keith@g4lzv.co.uk (Keith Brazington) (04/27/89)
I had the same problems as everyone else is reporting on Microports *nix under SCO XENIX 2.2.1. The solution is simple, up the stack size for /bin/sh. I used # mv /bin/sh /bin/sh.old # cp /bin/sh.old /bin/sh # fixhdr -F 8000 /bin/sh This may seem a bit over the top, but I put it back after! # mv /bin/sh /bin/sh.rm # mv /bin/sh.old /bin/sh Then wait till nobody is using /bin/sh.rm then # rm /bin/sh.rm That way you preserve your old shell, ( ie you don't break it ), but you get to use Configure without bus errors etc. I hope that of use Keith -- UUCP ..!uunet!mcvax!ukc!slxsys!g4lzv!keith | Keith Brazington Smart mail keith@g4lzv.co.uk | 5b Northgate Rochester Kent UK Ampanet [44.131.8.1] and [44.131.8.3] | +44 634 811594 Voice Packet G4LZV @ GB7UWS -- G4LZV USENET BB --| +44 634 401210 Data v22,v22bis