rocky@prism.poly.edu (Rocky Shiotsuki) (06/19/91)
I modified CAP 6.0 and UAB to run different host/node, it seems to me
working OK. Then I found out that I can't add many CAP server, but
if I remove one from list then new one show up on the list, looks like
it was waiting empty slot. I think this number of entry controlled by
MAXOPENPORT = 10 in port_intf.h file. I started second UAB on another
SUN workstation then everything show up by atlook.
Is there any reson to seted MAXOPENPORT = 10 ?
Does UAB support PHASE 2 protocol?
(I see phase 2 code in UAB, but when I choose UAB, Configure does
not ask phase 2 option.)
When I tested my modification of CAP and UAB, I will post this
news group.
Right now, our site, Polytechnic University, using CAP 6.0 as followed:
----------------- Local Talk
| MAC IIsi | --------- MAC ---- MAC --- LaserWriter ...
| (Liaison router)|
-----------------
+
+ Ether-Net (EtherTalk)
+
++++++ MAC
+
++++++ Sun 3 host with QMS PS-810 PostScript printer
+
++++++ Sun 3 'pucatt' (CAP 6.0, UAB/ node 24)
+
++++++ Sun 3 'puscs' (UAB only/ node 205)
+
++++++ IBM RS-6000 'thumper' (CAP 6.0/ use UAB node 205 as gateway)
+
This is output from atlook:
pucatt% atlook
abInit: [ddp: 1.00, 24] starting
Looking for =:=@* ...
1 - pucatt Aufs:AFPServer@* [Net: 1.0 Node: 24 Skt:131]
2 - thumper Aufs:AFPServer@* [Net: 1.0 Node:205 Skt:132]
3 - CAP LWD v7 QMS PS-810:LaserWriter@* [Net: 1.0 Node: 24 Skt:134]
4 - Hockney CAP LWD v7:LaserWriter@* [Net: 1.0 Node:205 Skt:129]
5 - 4071161:Liaison\252@* [Net: 1.0 Node: 43 Skt: 76]
6 - <Unnamed>:Macintosh IIci@* [Net: 1.0 Node: 28 Skt:253]
7 - Stack Machine:Public Folder\240@* [Net: 1.0 Node: 43 Skt:253]
8 - 577-990-4139:Retro A/C@* [Net: 1.0 Node: 43 Skt:251]
9 - stack machine:Retrospect Remote@* [Net: 1.0 Node: 43 Skt:251]
pucatt% id
-----------------------------------------------------------------------
Rocky Shiotsuki Internet: rocky@puscs.poly.edu
Systems Programmer 128.238.5.8
Polytechnic University
333 Jay Street, Brooklyn, New York 11201