barnett@grymoire.crd.ge.com (Bruce Barnett) (04/24/91)
We have been a happy user of CAP 5.0 for a while, but a couple of days ago we noticed the Unix printers were not longer visible to the Macintoshes. We run lwsrv on several machines, but when we restart them, we get a SLIinit error. We have replaced the Kinetics box with a different one - just in case it was bad. Still doesn't work. I have CAP6.0 patch 5 now, and am trying to figure out what is broken. I run atis, followed by atistest. atistest doesn't find anything. (nbp register error because: couldn't register name - is atis running?) atislook doesn't find anything either. Any suggestions on how to debug this? We have a large network (1000 nodes on ethernet, 700 Macs on ~30 Appletalk zones.) Thanks for any advice. -- Bruce G. Barnett barnett@crdgw1.ge.com uunet!crdgw1!barnett
resnick@cogsci.uiuc.edu (Pete Resnick) (04/25/91)
barnett@grymoire.crd.ge.com (Bruce Barnett) writes: >We have been a happy user of CAP 5.0 for a while, but a couple of days >ago we noticed the Unix printers were not longer visible to the >Macintoshes. We run lwsrv on several machines, but when we restart >them, we get a SLIinit error. The thing that has bitten me here is that the /etc/services file was replaced, leaving out the AppleTalk UDP ports. Check to make sure that is all set up right. Also, check the atis log to see if it is starting up properly. pr -- Pete Resnick (...so what is a mojo, and why would one be rising?) Graduate assistant - Philosophy Department, Gregory Hall, UIUC System manager - Cognitive Science Group, Beckman Institute, UIUC Internet/ARPAnet/EDUnet : resnick@cogsci.uiuc.edu BITNET (if no other way) : FREE0285@UIUCVMD