allbery@uunet.UU.NET (Brandon S. Allbery - comp.sources.misc) (09/10/89)
Posting-number: Volume 8, Issue 39
Submitted-by: canoaf@ntvax.UUCP (Augustine Cano)
Archive-name: gnuplot1.10A/part05
[OOPS!!! I had to patch these after receiving them -- and managed to lose the
name of the person who submitted them in the process. Duh. The name shown
is a "best guess". Submitter, please correct me. ++bsa]
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of archive 5 (of 7)."
# Contents: unixpc.trm unixplot.trm util.c v384.trm version.c
# Wrapped by allbery@uunet on Sat Sep 9 13:47:23 1989
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'unixpc.trm' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'unixpc.trm'\"
else
echo shar: Extracting \"'unixpc.trm'\" \(12181 characters\)
sed "s/^X//" >'unixpc.trm' <<'END_OF_FILE'
X/*
XFrom: John Campbell (...!arizona!naucse!jdc)
X
XI ported gnuplot to the ATT 3b1 (ATT7300) on 12/4/88. The 3b1, as I view
Xit, is a 720x300 bitmapped, monochrome display (often people don't use
Xthe top 12 scan lines and thus the effective size is 720x288). I tried to
Xmaximize the size of the graph area, by using these top 12 lines (normally
Xreserved) and set up a signal handler to restore them upon exit, abort, etc.
X
XLine styles were "fudged" (they do not know the aspect ratio). The same
Xline style may look different depending upon the slope of the curve. Due to
Xthis only 4 line styles were implemented. While more line types are possible,
Xthe current styles were chosen as distinguishable.
X
XThe 3b1 has 4 "special" rows at the bottom that I could not use in graphics
Xmode. I chose to use these lines for the plot scale--normally found at the
Xbottom right corner of the plot. I wanted to use the four bottom lines as
Xprompt/command lines, but did not find a way to do this. If someone ever
Xwrites a device driver to "open" these rows as a small separate window, I
Xcould implement my original idea.
X*/
X
X#include <sys/window.h> /* Started with tam.h--too much trouble. */
X#include <sys/signal.h>
X#include <errno.h>
X
X#define uPC_HIGH_BIT (0x8000)
X
Xtypedef unsigned short Scr_type;
Xtypedef unsigned char Scr_kluge;
X
X#define uPC_XMAX 720
X#define uPC_YMAX 300
X
X#define uPC_XSIZE 45 /* Short ints. */
X#define uPC_YSIZE uPC_YMAX
X
XScr_type uPC_display[uPC_YSIZE][uPC_XSIZE];
Xint uPC_width = 2*uPC_XSIZE;
Xint uPC_sx=0, uPC_sy=0;
Xint uPC_cur_linetype=0;
Xunsigned short uPC_raster_count=0;
X
X#define uPC_XLAST (uPC_XMAX - 1)
X#define uPC_YLAST (uPC_YMAX - 1)
X
X#define uPC_VCHAR 12
X#define uPC_HCHAR 9
X#define uPC_VTIC 8
X#define uPC_HTIC 12
X
Xextern errno, sys_nerr;
Xextern char *sys_errlist[];
X
Xstatic struct urdata uPC_ur = {(unsigned short *)uPC_display, 2*uPC_XSIZE, 0, 0,
X 0, 0, 0, 0, uPC_XMAX, uPC_YMAX, SRCSRC, DSTOR, 0};
X
X#define IfErrOut(e1,e2,s1,s2) if (e1 e2) {\
Xfprintf(stderr, "%s:: %s %s\n", sys_errlist[errno], s1, s2);\
XuPC_fixwind(0);\
Xexit(-1);}
X
XuPC_init()
X{
X/* This routine will ioctl to change 0 size */
X int i;
X struct uwdata uw;
X int uPC_fixwind();
X short gw;
X
X/* Check that we are on the bitmapped window. */
X if (iswind() != 0) {
X fprintf (stderr, "Sorry--must run from the bitmapped terminal\n");
X exit(-1);
X }
X for (i=1; i<=16; i++) {
X if (i != SIGINT && i != SIGFPE) /* Two are caught in plot.c */
X signal (i, uPC_fixwind);
X }
X
X/* Increase the screen size */
X uw.uw_x = 0;
X uw.uw_y = 0; /* Leave room for top status line. */
X uw.uw_width = uPC_XMAX; /* 720 */
X uw.uw_height = uPC_YMAX; /* 288 normal--we clobber 12 (top row)*/
X uw.uw_uflags = 1; /* Creates with no border */
X
X IfErrOut (ioctl(0, WIOCSETD, &uw), <0, "ioctl failed on", "WIOCSETD");
X}
X
X
XuPC_graphics()
X{
X/* This routine will clear the uPC_display buffer and window. */
X register Scr_type *j;
X register int i;
X
X j = (Scr_type *)uPC_display;
X i = uPC_YSIZE*uPC_XSIZE + 1;
X
X while (--i)
X *j++ = 0;
X
X uPC_ur.ur_dstop = DSTSRC; /* replace (clear screen). */
X IfErrOut (ioctl(0, WIOCRASTOP, &uPC_ur), <0,
X "ioctl failed", "WIOCRASTOP");
X uPC_ur.ur_dstop = DSTOR; /* Or in (show text) */
X}
X
X
XuPC_text()
X{
X/* This routine will flush the display. */
X
X IfErrOut (ioctl(0, WIOCRASTOP, &uPC_ur), <0,
X "ioctl failed", "WIOCRASTOP");
X/* Now position the cursor at the second to the last row--better later? */
X wgoto (0, 24, 0);
X}
X
X
XuPC_linetype(linetype)
Xint linetype;
X{
X/* This routine records the current linetype. */
X if (uPC_cur_linetype != linetype) {
X uPC_raster_count = 0;
X uPC_cur_linetype = linetype;
X }
X}
X
X
XuPC_move(x,y)
Xunsigned int x,y;
X{
X/* This routine just records x and y in uPC_sx, uPC_sy */
X uPC_sx = x;
X uPC_sy = y;
X}
X
X
X/* Was just (*(a)|=(b)) */
X#define uPC_PLOT(a,b) (uPC_cur_linetype != 0 ? uPC_plot_word (a,b) :\
X *(a)|=(b))
X
XuPC_plot_word(a,b)
XScr_type *a, b;
X/*
X Weak attempt to make line styles. The real problem is the aspect
X ratio. This routine is called only when a bit is to be turned on in
X a horizontal word. A better line style routine would know something
X about the slope of the line around the current point (in order to
X change weighting).
X
X This yields 3 working linetypes plus a usable axis line type.
X*/
X{
X/* Various line types */
X switch (uPC_cur_linetype) {
X case -1:
X /* Distinguish between horizontal and vertical axis. */
X if (uPC_sx > uPC_XMAX/8 && uPC_sx < 7*uPC_XMAX/8) {
X /* Fuzzy tolerance because we don't know exactly where the y axis is */
X if (++uPC_raster_count % 2 == 0) *(a) |= b;
X }
X else {
X /* Due to aspect ratio, take every other y pixel and every third x. */
X *(a) |= (b & 0x9999);
X }
X break;
X case 1:
X case 5:
X /* Make a | |----| |----| type of line. */
X if ((1<<uPC_raster_count) & 0xF0F0) *(a) |= b;
X if (++uPC_raster_count > 15) uPC_raster_count = 0;
X break;
X case 2:
X case 6:
X /* Make a |----|----|----|--- | | type of line. */
X if ((1<<uPC_raster_count) & 0x0EFFF) *(a) |= b;
X if (++uPC_raster_count > 19) uPC_raster_count = 0;
X break;
X case 3:
X case 7:
X /* Make a | - | - | - | - | type of line. */
X if ((1<<uPC_raster_count) & 0x4444) *(a) |= b;
X if (++uPC_raster_count > 15) uPC_raster_count = 0;
X break;
X case 4:
X case 8:
X default:
X *(a) |= b;
X break;
X }
X}
X
XuPC_vector(x,y)
Xunsigned int x,y;
X{
X/* This routine calls line with x,y */
X int x1 = uPC_sx, y1=uPC_sy, x2 = x, y2 = y;
X register int c, e, dx, dy, width;
X register Scr_type mask, *a;
X static Scr_type lookup[] = {
X 0x0001, 0x0002, 0x0004, 0x0008,
X 0x0010, 0x0020, 0x0040, 0x0080,
X 0x0100, 0x0200, 0x0400, 0x0800,
X 0x1000, 0x2000, 0x4000, 0x8000,
X };
X
X/* Record new sx, sy for next call to the vector routine. */
X uPC_sx = x2;
X uPC_sy = y2;
X
X a = &uPC_display[(uPC_YSIZE - 1) - y1][x1 >> 4];
X mask = lookup[x1 & 0x0f];
X width = uPC_width;
X
X if ((dx = x2 - x1) > 0) {
X if ((dy = y2 - y1) > 0) {
X if (dx > dy) { /* dx > 0, dy > 0, dx > dy */
X dy <<= 1;
X e = dy - dx;
X c = dx + 2;
X dx <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X (Scr_kluge *)a -= width;
X e -= dx;
X }
X if (mask & uPC_HIGH_BIT) {
X mask = 1;
X a++;
X } else
X mask <<= 1;
X e += dy;
X }
X } else { /* dx > 0, dy > 0, dx <= dy */
X dx <<= 1;
X e = dx - dy;
X c = dy + 2;
X dy <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X if (mask & uPC_HIGH_BIT) {
X mask = 1;
X a++;
X } else
X mask <<= 1;
X e -= dy;
X }
X (Scr_kluge *)a -= width;
X e += dx;
X }
X }
X } else {
X dy = -dy;
X if (dx > dy) { /* dx > 0, dy <= 0, dx > dy */
X dy <<= 1;
X e = dy - dx;
X c = dx + 2;
X dx <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X (Scr_kluge *)a += width;
X e -= dx;
X }
X if (mask & uPC_HIGH_BIT) {
X mask = 1;
X a++;
X } else
X mask <<= 1;
X e += dy;
X }
X } else { /* dx > 0, dy <= 0, dx <= dy */
X dx <<= 1;
X e = dx - dy;
X c = dy + 2;
X dy <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X if (mask & uPC_HIGH_BIT) {
X mask = 1;
X a++;
X } else
X mask <<= 1;
X e -= dy;
X }
X (Scr_kluge *)a += width;
X e += dx;
X }
X }
X }
X } else {
X dx = -dx;
X if ((dy = y2 - y1) > 0) {
X if (dx > dy) { /* dx <= 0, dy > 0, dx > dy */
X dy <<= 1;
X e = dy - dx;
X c = dx + 2;
X dx <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X (Scr_kluge *)a -= width;
X e -= dx;
X }
X if (mask & 1) {
X mask = uPC_HIGH_BIT;
X a--;
X } else
X mask >>= 1;
X e += dy;
X }
X } else { /* dx <= 0, dy > 0, dx <= dy */
X dx <<= 1;
X e = dx - dy;
X c = dy + 2;
X dy <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X if (mask & 1) {
X mask = uPC_HIGH_BIT;
X a--;
X } else
X mask >>= 1;
X e -= dy;
X }
X (Scr_kluge *)a -= width;
X e += dx;
X }
X }
X } else {
X dy = -dy;
X if (dx > dy) { /* dx <= 0, dy <= 0, dx > dy */
X dy <<= 1;
X e = dy - dx;
X c = dx + 2;
X dx <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X (Scr_kluge *)a += width;
X e -= dx;
X }
X if (mask & 1) {
X mask = uPC_HIGH_BIT;
X a--;
X } else
X mask >>= 1;
X e += dy;
X }
X } else { /* dx <= 0, dy <= 0, dx <= dy */
X dx <<= 1;
X e = dx - dy;
X c = dy + 2;
X dy <<= 1;
X
X while (--c) {
X uPC_PLOT(a, mask);
X if (e >= 0) {
X if (mask & 1) {
X mask = uPC_HIGH_BIT;
X a--;
X } else
X mask >>= 1;
X e -= dy;
X }
X (Scr_kluge *)a += width;
X e += dx;
X }
X }
X }
X }
X}
X
X
XuPC_lrput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X int col = 80-strlen(str), num, i;
X struct utdata ut;
X char *txt=ut.ut_text;
X
X/* Fill in the pad. */
X for (i = 0; i < col; i++)
X txt[i] = ' ';
X/* Then stick in the text. */
X txt[i] = '\0';
X strcat (txt, str);
X
X if (row > 2)
X puts (txt);
X else {
X /* This will fit on the 2 bottom "non-graphic" lines. */
X switch (row) {
X case 0: ut.ut_num = WTXTSLK1; break;
X case 1: ut.ut_num = WTXTSLK2; break;
X }
X ioctl (0, WIOCSETTEXT, &ut);
X }
X wgoto (1, 24, 0);
X}
X
XuPC_ulput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X/* This routine puts the text in the upper left corner. */
X
X/* Just use the ANSI escape sequence CUP (iswind said that was ok!) */
X printf ("\033[%d;%dH%s\033[25;1H", row+2, 2, str); /* +1 +2 ? */
X fflush (stdout);
X}
X
X
XuPC_reset()
X{
X/* Reset window to normal size. */
X uPC_fixwind (0);
X}
X
X
X
XuPC_fixwind(signo)
Xint signo;
X{
X static struct uwdata wreset = { 0, 12, 720, 288, 0x1};
X struct utdata ut;
X
X/* Reset the window to the right size. */
X ioctl(0, WIOCSETD, &wreset); /* 0, not wncur here! */
X
X/* Clear the lines affected by an _lrput_text. */
X ut.ut_text[0] = '\0';
X ut.ut_num = WTXTSLK1;
X ioctl(0, WIOCSETTEXT, &ut);
X ut.ut_num = WTXTSLK2;
X ioctl(0, WIOCSETTEXT, &ut);
X/* Scroll the screen once. (avoids typing over the same line) */
X fprintf (stderr, "\n");
X
X if (signo) {
X if (signo == SIGILL || signo == SIGTRAP || signo == SIGPWR)
X signal (signo, SIG_DFL);
X kill (0,signo); /* Redo the signal (as if we never trapped it). */
X }
X}
END_OF_FILE
if test 12181 -ne `wc -c <'unixpc.trm'`; then
echo shar: \"'unixpc.trm'\" unpacked with wrong size!
fi
# end of 'unixpc.trm'
fi
if test -f 'unixplot.trm' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'unixplot.trm'\"
else
echo shar: Extracting \"'unixplot.trm'\" \(998 characters\)
sed "s/^X//" >'unixplot.trm' <<'END_OF_FILE'
X#define UP_XMAX 4096
X#define UP_YMAX 4096
X
X#define UP_XLAST (UP_XMAX - 1)
X#define UP_YLAST (UP_YMAX - 1)
X
X#define UP_VCHAR (UP_YMAX/30)
X#define UP_HCHAR (UP_XMAX/72) /* just a guess--no way to know this! */
X#define UP_VTIC (UP_YMAX/80)
X#define UP_HTIC (UP_XMAX/80)
X
XUP_init()
X{
X openpl();
X space(0, 0, UP_XMAX, UP_YMAX);
X}
X
X
XUP_graphics()
X{
X erase();
X}
X
X
XUP_text()
X{
X}
X
X
XUP_linetype(linetype)
Xint linetype;
X{
Xstatic char *lt[2+5] = {"solid", "longdashed", "solid", "dotted","shortdashed",
X "dotdashed", "longdashed"};
X
X if (linetype >= 5)
X linetype %= 5;
X linemod(lt[linetype+2]);
X}
X
X
XUP_move(x,y)
Xunsigned int x,y;
X{
X move(x,y);
X}
X
X
XUP_vector(x,y)
Xunsigned int x,y;
X{
X cont(x,y);
X}
X
X
XUP_lrput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X move(UP_XMAX - UP_HTIC - UP_HCHAR*(strlen(str)+1),
X UP_VTIC + UP_VCHAR*(row+1));
X label(str);
X}
X
X
XUP_ulput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X UP_move(UP_HTIC, UP_YMAX - UP_VTIC - UP_VCHAR*(row+1));
X label(str);
X}
X
XUP_reset()
X{
X closepl();
X}
X
X
END_OF_FILE
if test 998 -ne `wc -c <'unixplot.trm'`; then
echo shar: \"'unixplot.trm'\" unpacked with wrong size!
fi
# end of 'unixplot.trm'
fi
if test -f 'util.c' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'util.c'\"
else
echo shar: Extracting \"'util.c'\" \(8430 characters\)
sed "s/^X//" >'util.c' <<'END_OF_FILE'
X/*
X *
X * G N U P L O T -- util.c
X *
X * Copyright (C) 1986, 1987 Thomas Williams, Colin Kelley
X *
X * You may use this code as you wish if credit is given and this message
X * is retained.
X *
X * Please e-mail any useful additions to vu-vlsi!plot so they may be
X * included in later releases.
X *
X * This file should be edited with 4-column tabs! (:set ts=4 sw=4 in vi)
X */
X
X#include <ctype.h>
X#include <setjmp.h>
X#include <stdio.h>
X#include <errno.h>
X#include "plot.h"
X
Xextern BOOLEAN screen_ok;
X /* TRUE if command just typed; becomes FALSE whenever we
X send some other output to screen. If FALSE, the command line
X will be echoed to the screen before the ^ error message. */
X
Xchar *malloc();
X
X#ifndef vms
Xextern int errno, sys_nerr;
Xextern char *sys_errlist[];
X#endif /* vms */
X
Xextern char input_line[];
Xextern struct lexical_unit token[];
Xextern jmp_buf env; /* from plot.c */
X
X
X/*
X * equals() compares string value of token number t_num with str[], and
X * returns TRUE if they are identical.
X */
Xequals(t_num, str)
Xint t_num;
Xchar *str;
X{
Xregister int i;
X
X if (!token[t_num].is_token)
X return(FALSE); /* must be a value--can't be equal */
X for (i = 0; i < token[t_num].length; i++) {
X if (input_line[token[t_num].start_index+i] != str[i])
X return(FALSE);
X }
X /* now return TRUE if at end of str[], FALSE if not */
X return(str[i] == '\0');
X}
X
X
X
X/*
X * almost_equals() compares string value of token number t_num with str[], and
X * returns TRUE if they are identical up to the first $ in str[].
X */
Xalmost_equals(t_num, str)
Xint t_num;
Xchar *str;
X{
Xregister int i;
Xregister int after = 0;
Xregister start = token[t_num].start_index;
Xregister length = token[t_num].length;
X
X if (!token[t_num].is_token)
X return(FALSE); /* must be a value--can't be equal */
X for (i = 0; i < length + after; i++) {
X if (str[i] != input_line[start + i]) {
X if (str[i] != '$')
X return(FALSE);
X else {
X after = 1;
X start--; /* back up token ptr */
X }
X }
X }
X
X /* i now beyond end of token string */
X
X return(after || str[i] == '$' || str[i] == '\0');
X}
X
X
X
Xisstring(t_num)
Xint t_num;
X{
X
X return(token[t_num].is_token &&
X (input_line[token[t_num].start_index] == '\'' ||
X input_line[token[t_num].start_index] == '\"'));
X}
X
X
Xisnumber(t_num)
Xint t_num;
X{
X return(!token[t_num].is_token);
X}
X
X
Xisletter(t_num)
Xint t_num;
X{
X return(token[t_num].is_token &&
X (isalpha(input_line[token[t_num].start_index])));
X}
X
X
X/*
X * is_definition() returns TRUE if the next tokens are of the form
X * identifier =
X * -or-
X * identifier ( identifer ) =
X */
Xis_definition(t_num)
Xint t_num;
X{
X return (isletter(t_num) &&
X (equals(t_num+1,"=") || /* variable */
X (equals(t_num+1,"(") && /* function */
X isletter(t_num+2) &&
X equals(t_num+3,")") &&
X equals(t_num+4,"=") )
X ));
X}
X
X
X
X/*
X * copy_str() copies the string in token number t_num into str, appending
X * a null. No more than MAX_ID_LEN chars are copied.
X */
Xcopy_str(str, t_num)
Xchar str[];
Xint t_num;
X{
Xregister int i = 0;
Xregister int start = token[t_num].start_index;
Xregister int count;
X
X if ((count = token[t_num].length) > MAX_ID_LEN)
X count = MAX_ID_LEN;
X do {
X str[i++] = input_line[start++];
X } while (i != count);
X str[i] = '\0';
X}
X
X
X/*
X * quote_str() does the same thing as copy_str, except it ignores the
X * quotes at both ends. This seems redundant, but is done for
X * efficency.
X */
Xquote_str(str, t_num)
Xchar str[];
Xint t_num;
X{
Xregister int i = 0;
Xregister int start = token[t_num].start_index + 1;
Xregister int count;
X
X if ((count = token[t_num].length - 2) > MAX_ID_LEN)
X count = MAX_ID_LEN;
X do {
X str[i++] = input_line[start++];
X } while (i != count);
X str[i] = '\0';
X}
X
X
X/*
X * capture() copies into str[] the part of input_line[] which lies between
X * the begining of token[start] and end of token[end].
X */
Xcapture(str,start,end)
Xchar str[];
Xint start,end;
X{
Xregister int i,e;
X
X e = token[end].start_index + token[end].length;
X for (i = token[start].start_index; i < e && input_line[i] != '\0'; i++)
X *str++ = input_line[i];
X *str = '\0';
X}
X
X
X/*
X * m_capture() is similar to capture(), but it mallocs storage for the
X * string.
X */
Xm_capture(str,start,end)
Xchar **str;
Xint start,end;
X{
Xregister int i,e;
Xregister char *s;
X
X if (*str) /* previous pointer to malloc'd memory there */
X free(*str);
X e = token[end].start_index + token[end].length;
X if (*str = malloc((unsigned int)(e - token[start].start_index + 1))) {
X s = *str;
X for (i = token[start].start_index; i < e && input_line[i] != '\0'; i++)
X *s++ = input_line[i];
X *s = '\0';
X }
X}
X
X
Xconvert(val_ptr, t_num)
Xstruct value *val_ptr;
Xint t_num;
X{
X *val_ptr = token[t_num].l_val;
X}
X
X
X
Xdisp_value(fp,val)
XFILE *fp;
Xstruct value *val;
X{
X switch(val->type) {
X case INT:
X fprintf(fp,"%d",val->v.int_val);
X break;
X case CMPLX:
X if (val->v.cmplx_val.imag != 0.0 )
X fprintf(fp,"{%g, %g}",
X val->v.cmplx_val.real,val->v.cmplx_val.imag);
X else
X fprintf(fp,"%g", val->v.cmplx_val.real);
X break;
X default:
X int_error("unknown type in disp_value()",NO_CARET);
X }
X}
X
X
Xdouble
Xreal(val) /* returns the real part of val */
Xstruct value *val;
X{
X switch(val->type) {
X case INT:
X return((double) val->v.int_val);
X break;
X case CMPLX:
X return(val->v.cmplx_val.real);
X }
X int_error("unknown type in real()",NO_CARET);
X /* NOTREACHED */
X}
X
X
Xdouble
Ximag(val) /* returns the imag part of val */
Xstruct value *val;
X{
X switch(val->type) {
X case INT:
X return(0.0);
X break;
X case CMPLX:
X return(val->v.cmplx_val.imag);
X }
X int_error("unknown type in real()",NO_CARET);
X /* NOTREACHED */
X}
X
X
X
Xdouble
Xmagnitude(val) /* returns the magnitude of val */
Xstruct value *val;
X{
X double sqrt();
X
X switch(val->type) {
X case INT:
X return((double) abs(val->v.int_val));
X break;
X case CMPLX:
X return(sqrt(val->v.cmplx_val.real*
X val->v.cmplx_val.real +
X val->v.cmplx_val.imag*
X val->v.cmplx_val.imag));
X }
X int_error("unknown type in magnitude()",NO_CARET);
X /* NOTREACHED */
X}
X
X
X
Xdouble
Xangle(val) /* returns the angle of val */
Xstruct value *val;
X{
X double atan2();
X
X switch(val->type) {
X case INT:
X return((val->v.int_val > 0) ? 0.0 : Pi);
X break;
X case CMPLX:
X if (val->v.cmplx_val.imag == 0.0) {
X if (val->v.cmplx_val.real >= 0.0)
X return(0.0);
X else
X return(Pi);
X }
X return(atan2(val->v.cmplx_val.imag,
X val->v.cmplx_val.real));
X }
X int_error("unknown type in angle()",NO_CARET);
X /* NOTREACHED */
X}
X
X
Xstruct value *
Xcomplex(a,realpart,imagpart)
Xstruct value *a;
Xdouble realpart, imagpart;
X{
X a->type = CMPLX;
X a->v.cmplx_val.real = realpart;
X a->v.cmplx_val.imag = imagpart;
X return(a);
X}
X
X
Xstruct value *
Xinteger(a,i)
Xstruct value *a;
Xint i;
X{
X a->type = INT;
X a->v.int_val = i;
X return(a);
X}
X
X
X
Xos_error(str,t_num)
Xchar str[];
Xint t_num;
X{
X#ifdef vms
Xstatic status[2] = {1, 0}; /* 1 is count of error msgs */
X#endif
X
Xregister int i;
X
X /* reprint line if screen has been written to */
X
X if (t_num != NO_CARET) { /* put caret under error */
X if (!screen_ok)
X fprintf(stderr,"\n%s%s\n", PROMPT, input_line);
X
X for (i = 0; i < sizeof(PROMPT) - 1; i++)
X (void) putc(' ',stderr);
X for (i = 0; i < token[t_num].start_index; i++) {
X (void) putc((input_line[i] == '\t') ? '\t' : ' ',stderr);
X }
X (void) putc('^',stderr);
X (void) putc('\n',stderr);
X }
X
X for (i = 0; i < sizeof(PROMPT) - 1; i++)
X (void) putc(' ',stderr);
X fprintf(stderr,"%s\n",str);
X
X for (i = 0; i < sizeof(PROMPT) - 1; i++)
X (void) putc(' ',stderr);
X#ifdef vms
X status[1] = vaxc$errno;
X sys$putmsg(status);
X (void) putc('\n',stderr);
X#else
X if (errno >= sys_nerr)
X fprintf(stderr, "unknown errno %d\n\n", errno);
X else
X fprintf(stderr,"(%s)\n\n",sys_errlist[errno]);
X#endif
X
X longjmp(env, TRUE); /* bail out to command line */
X}
X
X
Xint_error(str,t_num)
Xchar str[];
Xint t_num;
X{
Xregister int i;
X
X /* reprint line if screen has been written to */
X
X if (t_num != NO_CARET) { /* put caret under error */
X if (!screen_ok)
X fprintf(stderr,"\n%s%s\n", PROMPT, input_line);
X
X for (i = 0; i < sizeof(PROMPT) - 1; i++)
X (void) putc(' ',stderr);
X for (i = 0; i < token[t_num].start_index; i++) {
X (void) putc((input_line[i] == '\t') ? '\t' : ' ',stderr);
X }
X (void) putc('^',stderr);
X (void) putc('\n',stderr);
X }
X
X for (i = 0; i < sizeof(PROMPT) - 1; i++)
X (void) putc(' ',stderr);
X fprintf(stderr,"%s\n\n",str);
X
X longjmp(env, TRUE); /* bail out to command line */
X}
END_OF_FILE
if test 8430 -ne `wc -c <'util.c'`; then
echo shar: \"'util.c'\" unpacked with wrong size!
fi
# end of 'util.c'
fi
if test -f 'v384.trm' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'v384.trm'\"
else
echo shar: Extracting \"'v384.trm'\" \(1966 characters\)
sed "s/^X//" >'v384.trm' <<'END_OF_FILE'
X/*
X * thanks to roland@moncskermit.OZ (Roland Yap) for this driver
X *
X * Vectrix 384 driver - works with tandy color printer as well
X * in reverse printing 8 color mode.
X * This doesn't work on Vectrix 128 because it redefines the
X * color table. It can be hacked to work on the 128 by changing
X * the colours but then it will probably not print best. The color
X * table is purposely designed so that it will print well
X *
X */
X
X#define V384_XMAX 630
X#define V384_YMAX 480
X
X#define V384_XLAST (V384_XMAX - 1)
X#define V384_YLAST (V384_YMAX - 1)
X
X#define V384_VCHAR 12
X#define V384_HCHAR 7
X#define V384_VTIC 8
X#define V384_HTIC 7
X
X
XV384_init()
X{
X fprintf(outfile,"%c%c G0 \n",27,18);
X fprintf(outfile,"Q 0 8\n");
X fprintf(outfile,"0 0 0\n");
X fprintf(outfile,"255 0 0\n");
X fprintf(outfile,"0 255 0\n");
X fprintf(outfile,"0 0 255\n");
X fprintf(outfile,"0 255 255\n");
X fprintf(outfile,"255 0 255\n");
X fprintf(outfile,"255 255 0\n");
X fprintf(outfile,"255 255 255\n");
X}
X
X
XV384_graphics()
X{
X fprintf(outfile,"%c%c E0 RE N 65535\n",27,18);
X}
X
X
XV384_text()
X{
X fprintf(outfile,"%c%c\n",27,17);
X}
X
X
XV384_linetype(linetype)
Xint linetype;
X{
Xstatic int color[]= {
X 1 /* red */,
X 2 /* green */,
X 3 /* blue */,
X 4 /* cyan */,
X 5 /* magenta */,
X 6 /* yellow */, /* not a good color so not in use at the moment */
X 7 /* white */
X };
X
X if (linetype < 0)
X linetype=6;
X else
X linetype %= 5;
X fprintf(outfile,"C %d\n",color[linetype]);
X}
X
X
XV384_move(x,y)
Xunsigned int x,y;
X{
X fprintf(outfile,"M %d %d\n",x+20,y);
X}
X
X
XV384_vector(x,y)
Xunsigned int x,y;
X{
X fprintf(outfile,"L %d %d\n",x+20,y);
X}
X
X
XV384_lrput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X V384_move(V384_XMAX - V384_HTIC - V384_HCHAR*(strlen(str)+1),
X V384_VTIC + V384_VCHAR*(row+1));
X fprintf(outfile,"$%s\n",str);
X}
X
X
XV384_ulput_text(row,str)
Xunsigned int row;
Xchar str[];
X{
X V384_move(V384_HTIC, V384_YMAX - V384_VTIC - V384_VCHAR*(row+1));
X fprintf(outfile,"$%s\n",str);
X}
X
X
XV384_reset()
X{
X}
X
X
END_OF_FILE
if test 1966 -ne `wc -c <'v384.trm'`; then
echo shar: \"'v384.trm'\" unpacked with wrong size!
fi
# end of 'v384.trm'
fi
if test -f 'version.c' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'version.c'\"
else
echo shar: Extracting \"'version.c'\" \(1467 characters\)
sed "s/^X//" >'version.c' <<'END_OF_FILE'
X/*
X * Modified version of 1.1.0 gnuplot by Thomas Williams and Colin Kelley.
X * "You may use this code as you wish if credit is given and this message
X * is retained."
X *
X * Our "use" of this code has been to add a terminal driver (att 3b1),
X * improve the IBM-PC drivers using TURBO-C routines, throw in a
X * different help system (the one we got didn't seem to work) and add
X * the commands SET POLAR, SET OFFSETS, and PAUSE.
X *
X * Files that were changed from the original 1.1.0 version:
X * command.c, graphics.c, misc.c, plot.c, term.c and version.c.
X *
X * The annoying problem with unixplot files not being redirected by
X * the set output command was fixed and an ``init()'' routine was
X * added to term.c to allow an implementation to detect the terminal
X * type. (Currently only used by TURBO-C and VMS.) The file term.c
X * was further changed by breaking it into a number of .TRM files
X * (Makefile was changed accordingly).
X *
X * A bug in do_plot() was fixed as well as a VMS bug that caused
X * SET OUTPUT to fail. A final departure from the original 1.1.0
X * version was the addition of Jyrki Yli-Nokari's HP laser jet
X * drivers to term.c.
X *
X * John Campbell CAMPBELL@NAUVAX.bitnet (3b1, polar, offsets, pause)
X * Bill Wilson WILSON@NAUVAX.bitnet (TURBO-C IBM-PC drivers)
X * Steve Wampler ...!arizona!naucse!sbw (help system acquisition)
X */
Xchar version[] = "1.1.0A (Polar)";
Xchar date[] = "Thu May 18 21:57:24 MST 1989";
END_OF_FILE
if test 1467 -ne `wc -c <'version.c'`; then
echo shar: \"'version.c'\" unpacked with wrong size!
fi
# end of 'version.c'
fi
echo shar: End of archive 5 \(of 7\).
cp /dev/null ark5isdone
MISSING=""
for I in 1 2 3 4 5 6 7 ; do
if test ! -f ark${I}isdone ; then
MISSING="${MISSING} ${I}"
fi
done
if test "${MISSING}" = "" ; then
echo You have unpacked all 7 archives.
rm -f ark[1-9]isdone
else
echo You still need to unpack the following archives:
echo " " ${MISSING}
fi
## End of shell archive.
exit 0