nethery.parc@XEROX.COM (05/02/91)
Date 5/1/91 Subject RE>Cheap Appletalk Routing? From Kee Nethery To info-appletalk Reply to: RE>Cheap Appletalk Routing? I wrote an article a while back in Dave Kosiur's connections magazine discussing how to exceed the 254 node limit on Phase One EtherTalk. The jist of the article is; configure one of your ethernet brouters to filter all AppleTalk Phase One Packets and Phase One AARPs. Then, configure one side of the brouter to be EtherTalk Network #a and the other side to be EtherTalk Network #b. In my example, I connected the two nets together with back to back FastPaths. No days I would recommend that you use AIR (Apple Internet Router) and two NuBus Ethernet cards in a Mac2. Connect on ethernet to net#a and the other to net#b. This will get you past the 254 node limit and all you'll need to do is dedicate a Mac2 to the routing. Once you completely convert to Phase 2 you can put the Mac2 on someone's desk. Kee Nethery Institute for Research on Learning nethery.pac@xerox.com