BLARSON@ECLA.USC.EDU (Bob Larson) (05/26/88)
comp.sources.misc: Volume 3, Issue 31
Submitted-By: "Bob Larson" <BLARSON@ECLA.USC.EDU>
Archive-Name: mg2a/Part07
# This is a shell archive.
# Remove everything above and including the cut line.
# Then run the rest of the file through sh.
#----cut here-----cut here-----cut here-----cut here----#
#!/bin/sh
# shar: Shell Archiver
# Run the following text with /bin/sh to create:
# regex.c
# macro.c
# sys/bsd/fileio.c
# This archive created: Sun May 22 02:23:50 1988
# By: blarson
if test -d sys
then true
else mkdir sys
fi
if test -d sys/bsd
then true
else mkdir sys/bsd
fi
cat << \SHAR_EOF > regex.c
/* Imagine Generic gnuemacs copyright notice here */
/* modified by Robert Larson to make fewer assumptions about the compiler */
/* (Making it useful to mg) (#if not supported by osk, enum not supported by many) */
/* To test, compile with -Dtest.
This Dtestable feature turns this into a self-contained program
which reads a pattern, describes how it compiles,
then reads a string and searches for it. */
#ifdef REGEX
#include "def.h" /* defines VOID etc. for mg */
#ifdef emacs
/* The `emacs' switch turns on certain special matching commands
that make sense only in emacs. */
#include "config.h"
#include "lisp.h"
#include "buffer.h"
#include "syntax.h"
#else /* not emacs */
/*
* Define the syntax stuff, so we can do the \<...\> things.
*/
#ifndef Sword /* must be non-zero in some of the tests below... */
#define Sword 1
#endif
#define SYNTAX(c) re_syntax_table[c]
#ifdef SYNTAX_TABLE
char *re_syntax_table;
#else
static char re_syntax_table[256];
static VOID
init_syntax_once ()
{
register int c;
static int done = 0;
if (done)
return;
bzero (re_syntax_table, sizeof re_syntax_table);
for (c = 'a'; c <= 'z'; c++)
re_syntax_table[c] = Sword;
for (c = 'A'; c <= 'Z'; c++)
re_syntax_table[c] = Sword;
for (c = '0'; c <= '9'; c++)
re_syntax_table[c] = Sword;
done = 1;
}
#endif /* SYNTAX_TABLE */
#endif /* not emacs */
#include "regex.h"
/* Number of failure points to allocate space for initially,
when matching. If this number is exceeded, more space is allocated,
so it is not a hard limit. */
#ifndef NFAILURES
#define NFAILURES 80
#endif NFAILURES
/* width of a byte in bits */
#define BYTEWIDTH 8
/* These are the command codes that appear in compiled regular expressions, one per byte.
Some command codes are followed by argument bytes.
A command code can specify any interpretation whatever for its arguments.
Zero-bytes may appear in the compiled regular expression. */
typedef char regexpcode;
#define unused 0
#define exactn 1 /* followed by one byte giving n, and then by n literal bytes */
#define begline 2 /* fails unless at beginning of line */
#define endline 3 /* fails unless at end of line */
#define jump 4 /* followed by two bytes giving relative address to jump to */
#define on_failure_jump 5 /* followed by two bytes giving relative address of place */
/* to resume at in case of failure. */
#define finalize_jump 6 /* Throw away latest failure point and then jump to address. */
#define maybe_finalize_jump 7 /* Like jump but finalize if safe to do so. */
/* This is used to jump back to the beginning
of a repeat. If the command that follows
this jump is clearly incompatible with the
one at the beginning of the repeat, such that
we can be sure that there is no use backtracking
out of repetitions already completed,
then we finalize. */
#define dummy_failure_jump 8 /* jump, and push a dummy failure point. */
/* This failure point will be thrown away
if an attempt is made to use it for a failure.
A + construct makes this before the first repeat. */
#define anychar 9 /* matches any one character */
#define charset 10 /* matches any one char belonging to specified set. */
/* First following byte is # bitmap bytes.
Then come bytes for a bit-map saying which chars are in.
Bits in each byte are ordered low-bit-first.
A character is in the set if its bit is 1.
A character too large to have a bit in the map
is automatically not in the set */
#define charset_not 11 /* similar but match any character that is NOT one of those specified */
#define start_memory 12 /* starts remembering the text that is matched */
/* and stores it in a memory register.
followed by one byte containing the register number.
Register numbers must be in the range 0 through NREGS. */
#define stop_memory 13 /* stops remembering the text that is matched */
/* and stores it in a memory register.
followed by one byte containing the register number.
Register numbers must be in the range 0 through NREGS. */
#define duplicate 14 /* match a duplicate of something remembered. */
/* Followed by one byte containing the index of the memory register. */
#define before_dot 15 /* Succeeds if before dot */
#define at_dot 16 /* Succeeds if at dot */
#define after_dot 17 /* Succeeds if after dot */
#define begbuf 18 /* Succeeds if at beginning of buffer */
#define endbuf 19 /* Succeeds if at end of buffer */
#define wordchar 20 /* Matches any word-constituent character */
#define notwordchar 21 /* Matches any char that is not a word-constituent */
#define wordbeg 22 /* Succeeds if at word beginning */
#define wordend 23 /* Succeeds if at word end */
#define wordbound 24 /* Succeeds if at a word boundary */
#define notwordbound 25 /* Succeeds if not at a word boundary */
#define syntaxspec 26 /* Matches any character whose syntax is specified. */
/* followed by a byte which contains a syntax code, Sword or such like */
#define notsyntaxspec 27 /* Matches any character whose syntax differs from the specified. */
#ifndef SIGN_EXTEND_CHAR
#define SIGN_EXTEND_CHAR(x) (x)
#endif
/* compile_pattern takes a regular-expression descriptor string in the user's format
and converts it into a buffer full of byte commands for matching.
pattern is the address of the pattern string
size is the length of it.
bufp is a struct re_pattern_buffer * which points to the info
on where to store the byte commands.
This structure contains a char * which points to the
actual space, which should have been obtained with malloc.
compile_pattern may use realloc to grow the buffer space.
The number of bytes of commands can be found out by looking in
the struct re_pattern_buffer that bufp pointed to,
after compile_pattern returns.
*/
#define PATPUSH(ch) (*b++ = (char) (ch))
#define PATFETCH(c) \
{if (p == pend) goto end_of_pattern; \
c = * (unsigned char *) p++; \
if (translate) c = translate[c]; }
#define PATFETCH_RAW(c) \
{if (p == pend) goto end_of_pattern; \
c = * (unsigned char *) p++; }
#define PATUNFETCH p--
#define EXTEND_BUFFER \
{ char *old_buffer = bufp->buffer; \
if (bufp->allocated == (1<<16)) goto too_big; \
bufp->allocated *= 2; \
if (bufp->allocated > (1<<16)) bufp->allocated = (1<<16); \
if (!(bufp->buffer = (char *) realloc (bufp->buffer, bufp->allocated))) \
goto memory_exhausted; \
c = bufp->buffer - old_buffer; \
b += c; \
if (fixup_jump) \
fixup_jump += c; \
if (laststart) \
laststart += c; \
begalt += c; \
if (pending_exact) \
pending_exact += c; \
}
static int store_jump (), insert_jump ();
char *
re_compile_pattern (pattern, size, bufp)
char *pattern;
int size;
struct re_pattern_buffer *bufp;
{
register char *b = bufp->buffer;
register char *p = pattern;
char *pend = pattern + size;
register unsigned c, c1;
char *p1;
unsigned char *translate = (unsigned char *) bufp->translate;
/* address of the count-byte of the most recently inserted "exactn" command.
This makes it possible to tell whether a new exact-match character
can be added to that command or requires a new "exactn" command. */
char *pending_exact = 0;
/* address of the place where a forward-jump should go
to the end of the containing expression.
Each alternative of an "or", except the last, ends with a forward-jump
of this sort. */
char *fixup_jump = 0;
/* address of start of the most recently finished expression.
This tells postfix * where to find the start of its operand. */
char *laststart = 0;
/* In processing a repeat, 1 means zero matches is allowed */
char zero_times_ok;
/* In processing a repeat, 1 means many matches is allowed */
char many_times_ok;
/* address of beginning of regexp, or inside of last \( */
char *begalt = b;
/* Stack of information saved by \( and restored by \).
Four stack elements are pushed by each \(:
First, the value of b.
Second, the value of fixup_jump.
Third, the value of regnum.
Fourth, the value of begalt. */
int stackb[40];
int *stackp = stackb;
int *stacke = stackb + 40;
int *stackt;
/* Counts \('s as they are encountered. Remembered for the matching \),
where it becomes the "register number" to put in the stop_memory command */
int regnum = 1;
bufp->fastmap_accurate = 0;
#ifndef SYNTAX_TABLE
#ifndef emacs
/*
* Initialize the syntax table.
*/
init_syntax_once();
#endif
#endif
if (bufp->allocated == 0)
{
bufp->allocated = 28;
if (bufp->buffer)
/* EXTEND_BUFFER loses when bufp->allocated is 0 */
bufp->buffer = (char *) realloc (bufp->buffer, 28);
else
/* Caller did not allocate a buffer. Do it for him */
bufp->buffer = (char *) malloc (28);
if (!bufp->buffer) goto memory_exhausted;
begalt = b = bufp->buffer;
}
while (p != pend)
{
if (b - bufp->buffer > bufp->allocated - 10)
/* Note that EXTEND_BUFFER clobbers c */
EXTEND_BUFFER;
PATFETCH (c);
switch (c)
{
case '$':
/* $ means succeed if at end of line, but only in special contexts.
If randonly in the middle of a pattern, it is a normal character. */
if (p == pend || (*p == '\\' && (p[1] == ')' || p[1] == '|')))
{
PATPUSH (endline);
break;
}
goto normal_char;
case '^':
/* ^ means succeed if at beg of line, but only if no preceding pattern. */
if (laststart) goto normal_char;
PATPUSH (begline);
break;
case '*':
case '+':
case '?':
/* If there is no previous pattern, char not special. */
if (!laststart)
goto normal_char;
/* If there is a sequence of repetition chars,
collapse it down to equivalent to just one. */
zero_times_ok = 0;
many_times_ok = 0;
while (1)
{
zero_times_ok |= c != '+';
many_times_ok |= c != '?';
if (p == pend)
break;
PATFETCH (c);
if (!(c == '*' || c == '+' || c == '?'))
{
PATUNFETCH;
break;
}
}
/* Now we know whether 0 matches is allowed,
and whether 2 or more matches is allowed. */
if (many_times_ok)
{
/* If more than one repetition is allowed,
put in a backward jump at the end. */
store_jump (b, maybe_finalize_jump, laststart - 3);
b += 3;
}
insert_jump (on_failure_jump, laststart, b + 3, b);
pending_exact = 0;
b += 3;
if (!zero_times_ok)
{
/* At least one repetition required: insert before the loop
a skip over the initial on-failure-jump instruction */
insert_jump (dummy_failure_jump, laststart, laststart + 6, b);
b += 3;
}
break;
case '.':
laststart = b;
PATPUSH (anychar);
break;
case '[':
if (b - bufp->buffer
> bufp->allocated - 3 - (1 << BYTEWIDTH) / BYTEWIDTH)
/* Note that EXTEND_BUFFER clobbers c */
EXTEND_BUFFER;
laststart = b;
if (*p == '^')
PATPUSH (charset_not), p++;
else
PATPUSH (charset);
p1 = p;
PATPUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
/* Clear the whole map */
bzero (b, (1 << BYTEWIDTH) / BYTEWIDTH);
/* Read in characters and ranges, setting map bits */
while (1)
{
PATFETCH (c);
if (c == ']' && p != p1 + 1) break;
if (*p == '-')
{
PATFETCH (c1);
PATFETCH (c1);
while (c <= c1)
b[c / BYTEWIDTH] |= 1 << (c % BYTEWIDTH), c++;
}
else
{
b[c / BYTEWIDTH] |= 1 << (c % BYTEWIDTH);
}
}
/* Discard any bitmap bytes that are all 0 at the end of the map.
Decrement the map-length byte too. */
while (b[-1] > 0 && b[b[-1] - 1] == 0)
b[-1]--;
b += b[-1];
break;
case '\\':
if (p == pend) goto invalid_pattern;
PATFETCH_RAW (c);
switch (c)
{
case '(':
if (stackp == stacke) goto nesting_too_deep;
if (regnum < RE_NREGS)
{
PATPUSH (start_memory);
PATPUSH (regnum);
}
*stackp++ = b - bufp->buffer;
*stackp++ = fixup_jump ? fixup_jump - bufp->buffer + 1 : 0;
*stackp++ = regnum++;
*stackp++ = begalt - bufp->buffer;
fixup_jump = 0;
laststart = 0;
begalt = b;
break;
case ')':
if (stackp == stackb) goto unmatched_close;
begalt = *--stackp + bufp->buffer;
if (fixup_jump)
store_jump (fixup_jump, jump, b);
if (stackp[-1] < RE_NREGS)
{
PATPUSH (stop_memory);
PATPUSH (stackp[-1]);
}
stackp -= 2;
fixup_jump = 0;
if (*stackp)
fixup_jump = *stackp + bufp->buffer - 1;
laststart = *--stackp + bufp->buffer;
break;
case '|':
insert_jump (on_failure_jump, begalt, b + 6, b);
pending_exact = 0;
b += 3;
if (fixup_jump)
store_jump (fixup_jump, jump, b);
fixup_jump = b;
b += 3;
laststart = 0;
begalt = b;
break;
#ifdef emacs
case '=':
PATPUSH (at_dot);
break;
case 's':
laststart = b;
PATPUSH (syntaxspec);
PATFETCH (c);
PATPUSH (syntax_spec_code[c]);
break;
case 'S':
laststart = b;
PATPUSH (notsyntaxspec);
PATFETCH (c);
PATPUSH (syntax_spec_code[c]);
break;
#endif emacs
case 'w':
laststart = b;
PATPUSH (wordchar);
break;
case 'W':
laststart = b;
PATPUSH (notwordchar);
break;
case '<':
PATPUSH (wordbeg);
break;
case '>':
PATPUSH (wordend);
break;
case 'b':
PATPUSH (wordbound);
break;
case 'B':
PATPUSH (notwordbound);
break;
case '`':
PATPUSH (begbuf);
break;
case '\'':
PATPUSH (endbuf);
break;
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
c1 = c - '0';
if (c1 >= regnum)
goto normal_char;
for (stackt = stackp - 2; stackt > stackb; stackt -= 4)
if (*stackt == c1)
goto normal_char;
laststart = b;
PATPUSH (duplicate);
PATPUSH (c1);
break;
default:
goto normal_char;
}
break;
default:
normal_char:
if (!pending_exact || pending_exact + *pending_exact + 1 != b
|| *pending_exact == 0177 || *p == '*' || *p == '^'
|| *p == '+' || *p == '?')
{
laststart = b;
PATPUSH (exactn);
pending_exact = b;
PATPUSH (0);
}
PATPUSH (c);
(*pending_exact)++;
}
}
if (fixup_jump)
store_jump (fixup_jump, jump, b);
if (stackp != stackb) goto unmatched_open;
bufp->used = b - bufp->buffer;
return 0;
invalid_pattern:
return "Invalid regular expression";
unmatched_open:
return "Unmatched \\(";
unmatched_close:
return "Unmatched \\)";
end_of_pattern:
return "Premature end of regular expression";
nesting_too_deep:
return "Nesting too deep";
too_big:
return "Regular expression too big";
memory_exhausted:
return "Memory exhausted";
}
/* Store where `from' points a jump operation to jump to where `to' points.
`opcode' is the opcode to store. */
static int
store_jump (from, opcode, to)
char *from, *to;
char opcode;
{
from[0] = opcode;
from[1] = (to - (from + 3)) & 0377;
from[2] = (to - (from + 3)) >> 8;
}
/* Open up space at char FROM, and insert there a jump to TO.
CURRENT_END gives te end of the storage no in use,
so we know how much data to copy up.
OP is the opcode of the jump to insert.
If you call this function, you must zero out pending_exact. */
static int
insert_jump (op, from, to, current_end)
char op;
char *from, *to, *current_end;
{
register char *pto = current_end + 3;
register char *pfrom = current_end;
while (pfrom != from)
*--pto = *--pfrom;
store_jump (from, op, to);
}
/* Given a pattern, compute a fastmap from it.
The fastmap records which of the (1 << BYTEWIDTH) possible characters
can start a string that matches the pattern.
This fastmap is used by re_search to skip quickly over totally implausible text.
The caller must supply the address of a (1 << BYTEWIDTH)-byte data area
as bufp->fastmap.
The other components of bufp describe the pattern to be used. */
VOID
re_compile_fastmap (bufp)
struct re_pattern_buffer *bufp;
{
unsigned char *pattern = (unsigned char *) bufp->buffer;
int size = bufp->used;
register char *fastmap = bufp->fastmap;
register unsigned char *p = pattern;
register unsigned char *pend = pattern + size;
register int j, k;
unsigned char *translate = (unsigned char *) bufp->translate;
unsigned char *stackb[NFAILURES];
unsigned char **stackp = stackb;
bzero (fastmap, (1 << BYTEWIDTH));
bufp->fastmap_accurate = 1;
bufp->can_be_null = 0;
while (p)
{
if (p == pend)
{
bufp->can_be_null = 1;
break;
}
switch ((regexpcode) *p++)
{
case exactn:
if (translate)
fastmap[translate[p[1]]] = 1;
else
fastmap[p[1]] = 1;
break;
case begline:
case before_dot:
case at_dot:
case after_dot:
case begbuf:
case endbuf:
case wordbound:
case notwordbound:
case wordbeg:
case wordend:
continue;
case endline:
if (translate)
fastmap[translate['\n']] = 1;
else
fastmap['\n'] = 1;
bufp->can_be_null = 1;
break;
case finalize_jump:
case maybe_finalize_jump:
case jump:
case dummy_failure_jump:
bufp->can_be_null = 1;
j = *p++ & 0377;
j += SIGN_EXTEND_CHAR (*(char *)p++) << 8;
p += j;
if (j > 0)
continue;
/* Jump backward reached implies we just went through
the body of a loop and matched nothing.
Opcode jumped to should be an on_failure_jump.
Just treat it like an ordinary jump.
For a * loop, it has pushed its failure point already;
if so, discard that as redundant. */
if ((regexpcode) *p != on_failure_jump)
continue;
p++;
j = *p++ & 0377;
j += SIGN_EXTEND_CHAR (*(char *)p++) << 8;
p += j;
if (stackp != stackb && *stackp == p)
stackp--;
continue;
case on_failure_jump:
j = *p++ & 0377;
j += SIGN_EXTEND_CHAR (*(char *)p++) << 8;
*++stackp = p + j;
continue;
case start_memory:
case stop_memory:
p++;
continue;
case duplicate:
bufp->can_be_null = 1;
fastmap['\n'] = 1;
case anychar:
for (j = 0; j < (1 << BYTEWIDTH); j++)
if (j != '\n')
fastmap[j] = 1;
if (bufp->can_be_null)
return;
/* Don't return; check the alternative paths
so we can set can_be_null if appropriate. */
break;
case wordchar:
for (j = 0; j < (1 << BYTEWIDTH); j++)
if (SYNTAX (j) == Sword)
fastmap[j] = 1;
break;
case notwordchar:
for (j = 0; j < (1 << BYTEWIDTH); j++)
if (SYNTAX (j) != Sword)
fastmap[j] = 1;
break;
#ifdef emacs
case syntaxspec:
k = *p++;
for (j = 0; j < (1 << BYTEWIDTH); j++)
if (SYNTAX (j) == (enum syntaxcode) k)
fastmap[j] = 1;
break;
case notsyntaxspec:
for (j = 0; j < (1 << BYTEWIDTH); j++)
if (SYNTAX (j) != (enum syntaxcode) k)
fastmap[j] = 1;
break;
#endif emacs
case charset:
for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
{
if (translate)
fastmap[translate[j]] = 1;
else
fastmap[j] = 1;
}
break;
case charset_not:
/* Chars beyond end of map must be allowed */
for (j = *p * BYTEWIDTH; j < (1 << BYTEWIDTH); j++)
if (translate)
fastmap[translate[j]] = 1;
else
fastmap[j] = 1;
for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
if (!(p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH))))
{
if (translate)
fastmap[translate[j]] = 1;
else
fastmap[j] = 1;
}
break;
}
/* Get here means we have successfully found the possible starting characters
of one path of the pattern. We need not follow this path any farther.
Instead, look at the next alternative remembered in the stack. */
if (stackp != stackb)
p = *stackp--;
else
break;
}
}
/* Like re_search_2, below, but only one string is specified. */
int
re_search (pbufp, string, size, startpos, range, regs)
struct re_pattern_buffer *pbufp;
char *string;
int size, startpos, range;
struct re_registers *regs;
{
return re_search_2 (pbufp, 0, 0, string, size, startpos, range, regs, size);
}
/* Like re_match_2 but tries first a match starting at index `startpos',
then at startpos + 1, and so on.
`range' is the number of places to try before giving up.
If `range' is negative, the starting positions tried are
startpos, startpos - 1, etc.
It is up to the caller to make sure that range is not so large
as to take the starting position outside of the input strings.
The value returned is the position at which the match was found,
or -1 if no match was found. */
int
re_search_2 (pbufp, string1, size1, string2, size2, startpos, range, regs, mstop)
struct re_pattern_buffer *pbufp;
char *string1, *string2;
int size1, size2;
int startpos;
register int range;
struct re_registers *regs;
int mstop;
{
register char *fastmap = pbufp->fastmap;
register char *translate = pbufp->translate;
int total = size1 + size2;
/* Update the fastmap now if not correct already */
if (fastmap && !pbufp->fastmap_accurate)
re_compile_fastmap (pbufp);
while (1)
{
/* If a fastmap is supplied, skip quickly over characters
that cannot possibly be the start of a match.
Note, however, that if the pattern can possibly match
the null string, we must test it at each starting point
so that we take the first null string we get. */
if (fastmap && startpos < total && !pbufp->can_be_null)
{
if (range > 0)
{
register int lim = 0;
register char *p;
int irange = range;
if (startpos < size1 && startpos + range >= size1)
lim = range - (size1 - startpos);
p = &(startpos >= size1 ? string2 - size1 : string1)[startpos];
if (translate)
{
while (range > lim && !fastmap[translate[*p++]])
range--;
}
else
{
while (range > lim && !fastmap[*p++])
range--;
}
startpos += irange - range;
}
else
{
register char c;
if (startpos >= size1) c = string2[startpos - size1];
else c = string1[startpos];
if (translate ? !fastmap[translate[c]] : !fastmap[c])
goto advance;
}
}
if (range >= 0 && startpos == total
&& fastmap && !pbufp->can_be_null)
return -1;
if (0 <= re_match_2 (pbufp, string1, size1, string2, size2, startpos, regs, mstop))
return startpos;
#ifdef C_ALLOCA
alloca (0);
#endif /* C_ALLOCA */
advance:
if (!range) break;
if (range > 0) range--, startpos++; else range++, startpos--;
}
return -1;
}
#ifndef emacs /* emacs never uses this */
int
re_match (pbufp, string, size, pos, regs)
struct re_pattern_buffer *pbufp;
char *string;
int size, pos;
struct re_registers *regs;
{
return re_match_2 (pbufp, 0, 0, string, size, pos, regs, size);
}
#endif /* emacs */
/* Match the pattern described by `pbufp'
against data which is the virtual concatenation of `string1' and `string2'.
`size1' and `size2' are the sizes of the two data strings.
Start the match at position `pos'.
Do not consider matching past the position `mstop'.
If pbufp->fastmap is nonzero, then it had better be up to date.
The reason that the data to match is specified as two components
which are to be regarded as concatenated
is so that this function can be used directly on the contents of an Emacs buffer.
-1 is returned if there is no match. Otherwise the value is the length
of the substring which was matched.
*/
int
re_match_2 (pbufp, string1, size1, string2, size2, pos, regs, mstop)
struct re_pattern_buffer *pbufp;
char *string1, *string2;
int size1, size2;
int pos;
struct re_registers *regs;
int mstop;
{
register char *p = pbufp->buffer;
register char *pend = p + pbufp->used;
/* End of first string */
char *end1;
/* End of second string */
char *end2;
/* Pointer just past last char to consider matching */
char *end_match_1, *end_match_2;
register char *d, *dend;
register int mcnt;
char *translate = pbufp->translate;
/* Failure point stack. Each place that can handle a failure further down the line
pushes a failure point on this stack. It consists of two char *'s.
The first one pushed is where to resume scanning the pattern;
the second pushed is where to resume scanning the strings.
If the latter is zero, the failure point is a "dummy".
If a failure happens and the innermost failure point is dormant,
it discards that failure point and tries the next one. */
char **stackb = (char **) alloca (2 * NFAILURES * sizeof (char *));
char **stackp = stackb, **stacke = &stackb[2 * NFAILURES];
/* Information on the "contents" of registers.
These are pointers into the input strings; they record
just what was matched (on this attempt) by some part of the pattern.
The start_memory command stores the start of a register's contents
and the stop_memory command stores the end.
At that point, regstart[regnum] points to the first character in the register,
regend[regnum] points to the first character beyond the end of the register,
and regstart_segend[regnum] is either the same as regend[regnum]
or else points to the end of the input string into which regstart[regnum] points.
The latter case happens when regstart[regnum] is in string1 and
regend[regnum] is in string2. */
char *regstart[RE_NREGS];
char *regstart_segend[RE_NREGS];
char *regend[RE_NREGS];
/* Set up pointers to ends of strings.
Don't allow the second string to be empty unless both are empty. */
if (!size2)
{
string2 = string1;
size2 = size1;
string1 = 0;
size1 = 0;
}
end1 = string1 + size1;
end2 = string2 + size2;
/* Compute where to stop matching, within the two strings */
if (mstop <= size1)
{
end_match_1 = string1 + mstop;
end_match_2 = string2;
}
else
{
end_match_1 = end1;
end_match_2 = string2 + mstop - size1;
}
/* Initialize \( and \) text positions to -1
to mark ones that no \( or \) has been seen for. */
for (mcnt = 0; mcnt < sizeof (regstart) / sizeof (*regstart); mcnt++)
regstart[mcnt] = (char *) -1;
/* `p' scans through the pattern as `d' scans through the data.
`dend' is the end of the input string that `d' points within.
`d' is advanced into the following input string whenever necessary,
but this happens before fetching;
therefore, at the beginning of the loop,
`d' can be pointing at the end of a string,
but it cannot equal string2. */
if (pos <= size1)
d = string1 + pos, dend = end_match_1;
else
d = string2 + pos - size1, dend = end_match_2;
/* Write PREFETCH; just before fetching a character with *d. */
#define PREFETCH \
while (d == dend) \
{ if (dend == end_match_2) goto fail; /* end of string2 => failure */ \
d = string2; /* end of string1 => advance to string2. */ \
dend = end_match_2; }
/* This loop loops over pattern commands.
It exits by returning from the function if match is complete,
or it drops through if match fails at this starting point in the input data. */
while (1)
{
if (p == pend)
/* End of pattern means we have succeeded! */
{
/* If caller wants register contents data back, convert it to indices */
if (regs)
{
regend[0] = d;
regstart[0] = string1;
for (mcnt = 0; mcnt < RE_NREGS; mcnt++)
{
if ((mcnt != 0) && regstart[mcnt] == (char *) -1)
{
regs->start[mcnt] = -1;
regs->end[mcnt] = -1;
continue;
}
if (regstart[mcnt] - string1 < 0 ||
regstart[mcnt] - string1 > size1)
regs->start[mcnt] = regstart[mcnt] - string2 + size1;
else
regs->start[mcnt] = regstart[mcnt] - string1;
if (regend[mcnt] - string1 < 0 ||
regend[mcnt] - string1 > size1)
regs->end[mcnt] = regend[mcnt] - string2 + size1;
else
regs->end[mcnt] = regend[mcnt] - string1;
}
regs->start[0] = pos;
}
if (d - string1 >= 0 && d - string1 <= size1)
return d - string1 - pos;
else
return d - string2 + size1 - pos;
}
/* Otherwise match next pattern command */
switch ((regexpcode) *p++)
{
/* \( is represented by a start_memory, \) by a stop_memory.
Both of those commands contain a "register number" argument.
The text matched within the \( and \) is recorded under that number.
Then, \<digit> turns into a `duplicate' command which
is followed by the numeric value of <digit> as the register number. */
case start_memory:
regstart[*p] = d;
regstart_segend[*p++] = dend;
break;
case stop_memory:
regend[*p] = d;
if (regstart_segend[*p] == dend)
regstart_segend[*p] = d;
p++;
break;
case duplicate:
{
int regno = *p++; /* Get which register to match against */
register char *d2, *dend2;
d2 = regstart[regno];
dend2 = regstart_segend[regno];
while (1)
{
/* Advance to next segment in register contents, if necessary */
while (d2 == dend2)
{
if (dend2 == end_match_2) break;
if (dend2 == regend[regno]) break;
d2 = string2, dend2 = regend[regno]; /* end of string1 => advance to string2. */
}
/* At end of register contents => success */
if (d2 == dend2) break;
/* Advance to next segment in data being matched, if necessary */
PREFETCH;
/* mcnt gets # consecutive chars to compare */
mcnt = dend - d;
if (mcnt > dend2 - d2)
mcnt = dend2 - d2;
/* Compare that many; failure if mismatch, else skip them. */
if (translate ? bcmp_translate (d, d2, mcnt, translate) : bcmp (d, d2, mcnt))
goto fail;
d += mcnt, d2 += mcnt;
}
}
break;
case anychar:
/* fetch a data character */
PREFETCH;
/* Match anything but a newline. */
if ((translate ? translate[*d++] : *d++) == '\n')
goto fail;
break;
case charset:
case charset_not:
{
/* Nonzero for charset_not */
int not = 0;
register int c;
if (*(p - 1) == (char) charset_not)
not = 1;
/* fetch a data character */
PREFETCH;
if (translate)
c = translate [*(unsigned char *)d];
else
c = *(unsigned char *)d;
if (c < *p * BYTEWIDTH
&& p[1 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
not = !not;
p += 1 + *p;
if (!not) goto fail;
d++;
break;
}
case begline:
if (d == string1 || d[-1] == '\n')
break;
goto fail;
case endline:
if (d == end2
|| (d == end1 ? (size2 == 0 || *string2 == '\n') : *d == '\n'))
break;
goto fail;
/* "or" constructs ("|") are handled by starting each alternative
with an on_failure_jump that points to the start of the next alternative.
Each alternative except the last ends with a jump to the joining point.
(Actually, each jump except for the last one really jumps
to the following jump, because tensioning the jumps is a hassle.) */
/* The start of a stupid repeat has an on_failure_jump that points
past the end of the repeat text.
This makes a failure point so that, on failure to match a repetition,
matching restarts past as many repetitions have been found
with no way to fail and look for another one. */
/* A smart repeat is similar but loops back to the on_failure_jump
so that each repetition makes another failure point. */
case on_failure_jump:
if (stackp == stacke)
{
char **stackx = (char **) alloca (2 * (stacke - stackb) * sizeof (char *));
bcopy (stackb, stackx, (stacke - stackb) * sizeof (char *));
stackp += stackx - stackb;
stacke = stackx + 2 * (stacke - stackb);
stackb = stackx;
}
mcnt = *p++ & 0377;
mcnt += SIGN_EXTEND_CHAR (*p++) << 8;
*stackp++ = mcnt + p;
*stackp++ = d;
break;
/* The end of a smart repeat has an maybe_finalize_jump back.
Change it either to a finalize_jump or an ordinary jump. */
case maybe_finalize_jump:
mcnt = *p++ & 0377;
mcnt += SIGN_EXTEND_CHAR (*p++) << 8;
/* Compare what follows with the begining of the repeat.
If we can establish that there is nothing that they would
both match, we can change to finalize_jump */
if (p == pend)
p[-3] = (char) finalize_jump;
else if (*p == (char) exactn || *p == (char) endline)
{
register int c = *p == (char) endline ? '\n' : p[2];
register char *p1 = p + mcnt;
/* p1[0] ... p1[2] are an on_failure_jump.
Examine what follows that */
if (p1[3] == (char) exactn && p1[5] != c)
p[-3] = (char) finalize_jump;
else if (p1[3] == (char) charset || p1[3] == (char) charset_not)
{
int not = p1[3] == (char) charset_not;
if (c < p1[4] * BYTEWIDTH
&& p1[5 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
not = !not;
/* not is 1 if c would match */
/* That means it is not safe to finalize */
if (!not)
p[-3] = (char) finalize_jump;
}
}
p -= 2;
if (p[-1] != (char) finalize_jump)
{
p[-1] = (char) jump;
goto nofinalize;
}
/* The end of a stupid repeat has a finalize-jump
back to the start, where another failure point will be made
which will point after all the repetitions found so far. */
case finalize_jump:
stackp -= 2;
case jump:
nofinalize:
mcnt = *p++ & 0377;
mcnt += SIGN_EXTEND_CHAR (*p++) << 8;
p += mcnt;
break;
case dummy_failure_jump:
if (stackp == stacke)
{
char **stackx = (char **) alloca (2 * (stacke - stackb) * sizeof (char *));
bcopy (stackb, stackx, (stacke - stackb) * sizeof (char *));
stackp += stackx - stackb;
stacke = stackx + 2 * (stacke - stackb);
stackb = stackx;
}
*stackp++ = 0;
*stackp++ = 0;
goto nofinalize;
case wordbound:
if (d == string1 /* Points to first char */
|| d == end2 /* Points to end */
|| (d == end1 && size2 == 0)) /* Points to end */
break;
if ((SYNTAX (((unsigned char *)d)[-1]) == Sword)
!= (SYNTAX (d == end1 ? *(unsigned char *)string2 : *(unsigned char *)d) == Sword))
break;
goto fail;
case notwordbound:
if (d == string1 /* Points to first char */
|| d == end2 /* Points to end */
|| (d == end1 && size2 == 0)) /* Points to end */
goto fail;
if ((SYNTAX (((unsigned char *)d)[-1]) == Sword)
!= (SYNTAX (d == end1 ? *(unsigned char *)string2 : *(unsigned char *)d) == Sword))
goto fail;
break;
case wordbeg:
if (d == end2 /* Points to end */
|| (d == end1 && size2 == 0) /* Points to end */
|| SYNTAX (*(unsigned char *) (d == end1 ? string2 : d)) != Sword) /* Next char not a letter */
goto fail;
if (d == string1 /* Points to first char */
|| SYNTAX (((unsigned char *)d)[-1]) != Sword) /* prev char not letter */
break;
goto fail;
case wordend:
if (d == string1 /* Points to first char */
|| SYNTAX (((unsigned char *)d)[-1]) != Sword) /* prev char not letter */
goto fail;
if (d == end2 /* Points to end */
|| (d == end1 && size2 == 0) /* Points to end */
|| SYNTAX (d == end1 ? *(unsigned char *)string2 : *(unsigned char *)d) != Sword) /* Next char not a letter */
break;
goto fail;
#ifdef emacs
case before_dot:
if (((d - string2 <= (unsigned) size2)
? d - (char *) bf_p2 : d - (char *) bf_p1)
<= point)
goto fail;
break;
case at_dot:
if (((d - string2 <= (unsigned) size2)
? d - (char *) bf_p2 : d - (char *) bf_p1)
== point)
goto fail;
break;
case after_dot:
if (((d - string2 <= (unsigned) size2)
? d - (char *) bf_p2 : d - (char *) bf_p1)
>= point)
goto fail;
break;
case wordchar:
mcnt = (int) Sword;
goto matchsyntax;
case syntaxspec:
mcnt = *p++;
matchsyntax:
PREFETCH;
if (SYNTAX (*(unsigned char *)d++) != (enum syntaxcode) mcnt) goto fail;
break;
case notwordchar:
mcnt = (int) Sword;
goto matchnotsyntax;
case notsyntaxspec:
mcnt = *p++;
matchnotsyntax:
PREFETCH;
if (SYNTAX (*(unsigned char *)d++) == (enum syntaxcode) mcnt) goto fail;
break;
#else
case wordchar:
PREFETCH;
if (SYNTAX (*(unsigned char *)d++) == 0) goto fail;
break;
case notwordchar:
PREFETCH;
if (SYNTAX (*(unsigned char *)d++) != 0) goto fail;
break;
#endif not emacs
case begbuf:
if (d == string1) /* Note, d cannot equal string2 */
break; /* unless string1 == string2. */
goto fail;
case endbuf:
if (d == end2 || (d == end1 && size2 == 0))
break;
goto fail;
case exactn:
/* Match the next few pattern characters exactly.
mcnt is how many characters to match. */
mcnt = *p++;
if (translate)
{
do
{
PREFETCH;
if (translate[*(unsigned char *)d++] != *p++) goto fail;
}
while (--mcnt);
}
else
{
do
{
PREFETCH;
if (*d++ != *p++) goto fail;
}
while (--mcnt);
}
break;
}
continue; /* Successfully matched one pattern command; keep matching */
/* Jump here if any matching operation fails. */
fail:
if (stackp != stackb)
/* A restart point is known. Restart there and pop it. */
{
if (!stackp[-2])
{ /* If innermost failure point is dormant, flush it and keep looking */
stackp -= 2;
goto fail;
}
d = *--stackp;
p = *--stackp;
if (d >= string1 && d <= end1)
dend = end_match_1;
}
else break; /* Matching at this starting point really fails! */
}
return -1; /* Failure to match */
}
static int
bcmp_translate (s1, s2, len, translate)
char *s1, *s2;
register int len;
char *translate;
{
register char *p1 = s1, *p2 = s2;
while (len)
{
if (translate [*p1++] != translate [*p2++]) return 1;
len--;
}
return 0;
}
/* Entry points compatible with bsd4.2 regex library */
#ifndef emacs
static struct re_pattern_buffer re_comp_buf;
char *
re_comp (s)
char *s;
{
if (!s)
{
if (!re_comp_buf.buffer)
return "No previous regular expression";
return 0;
}
if (!re_comp_buf.buffer)
{
if (!(re_comp_buf.buffer = (char *) malloc (200)))
return "Memory exhausted";
re_comp_buf.allocated = 200;
if (!(re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH)))
return "Memory exhausted";
}
return re_compile_pattern (s, strlen (s), &re_comp_buf);
}
int
re_exec (s)
char *s;
{
int len = strlen (s);
return 0 <= re_search (&re_comp_buf, s, len, 0, len, 0);
}
#endif /* emacs */
#ifdef test
#include <stdio.h>
/* Indexed by a character, gives the upper case equivalent of the character */
static char upcase[0400] =
{ 000, 001, 002, 003, 004, 005, 006, 007,
010, 011, 012, 013, 014, 015, 016, 017,
020, 021, 022, 023, 024, 025, 026, 027,
030, 031, 032, 033, 034, 035, 036, 037,
040, 041, 042, 043, 044, 045, 046, 047,
050, 051, 052, 053, 054, 055, 056, 057,
060, 061, 062, 063, 064, 065, 066, 067,
070, 071, 072, 073, 074, 075, 076, 077,
0100, 0101, 0102, 0103, 0104, 0105, 0106, 0107,
0110, 0111, 0112, 0113, 0114, 0115, 0116, 0117,
0120, 0121, 0122, 0123, 0124, 0125, 0126, 0127,
0130, 0131, 0132, 0133, 0134, 0135, 0136, 0137,
0140, 0101, 0102, 0103, 0104, 0105, 0106, 0107,
0110, 0111, 0112, 0113, 0114, 0115, 0116, 0117,
0120, 0121, 0122, 0123, 0124, 0125, 0126, 0127,
0130, 0131, 0132, 0173, 0174, 0175, 0176, 0177,
0200, 0201, 0202, 0203, 0204, 0205, 0206, 0207,
0210, 0211, 0212, 0213, 0214, 0215, 0216, 0217,
0220, 0221, 0222, 0223, 0224, 0225, 0226, 0227,
0230, 0231, 0232, 0233, 0234, 0235, 0236, 0237,
0240, 0241, 0242, 0243, 0244, 0245, 0246, 0247,
0250, 0251, 0252, 0253, 0254, 0255, 0256, 0257,
0260, 0261, 0262, 0263, 0264, 0265, 0266, 0267,
0270, 0271, 0272, 0273, 0274, 0275, 0276, 0277,
0300, 0301, 0302, 0303, 0304, 0305, 0306, 0307,
0310, 0311, 0312, 0313, 0314, 0315, 0316, 0317,
0320, 0321, 0322, 0323, 0324, 0325, 0326, 0327,
0330, 0331, 0332, 0333, 0334, 0335, 0336, 0337,
0340, 0341, 0342, 0343, 0344, 0345, 0346, 0347,
0350, 0351, 0352, 0353, 0354, 0355, 0356, 0357,
0360, 0361, 0362, 0363, 0364, 0365, 0366, 0367,
0370, 0371, 0372, 0373, 0374, 0375, 0376, 0377
};
main ()
{
char pat[80];
struct re_pattern_buffer buf;
struct re_registers regs;
int i;
char c;
char fastmap[(1 << BYTEWIDTH)];
buf.allocated = 40;
buf.buffer = (char *) malloc (buf.allocated);
buf.fastmap = fastmap;
buf.translate = upcase;
while (1)
{
printf("Enter pattern\n");
gets (pat);
if (*pat)
{
re_compile_pattern (pat, strlen(pat), &buf);
for (i = 0; i < buf.used; i++)
printchar (buf.buffer[i]);
putchar ('\n');
printf ("%d allocated, %d used.\n", buf.allocated, buf.used);
re_compile_fastmap (&buf);
printf ("Allowed by fastmap: ");
for (i = 0; i < (1 << BYTEWIDTH); i++)
if (fastmap[i]) printchar (i);
putchar ('\n');
}
printf("enter string to search\n");
gets (pat); /* Now read the string to match against */
/* i = re_match (&buf, pat, strlen (pat), 0, 0); */
i = re_search (&buf, pat, strlen (pat), 0, strlen (pat), ®s);
printf ("Match value %d.\n", i);
for (i=0; i < RE_NREGS; i++)
printf("%2d start %2d end %2d\n", i, regs.start[i], regs.end[i]);
}
}
#ifdef NOTDEF
print_buf (bufp)
struct re_pattern_buffer *bufp;
{
int i;
printf ("buf is :\n----------------\n");
for (i = 0; i < bufp->used; i++)
printchar (bufp->buffer[i]);
printf ("\n%d allocated, %d used.\n", bufp->allocated, bufp->used);
printf ("Allowed by fastmap: ");
for (i = 0; i < (1 << BYTEWIDTH); i++)
if (bufp->fastmap[i])
printchar (i);
printf ("\nAllowed by translate: ");
if (bufp->translate)
for (i = 0; i < (1 << BYTEWIDTH); i++)
if (bufp->translate[i])
printchar (i);
printf ("\nfastmap is%s accurate\n", bufp->fastmap_accurate ? "" : "n't");
printf ("can %s be null\n----------", bufp->can_be_null ? "" : "not");
}
#endif
printchar (c)
char c;
{
if (c < 041 || c >= 0177)
{
putchar ('\\');
putchar (((c >> 6) & 3) + '0');
putchar (((c >> 3) & 7) + '0');
putchar ((c & 7) + '0');
}
else
putchar (c);
}
error (string)
char *string;
{
puts (string);
exit (1);
}
#endif /* test */
#endif /* REGEX */
SHAR_EOF
cat << \SHAR_EOF > macro.c
/* keyboard macros for MicroGnuEmacs 1x */
#ifndef NO_MACRO
#include "def.h"
#include "key.h"
#define EXTERN
#define INIT(i) = (i)
#include "macro.h"
/*ARGSUSED*/
definemacro(f, n)
int f, n;
{
register LINE *lp1;
LINE *lp2;
macrocount = 0;
if(macrodef) {
ewprintf("already defining macro");
return macrodef = FALSE;
}
/* free lines allocated for string arguments */
if(maclhead != NULL) {
for(lp1 = maclhead->l_fp; lp1 != maclhead; lp1 = lp2) {
lp2 = lp1->l_fp;
free((char *)lp1);
}
free((char *)lp1);
}
if((maclhead = lp1 = lalloc(0)) == NULL) return FALSE;
ewprintf("Defining Keyboard Macro...");
maclcur = lp1->l_fp = lp1->l_bp = lp1;
return macrodef = TRUE;
}
/*ARGSUSED*/
finishmacro(f, n)
int f, n;
{
macrodef = FALSE;
ewprintf("End Keyboard Macro Definition");
return TRUE;
}
/*ARGSUSED*/
executemacro(f, n)
int f, n;
{
int i, j;
PF funct;
int universal_argument();
int flag, num;
if(macrodef ||
(macrocount >= MAXMACRO && macro[MAXMACRO].m_funct != finishmacro))
return FALSE;
if(macrocount == 0) return TRUE;
inmacro = TRUE;
for(i = n; i > 0; i--) {
maclcur = maclhead->l_fp;
flag = 0;
num = 1;
for(j = 0; j < macrocount-1; j++) {
funct = macro[j].m_funct;
if(funct == universal_argument) {
flag = FFARG;
num = macro[++j].m_count;
continue;
}
if((*funct)(flag, num) != TRUE) {
inmacro = FALSE;
return FALSE;
}
lastflag = thisflag;
thisflag = 0;
flag = 0;
num = 1;
}
}
inmacro = FALSE;
return TRUE;
}
#endif
SHAR_EOF
cat << \SHAR_EOF > sys/bsd/fileio.c
/*
* bsd (4.2, others?), Sun (3.2, ?) and Ultrix-32 (?) file I/O.
*/
#include "def.h"
static FILE *ffp;
extern char *getenv(), *strncpy();
char *adjustname();
/*
* Open a file for reading.
*/
ffropen(fn) char *fn; {
if ((ffp=fopen(fn, "r")) == NULL)
return (FIOFNF);
return (FIOSUC);
}
/*
* Open a file for writing.
* Return TRUE if all is well, and
* FALSE on error (cannot create).
*/
ffwopen(fn) char *fn; {
if ((ffp=fopen(fn, "w")) == NULL) {
ewprintf("Cannot open file for writing");
return (FIOERR);
}
return (FIOSUC);
}
/*
* Close a file.
* Should look at the status.
*/
ffclose() {
(VOID) fclose(ffp);
return (FIOSUC);
}
/*
* Write a buffer to the already
* opened file. bp points to the
* buffer. Return the status.
* Check only at the newline and
* end of buffer.
*/
ffputbuf(bp)
BUFFER *bp;
{
register char *cp;
register char *cpend;
register LINE *lp;
register LINE *lpend;
lpend = bp->b_linep;
lp = lforw(lpend);
do {
cp = <ext(lp)[0]; /* begining of line */
cpend = &cp[llength(lp)]; /* end of line */
while(cp != cpend) {
putc(*cp, ffp);
cp++; /* putc may evalualte arguments more than once */
}
lp = lforw(lp);
if(lp == lpend) break; /* no implied newline on last line */
putc('\n', ffp);
} while(!ferror(ffp));
if(ferror(ffp)) {
ewprintf("Write I/O error");
return FIOERR;
}
return FIOSUC;
}
/*
* Read a line from a file, and store the bytes
* in the supplied buffer. Stop on end of file or end of
* line. When FIOEOF is returned, there is a valid line
* of data without the normally implied \n.
*/
ffgetline(buf, nbuf, nbytes)
register char *buf;
register int nbuf;
register int *nbytes;
{
register int c;
register int i;
i = 0;
while((c = getc(ffp))!=EOF && c!='\n') {
buf[i++] = c;
if (i >= nbuf) return FIOLONG;
}
if (c == EOF && ferror(ffp) != FALSE) {
ewprintf("File read error");
return FIOERR;
}
*nbytes = i;
return c==EOF ? FIOEOF : FIOSUC;
}
#ifndef NO_BACKUP
/*
* Rename the file "fname" into a backup
* copy. On Unix the backup has the same name as the
* original file, with a "~" on the end; this seems to
* be newest of the new-speak. The error handling is
* all in "file.c". The "unlink" is perhaps not the
* right thing here; I don't care that much as
* I don't enable backups myself.
*/
fbackupfile(fn) char *fn; {
register char *nname;
char *malloc();
if ((nname=malloc((unsigned)(strlen(fn)+1+1))) == NULL) {
ewprintf("Can't get %d bytes", strlen(fn) + 1);
return (ABORT);
}
(void) strcpy(nname, fn);
(void) strcat(nname, "~");
(void) unlink(nname); /* Ignore errors. */
if (rename(fn, nname) < 0) {
free(nname);
return (FALSE);
}
free(nname);
return (TRUE);
}
#endif
/*
* The string "fn" is a file name.
* Perform any required appending of directory name or case adjustments.
* If NO_DIR is not defined, the same file should be refered to even if the
* working directory changes.
*/
#ifdef SYMBLINK
#include <sys/types.h>
#include <sys/stat.h>
#ifndef MAXSYMLINKS
#define MAXSYMLINKS 8 /* maximum symbolic links to follow */
#endif
#endif
#include <pwd.h>
#ifndef NO_DIR
extern char *wdir;
#endif
char *adjustname(fn)
register char *fn;
{
register char *cp;
static char fnb[NFILEN];
struct passwd *pwent;
#ifdef SYMBLINK
struct stat statbuf;
int i, j;
char linkbuf[NFILEN];
#endif
switch(*fn) {
case '/':
cp = fnb;
*cp++ = *fn++;
break;
case '~':
fn++;
if(*fn == '/' || *fn == '\0') {
(VOID) strcpy(fnb, getenv("HOME"));
cp = fnb + strlen(fnb);
if(*fn) fn++;
break;
} else {
cp = fnb;
while(*fn && *fn != '/') *cp++ = *fn++;
*cp = '\0';
if((pwent = getpwnam(fnb)) != NULL) {
(VOID) strcpy(fnb, pwent->pw_dir);
cp = fnb + strlen(fnb);
break;
} else {
fn -= strlen(fnb) + 1;
/* can't find ~user, continue to default case */
}
}
default:
#ifndef NODIR
strcpy(fnb, wdir);
cp = fnb + strlen(fnb);
break;
#else
return fn; /* punt */
#endif
}
if(cp != fnb && cp[-1] != '/') *cp++ = '/';
while(*fn) {
switch(*fn) {
case '.':
switch(fn[1]) {
case '\0':
*--cp = '\0';
return fnb;
case '/':
fn += 2;
continue;
case '.':
if(fn[2]=='/' || fn[2] == '\0') {
#ifdef SYMBLINK
cp[-1] = '\0';
for(j = MAXSYMLINKS; j-- &&
lstat(fnb, &statbuf) != -1 &&
(statbuf.st_mode&S_IFMT) == S_IFLNK &&
(i = readlink(fnb, linkbuf, sizeof linkbuf))
!= -1 ;) {
if(linkbuf[0] != '/') {
--cp;
while(cp > fnb && *--cp != '/') {}
++cp;
(VOID) strncpy(cp, linkbuf, i);
cp += i;
} else {
(VOID) strncpy(fnb, linkbuf, i);
cp = fnb + i;
}
if(cp[-1]!='/') *cp++ = '\0';
else cp[-1] = '\0';
}
cp[-1] = '/';
#endif
--cp;
while(cp > fnb && *--cp != '/') {}
++cp;
if(fn[2]=='\0') {
*--cp = '\0';
return fnb;
}
fn += 3;
continue;
}
break;
default:
break;
}
break;
case '/':
fn++;
continue;
default:
break;
}
while(*fn && (*cp++ = *fn++) != '/') {}
}
if(cp[-1]=='/') --cp;
*cp = '\0';
return fnb;
}
#ifndef NO_STARTUP
#include <sys/file.h>
/*
* Find a startup file for the user and return its name. As a service
* to other pieces of code that may want to find a startup file (like
* the terminal driver in particular), accepts a suffix to be appended
* to the startup file name.
*/
char *
startupfile(suffix)
char *suffix;
{
register char *file;
static char home[NFILEN];
char *getenv();
if ((file = getenv("HOME")) == NULL) goto notfound;
if (strlen(file)+7 >= NFILEN - 1) goto notfound;
(VOID) strcpy(home, file);
(VOID) strcat(home, "/.mg");
if (suffix != NULL) {
(VOID) strcat(home, "-");
(VOID) strcat(home, suffix);
}
if (access(home, F_OK ) == 0) return home;
notfound:
#ifdef STARTUPFILE
file = STARTUPFILE;
if (suffix != NULL) {
(VOID) strcpy(home, file);
(VOID) strcat(home, "-");
(VOID) strcat(home, suffix);
file = home;
}
if (access(file, F_OK ) == 0) return file;
#endif
return NULL;
}
#endif
#ifndef NO_DIRED
#include <sys/wait.h>
#include "kbd.h"
copy(frname, toname)
char *frname, *toname;
{
int pid;
char *eargv[3];
union wait status;
if(pid = vfork()) {
if(pid == -1) return -1;
eargv[0] = frname;
eargv[1] = toname;
eargv[2] = NULL;
execve("cp", eargv, (char **)NULL);
_exit(1); /* shouldn't happen */
}
while(wait(&status) != pid) {}
return status.w_status == 0;
}
BUFFER *dired_(dirname)
char *dirname;
{
register BUFFER *bp;
char line[256];
BUFFER *findbuffer();
FILE *dirpipe;
FILE *popen();
if((dirname = adjustname(dirname)) == NULL) {
ewprintf("Bad directory name");
return NULL;
}
if(dirname[strlen(dirname)-1] != '/') (VOID) strcat(dirname, "/");
if((bp = findbuffer(dirname)) == NULL) {
ewprintf("Could not create buffer");
return NULL;
}
if(bclear(bp) != TRUE) return FALSE;
(VOID) strcpy(line, "ls -al ");
(VOID) strcpy(&line[7], dirname);
if((dirpipe = popen(line, "r")) == NULL) {
ewprintf("Problem opening pipe to ls");
return NULL;
}
line[0] = line[1] = ' ';
while(fgets(&line[2], 254, dirpipe) != NULL) {
line[strlen(line) - 1] = '\0'; /* remove ^J */
(VOID) addline(bp, line);
}
if(pclose(dirpipe) == -1) {
ewprintf("Problem closing pipe to ls");
return NULL;
}
bp->b_dotp = lforw(bp->b_linep); /* go to first line */
(VOID) strncpy(bp->b_fname, dirname, NFILEN);
if((bp->b_modes[0] = name_mode("dired")) == NULL) {
bp->b_modes[0] = &map_table[0];
ewprintf("Could not find mode dired");
return NULL;
}
bp->b_nmodes = 0;
return bp;
}
d_makename(lp, fn)
register LINE *lp;
register char *fn;
{
register char *cp;
if(llength(lp) <= 47) return ABORT;
(VOID) strcpy(fn, curbp->b_fname);
cp = fn + strlen(fn);
bcopy(&lp->l_text[47], cp, llength(lp) - 47);
cp[llength(lp) - 47] = '\0';
return lgetc(lp, 2) == 'd';
}
#endif
SHAR_EOF
# End of shell archive
exit 0
-------