mark@maui.qualcomm.com (Mark Erikson) (03/27/91)
I have installed cap6.0 with the three patches and I am using the ethertalk interface. I have been able to get papif to work well but I am having problems registering aufs. We have a network divided by Cisco's which bridge appletalk/ethertalk and route IP. We have an Appleshare server on each side which appear on the same zone. When I run aufs it registers with atis but I can't find it on any of our three zones here using atlook. When I login to a mac and select appleshare I find the new aufs server but it doesn't appear on the other side of the Cisco. I have two machines running the cap on the same side of the cisco with the atalk.local file below. One is handling print queues to laserwriters and the other is my test workstation I am using to bring up aufs. The print server is running SunOS4.1.1 and my workstation is running SunOS4.0.3. I have compiled a standalone copy on both machines. I had the same problem with cap5.0 but I hopped that 6.0 would fix my problem. What am I missing? atalk.local ----------- # Native EtherTalk using experimental CAP enet0 Twilight-C