gp@lll-lcc.UUCP (George Pavel) (12/07/89)
Kinetics, in their KSTAR software for the FastPath, lets you set up a FastPath to use IPTalk without requiring an atalkad administrative host. This is done with their FastPath Manager application. I would like to have two FastPaths talk to each other using IPTalk only, no Ethertalk, but so far have not been able to do so. I made sure that each unit had the same first three bytes in the IP address, and they have the same Appletalk zone name and network number in the "IPtalk Interface" section. When I turn on option 5 which says use IPTalk only, a Mac on a Localtalk can see its own zone and the IPTalk zone but not the zone that is on the other Localtalk. If I give the same zone name to the two Localtalks, a Mac can only see the resources on its own network, not on the other one. Should I be able to do this without a UNIX administrative host? (The manual implies this.) If so, how do I get it to work? George Pavel Lawrence Livermore National Laboratory P.O. Box 808 L-68 Livermore, CA 94550 Internet: gp@llnl.gov (415)422-4262 UUCP: ...!lll-lcc!gp