allen@gitpyr.UUCP (P. Allen Jensen) (02/20/86)
We are about to try to connect : 1 Vax 11/780 - VMS 2 uVax II - VMS 1 Apollo DN660 (SYS V or Berk. 4.2 or DOMAIN/AEGIS) 1 Sun-3/160 - UNIX 2 Masscomp 5500 - UNIX This is going to be done using ethernet. I have a couple of questions: 1. Is there a VMS product for running TCP/IP ? 2. Can all of these systems be used with a DELNI ? (A DELNI is an "Ethernet-in-a-box", eg no cable or transceiver) 3. Should we even bother to try to get the VAX systems to talk to the other systems with TCP/IP ? 4. Is there a better solution than TCP/IP for about the same cost ? Thanks in advance for any help on this. -- "It's quite easy, if you don't know how. That's the important bit. Be not at all sure how you're doing it." -Arthur Dent P. Allen Jensen Manager, Systems Division GTICES Systems Laboratory Department of Civil Engineering Georgia Insitute of Technology Atlanta Georgia, 30332-0355 ...!{akgua,allegra,amd,hplabs,ihnp4,masscomp,ut-ngp}!gatech!gitpyr!allen