4125 is supported by a number of standard graphics libraries. Alan Jeddeloh Graphics Workstation Division Tektronix, Inc. tektronix!orca!alanj (503) 685-3106
abh6509@ritcv.ARPA (12/18/85)
From: ucdavis!lll-crg!seismo!rochester!ritcv!abh6509@ucbvax.berkeley.edu (D) If you do find a source for a driver, please let me know. I am working on a 4115B and a driver to interface with VMS or 4.2 would be very nice. Andrew Hudson