benson@alcatraz.ksr.com (Benson Margulies) (05/31/87)
With help from a cast of three or four, I got CAP4/KIP working to the point where my Kinetics talks to the admin daemon, look works, and nothing else does. Heres my atalkatab 1.1 H 192.9.200.200 KSR #ksr ethernet 2.1 KC 192.9.200.200 KSR #ksr appletalk net I192.9.200.0 L0 #ipbroad ipname L0 L0 #ildebug ipfile L0 L0 L0 L0 S0 S0 #ipother unused unused LX0 S0 S10 #flags ipstatic ipdynamic S2.1 S1.1 "AT" #atneta atnete zonea Here's the atalk.local for a typical node, ip address 192.9.200.17 # mynet mynode myzone 1.1 17 AT # bridgenet bridgenode bridgeIP 1.1 200 192.9.200.200 Note the use of the same net number for both MYNET and BRIDGENET I picked this up from one of the people who has the stuff working. This appears to be counter to the installation instructions, but nothing works AT ALL if I actually list 2.1 in the atalk.local as the bridge node. Also, KTALK/prompt claims that the node number of the kinetics is 220, but here I have to call it 200. Any help appreciated ... Benson I. Margulies Kendall Square Research Corp. harvard!ksr!benson All comments the responsibility ksr!benson@harvard.harvard.edu of the author, if anyone.