me@scubed.UUCP (Mark Erikson) (05/22/89)
I am attempting to place two fastpaths onto one backbone and have
seperate zone names. I can get the two fastpaths to work but they cannot
see each others zones.
Below is the atalkatab file I boot the two fastpaths from. The serving
machine is a sun3 running kip 0188 and os3.4. Fastpath1 is a fastpath4 and
Torry is a fastpath2. The fastpath4 was running K-star but it kept
crashing. It is now running kip and seems to be acting fine.
I have successfully added other zones (for the heck of it) on other
networks but I can't seem to get the hang of adding the second fastpath to
the same logical network as fastpath1 (KFP-4). I have used the same zone
name too without any luck. I'm just not sure what I'm missing.
Thanks,
Mark Erikson
me@scubed.com
ucsd!scubed!me
(619) 453-0060
192.16.16.100 fastpath1
192.16.16.132 fastpath2
55.1 H fastpath1 fastpath1 #S3 main ethernet
58.1 E fastpath1 fastpath1
56.1 KC fastpath1 fastpath1 #ACS Kinetics
I192.16.16.0 L0 #ipbroad ipname
I192.16.16.85 L0 #ipdebug ipfile
L0 L0 L0 L0 S0 S0 #ipother atnetet unused
LX0 S5 S26 #flags ipstatic ipdynamic
S56.1 S55.1
#55.4 H fastpath2 Torry #Tried with and without
#58.2 E fastpath2 Torry #Tried with and without
#56.2 KC fastpath2 Torry #Tried this one also
56.2 K fastpath2 Torry #S3 main ethernet Torry Pines
I192.16.16.0 L0 #ipbroad ipname
I192.16.16.85 L0 #ipdebug ipfile
L0 L0 L0 L0 S0 S0 #ipother atnetet unused
LX0 S5 S26 #flags ipstatic ipdynamic
# S56.2 S55.4
S56.2 S55.1 #I have tried both 55.4 and 55.1
#These work just fine
55.2 H 192.31.68.63 thinnet #thinnet cap servers
55.3 H 192.31.70.20 sun4net #thinnet cap servers