hansen%brand.usc.edu@oberon.usc.edu (Richard Hansen) (03/12/88)
I need some help printing TeXtures output on an Imagewriter. I seem to get dimensions about 10 percent smaller than specified in my TeX or LaTeX code whenever I have the Imagewriter chosen. The smaller distances showup both on the screen and on the printed page--seemingly only in the horizontal. The verticle dimensions seem to be pretty close to correct. If I have the Laserwriter printer selected (although I don't have one connected) the dimensions on the Mac+ screen (when shown at "actual size") appear to be correct in both the horizontal and verticle. For example, if I have the following simple TeX code: \vrule height1.0in width4.0in \end and typeset it using "plain" format, I get a solid black box on the screen and on the Imagewriter printout of 1 inch by 3.6 inches, instead of 1.0 inch by 4.0 inches. Does anybody know what the problem is? Am I doing something wrong or is it a fault or limitation of TeXtures or the Imagewriter? The configuration I have is TeXtures 1.01 and LaTeX 1.0 running on a Mac+ with the latest system (multifinder or finder makes no difference) and the latest Imagewriter and Laserwriter drivers. Any help would be appreciated. reply to: Richard Hansen, University of Southern California ARPA: hansen%brand.usc.edu@oberon.usc.edu UUCP: ...SDCRDCF!usc-oberon!brand!hansen ---------------------------------------- Submissions to: desktop@plaid.sun.com Administrivia to: desktop-request@plaid.sun.com UUCP: {amdahl,decwrl,hplabs,ihnp4}!sun!plaid!desktop{-request}