joachim@iravcl.ira.uka.de (02/04/88)
In article <606@cernvax.UUCP> jmg@cernvax.UUCP (jmg) writes: >In reality, I would like to create ensembles of physical AppleTalk >segments. My first thought was that this would be by setting the same >AppleTalk network number in different FastPath units, so as to have the >logical zone span different physical AppleTalks. However, according to the >Kinetics guide this would screw up arp routing, since this network >number is the pseudo-subnet part of the ip address. As far as I know you may NEVER assign identical net numbers, but you may assign identical net names if the subnets are adjacent. I'd like to know which version of the combined gateway and which versions of Telnet - if any - you are using. Joachim Lindenberg, University of Karlsruhe Federal Republic of Germany - West Germany.