wht@gatech.edu@n4hgf.Mt-Park.GA.US.UUCP (Warren Tucker) (07/03/90)
Posting-number: Volume 13, Issue 85
Submitted-by: wht@gatech.edu@n4hgf.Mt-Park.GA.US.UUCP (Warren Tucker)
Archive-name: ecu2.80/patch04
Changes since ecu 2.80 patchlevel 3
1. A problem with passing arguments to an initial procedure was
fixed. Getopt() is now used, which requires that all switch
command arguments must precede the non-switch arguments.
This was not true in previous revisions of ecu.
2. A new (non-standard) escape sequence has been added to the
expresp procedure command. \m### causes a ### millisecond delay.
Note this adds an ambiguity to the syntax of the send string:
you may not follow an \m delay with a literal digit to send.
For example, suppose you wish to delay 300 missileconds then
send "4A". \m3004A will delay for 3004 (approximately) milliseconds,
then send an "A". You must, instead, use \m300\034A to achieve
the desired result.
3. The method of choosing a shared memory segment key changed.
Previously, ftok() was used. Now, the algorithm is
0xEC000000L | getpid();
4. The -D switch has been added to cause ecu to terminate
unconditionally upon completion of an initial procedure (-p).
5. Other minor unreported bugs were fixed.
#!/bin/sh
# This is ecu2.80/patch03, a shell archive (shar 3.31)
# made 07/02/1990 00:14 UTC by wht@n4hgf.Mt-Park.GA.US
# Source directory /u1/src/ecu
#
# existing files WILL be overwritten
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 9366 -rw-r--r-- ecu.c
# 2587 -rw-r--r-- help/lint_args.h
# 28750 -rw-r--r-- ECU280.P04
# 470 -rwxr-xr-x APPLY.P04
#
if touch 2>&1 | fgrep 'mmdd' > /dev/null
then TOUCH=touch
else TOUCH=true
fi
# ============= ecu.c ==============
echo "x - extracting ecu.c (Text)"
sed 's/^X//' << 'SHAR_EOF' > ecu.c &&
X/* CHK=0x130C */
X/*+-----------------------------------------------------------------------
X ecu.c
X wht%n4hgf@gatech.edu
X
X Defined functions:
X main(argc,argv,envp)
X xmtr()
X
X------------------------------------------------------------------------*/
X/*+:EDITS:*/
X/*:07-01-1990-19:06-wht@n4hgf-add -D switch */
X/*:06-09-1990-02:32-wht@n4hgf-overhaul argv processing */
X/*:05-10-1990-16:44-wht@n4hgf-move patchlevel to hello_str from ecuicmd.c */
X/*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X/*:04-19-1990-03:07-wht@n4hgf-GCC run found unused vars -- rm them */
X/*:03-27-1990-15:18-wht@n4hgf-overhaul for/wait/SIGCLD handling */
X/*:03-26-1990-15:11-wht@n4hgf-better diag when line choice fails with HDB */
X/*:03-25-1990-14:11-wht@n4hgf------ x2.70 ------- */
X/*:03-16-1990-04:30-wht@n4hgf-make ftime call for starting_timeb */
X/*:02-20-1990-03:50-wht-per doc, do not assume timeval unmodified by select */
X/*:10-14-1989-21:10-wht-allow user to change ecu color choices */
X/*:07-03-1989-22:57-wht------ x2.00 ----- */
X/*:06-24-1989-16:52-wht-flush edits --- ecu 1.95 */
X
X#define DECLARE_LINEVARS_PUBLIC
X#include "ecu.h"
X#include "esd.h"
X#include "proc.h"
X#include "ecukey.h"
X#include "ecuxkey.h"
X#include "ecuhangup.h"
X#include "patchlevel.h"
X
Xchar *getenv();
X
Xextern char *makedate; /* temporary make date */
Xextern char *numeric_revision; /* ecunumrev.c */
Xextern char *revision_modifier; /* ecunumrev.c */
Xextern ESD *icmd_prompt;
Xextern char kbdeof; /* current input EOF */
Xextern char kbdeol2; /* current secondary input EOL */
Xextern char kbdeol; /* current input EOL */
Xextern char kbderase; /* current input ERASE */
Xextern char kbdintr; /* current input INTR */
Xextern char kbdkill; /* current input KILL */
Xextern char kbdquit; /* current input QUIT */
Xextern ulong colors_current;
Xextern int there_is_hdb_on_this_machine;
Xextern char lopen_err_str[];
X
Xchar curr_dir[258]; /* current working directory of process */
Xchar hello_str[80]; /* msg printed upon BOJ */
Xchar errmsg[128];
Xchar modem_ctl_fname[128];
Xchar initial_procedure[128] = "";
Xint init_proc_argc = 0;
Xchar *init_proc_argv[MAX_PARGV];
Xint quiet = 0; /* don't shut up is default */
Xint rcvr_pid = -1; /* pid for rcvr process (-1 == no proc active) */
X /* ... -2 == special flag for modem control/timed-read procedures */
Xint xmtr_pid = 0;
Xint quit_on_init_proc_fail = 0;
Xint quit_on_init_proc_done = 0;
Xstruct timeb starting_timeb;
X
X/*-----------------------*/
Xint nice_value = 3; /* go for hi priority */
Xushort geteuid();
Xushort getuid();
Xushort euid;
Xushort uid;
X/*-----------------------*/
X
X/*+-----------------------------------------------------------------------
X xmtr() -- copy stdin to comm line
X
X THE INITIAL PROCESS EXECUTES THIS PROCESS UNTIL PROGRAM TERMINATION
X
X TTY input lines beginning with % have special significance
X (see ecuicmd.c)
X------------------------------------------------------------------------*/
Xint
Xxmtr()
X{
Xuchar xmtr_char;
Xuchar nlchar = NL;
Xvoid xmtr_SIGINT_handler();
X
X ttymode(1);
X xmtr_signals();
X while(1)
X {
X/* bug somewhere ... may be SIGINT too rapidly causing SIG_IGN ????? */
X signal(SIGINT,xmtr_SIGINT_handler); /* so make sure */
X xmtr_char = ttygetc(1);
X
X if(xmtr_char & 0x80)
X {
X kbd_escape(xmtr_char);
X continue;
X }
X
X lputc(xmtr_char);
X if(shm->Lfull_duplex == 0) /* echo character if asked */
X write(TTYERR,&xmtr_char,1);
X
X if(xmtr_char == CR)
X {
X if(shm->Ladd_nl_outgoing)
X lputc('\n');
X if(shm->Lfull_duplex == 0)
X write(TTYERR,&nlchar,1);
X }
X } /* end of while we can read a character */
X return(HANGUP_XMTR_LOGIC_ERROR); /* should not have gotten here */
X
X} /* end of xmtr */
X
X/*+-------------------------------------------------------------------------
X main(argc,argv,envp)
X
X main() program forks to create rcvr process; then main()
X becomes the xmtr process
X------------------------------------------------------------------------*/
Xmain(argc,argv,envp)
Xint argc;
Xchar **argv;
Xchar **envp;
X{
Xint swchar;
Xint itmp;
Xulong colors_save;
Xchar *get_ttyname();
Xextern char *optarg;
Xextern int optind;
X
X setbuf(stderr,NULL);
X ttyinit(); /* init console tty mode handler */
X clear_screen();
X xmtr_pid = getpid();
X ftime(&starting_timeb); /* get startup time */
X
X/* get this off quick, cause we'll be busy for a little while on 286 */
X sprintf(hello_str,"ecu %s.%02d%s by wht@n4hgf (pid %d)",
X numeric_revision,PATCHLEVEL,revision_modifier,xmtr_pid);
X ff(se,"%s\n",hello_str);
X
X/* if we are root (as we should be on 286 versions), nice to very bad
X and set uid to real uid */
X
X uid = getuid();
X euid = geteuid();
X if((euid == 0) || (uid == 0)) /* if root running or prog text ... */
X { /* ... sets to root, then grab gusto */
X int old_nice = nice(0) + 20;
X nice(-old_nice + nice_value);
X if(uid != euid) /* but if user not really root ... */
X {
X if(setuid(uid)) /* ... take away the privilege */
X {
X ff(se,"\r\n");
X perror("setuid");
X ff(se,"\r\n");
X exit(-1);
X }
X }
X }
X
X shm_init(); /* open shared segment */
X
X keyset_init(); /* intialize keyset */
X
X make_ecu_subdir(); /* needs to be very early before lots of init */
X
X xmtr_signals(); /* catch xmtr signals */
X
X get_curr_dir(curr_dir,sizeof(curr_dir));
X cd_array_init(); /* read %cd directory list */
X
X hdb_init();
X
X var_init(); /* initialize procedure variables */
X poutput_init(); /* initialize procedure output */
X
X icmd_prompt = make_esd(64);
X set_default_escape_prompt();
X ttymode(1); /* put user console in `raw' mode */
X
X/* init line variables */
X shm->Lline[0] = 0; /* no line chosen yet */
X shm->Liofd = -1; /* no line open now */
X shm->Lbaud = DEFAULT_BAUD_RATE; /* see ecu.h */
X shm->Lparity = 0; /* no parity selected ... default NONE */
X shm->Ltelno[0] = 0; /* no telephone number for remote yet */
X shm->Llogical[0] = 0; /* no logical name for remote yet */
X shm->Lrname[0] = 0; /* no logical name for remote yet */
X shm->Ldescr[0] = 0; /* no description for remote yet */
X shm->Lmodem_off_hook = 0; /* assume modem on hook */
X shm->Ladd_nl_incoming = 0; /* dont add nl to incoming cr */
X shm->Ladd_nl_outgoing = 0; /* dont add nl to outgoing cr */
X shm->Lfull_duplex = 1; /* assume full duplex */
X shm->Lmodem_already_init = 0; /* modem has not been initialized */
X shm->Lxonxoff = IXON | IXOFF; /* default to xon/xoff protocol */
X shm->xmtr_pid = getpid();
X shm->xmtr_ppid = getppid();
X shm->xmtr_pgrp = getpgrp(0);
X strcpy(shm->tty_name,get_ttyname());
X shm->shm_revision = SHM_REV;
X
X while((swchar = getopt(argc,argv,"c:p:l:b:hfdDteo")) != -1)
X {
X switch(swchar)
X {
X case 'b':
X if(valid_baud_rate(shm->Lbaud = atoi(optarg)) < 0)
X {
X ff(se,"invalid baud rate %u\r\n",shm->Lbaud);
X usage();
X }
X break;
X case 'c':
X strcpy(modem_ctl_fname,optarg);
X break;
X case 'l':
X shm->Lline[0] = 0;
X if(strncmp(optarg,"/dev/tty",8))
X strcpy(shm->Lline,"/dev/tty");
X strcat(shm->Lline,optarg);
X break;
X case 'p':
X strcpy(initial_procedure,optarg);
X break;
X case 'h': shm->Lfull_duplex = 0; break;
X case 'f': shm->Lfull_duplex = 1; break;
X case 'd': quit_on_init_proc_fail = 1; break;
X case 'D': quit_on_init_proc_done = 1; break;
X case 't': shm->Ladd_nl_incoming = 1;
X shm->Ladd_nl_outgoing = 1; break;
X case 'e': shm->Lparity = 'e'; break;
X case 'o': shm->Lparity = 'o'; break;
X case '?': usage();
X }
X }
X
X/* check out line */
X if(!shm->Lline[0])
X {
X if(!there_is_hdb_on_this_machine)
X strcpy(shm->Lline,"/dev/tty1a");
X else
X {
X choose_line(shm->Lbaud);
X if(!shm->Lline[0])
X {
X ff(se,"\r\n");
X ff(se,"\r\n");
X stand_out();
X ff(se,"[no available Devices line at %u baud]",shm->Lbaud);
X stand_end();
X ff(se,"\r\n");
X strcpy(shm->Lline,"/dev/tty1a");
X }
X }
X }
X
X if(initial_procedure[0])
X {
X init_proc_argv[0] = initial_procedure;
X init_proc_argc = 1;
X for(itmp = optind; itmp < argc; itmp++)
X {
X if(*argv[itmp] != '-')
X {
X if(init_proc_argc == MAX_PARGV)
X {
X ff(se,"too many arguments to initial procedure\r\n");
X hangup(HANGUP_USAGE);
X }
X init_proc_argv[init_proc_argc++] = argv[itmp];
X }
X }
X
X /* wierd bug fixed by this ... I know not why */
X windows_start();
X windows_end2();
X fflush(so);
X
X ttymode(2);
X if(do_proc(init_proc_argc,init_proc_argv))
X {
X if(quit_on_init_proc_fail || quit_on_init_proc_done)
X hangup(HANGUP_INIT_PROC_ERROR);
X }
X proc_file_reset();
X colors_save = colors_current;
X setcolor(colors_notify);
X fputs("[procedure finished]",se);
X setcolor(colors_save);
X ff(se,"\r\n");
X if(quit_on_init_proc_done)
X hangup(0);
X if(shm->Liofd < 0)
X {
X ff(se,"\r\n");
X ff(se,"\r\n");
X stand_out();
X ff(se, "[no line attached by initial procedure]");
X stand_end();
X ff(se,"\r\n");
X if(quit_on_init_proc_fail)
X hangup(HANGUP_INIT_PROC_ERROR);
X stand_out();
X ff(se, "[press ESC to exit or SPACE for setup menu]");
X stand_end();
X itmp = ttygetc(0);
X ff(se,"\r\n");
X if(itmp == ESC)
X hangup(1);
X ttymode(1);
X setup_screen((char *)0);
X }
X else
X {
X
X ttymode(1);
X start_rcvr_process(0);
X }
X }
X else /* no initial procedure */
X {
X ttymode(1);
X setup_screen((optind < argc) ? argv[optind] : (char *)0);
X }
X
X hangup(xmtr()); /* enter xmtr operation */
X /*NOTREACHED*/
X} /* end of main */
X
X/* end of ecu.c */
X/* vi: set tabstop=4 shiftwidth=4: */
SHAR_EOF
$TOUCH -am 0701191590 ecu.c &&
chmod 0644 ecu.c ||
echo "restore of ecu.c failed"
set `wc -c ecu.c`;Wc_c=$1
if test "$Wc_c" != "9366"; then
echo original size 9366, current size $Wc_c
fi
# ============= help/lint_args.h ==============
if test ! -d 'help'; then
echo "x - creating directory help"
mkdir 'help'
fi
echo "x - extracting help/lint_args.h (Text)"
sed 's/^X//' << 'SHAR_EOF' > help/lint_args.h &&
X/* CHK=0x83EF */
X/*+-----------------------------------------------------------------------
X lint_args.h
X------------------------------------------------------------------------*/
X/*+:EDITS:*/
X/*:07-01-1990-19:18-afterlint-creation */
X
X#ifndef BUILDING_LINT_ARGS
X#ifdef LINT_ARGS
X
X/* helpgen.c */
Xint cmd_baud(void );
Xint cmd_break(void );
Xint cmd_cd(void );
Xint cmd_clrx(void );
Xint cmd_cls(void );
Xint cmd_color(void );
Xint cmd_continue(void );
Xint cmd_cursor(void );
Xint cmd_delline(void );
Xint cmd_dial(void );
Xint cmd_do(void );
Xint cmd_duplex(void );
Xint cmd_echo(void );
Xint cmd_eeol(void );
Xint cmd_else(void );
Xint cmd_exit(void );
Xint cmd_expresp(void );
Xint cmd_fchmod(void );
Xint cmd_fclose(void );
Xint cmd_fdel(void );
Xint cmd_fgetc(void );
Xint cmd_fgets(void );
Xint cmd_fkey(void );
Xint cmd_flush(void );
Xint cmd_fopen(void );
Xint cmd_fputc(void );
Xint cmd_fputs(void );
Xint cmd_fread(void );
Xint cmd_fseek(void );
Xint cmd_fwrite(void );
Xint cmd_getf(void );
Xint cmd_goto(void );
Xint cmd_gotob(void );
Xint cmd_hangup(void );
Xint cmd_hexdump(void );
Xint cmd_home(void );
Xint cmd_icolor(void );
Xint cmd_ifi(void );
Xint cmd_ifs(void );
Xint cmd_insline(void );
Xint cmd_lbreak(void );
Xint cmd_lgets(void );
Xint cmd_logevent(void );
Xint cmd_lookfor(void );
Xint cmd_mkvar(void );
Xint cmd_nap(void );
Xint cmd_parity(void );
Xint cmd_pclose(void );
Xint cmd_plog(void );
Xint cmd_popen(void );
Xint cmd_prompt(void );
Xint cmd_ptrace(void );
Xint cmd_putf(void );
Xint cmd_return(void );
Xint cmd_rk(void );
Xint cmd_rname(void );
Xint cmd_rs(void );
Xint cmd_rx(void );
Xint cmd_ry(void );
Xint cmd_rz(void );
Xint cmd_scrdump(void );
Xint cmd_send(void );
Xint cmd_set(void );
Xint cmd_sk(void );
Xint cmd_ss(void );
Xint cmd_sx(void );
Xint cmd_sy(void );
Xint cmd_system(void );
Xint cmd_sz(void );
Xint cmd_vidcolor(void );
Xint cmd_vidnorm(void );
Xint cmd_vidrev(void );
Xint cmd_whilei(void );
Xint cmd_whiles(void );
Xint cmd_xon(void );
Xint main(int ,char **,char **);
Xint usage(void );
Xstruct p_cmd *search_cmd_list(char *);
Xvoid build_ecudoc(void );
Xvoid build_ecuhelp(void );
Xvoid build_ecutxt(void );
Xvoid show_cmds(void );
Xvoid test_help(void );
X/* util.c */
Xchar to_lower(char );
Xchar to_upper(char );
Xvoid pad_zstr_to_len(char *,int );
X
X#else /* compiler doesn't know about prototyping */
X
X/* helpgen.c */
Xstruct p_cmd *search_cmd_list();
Xvoid build_ecudoc();
Xvoid build_ecuhelp();
Xvoid build_ecutxt();
Xvoid show_cmds();
Xvoid test_help();
X/* util.c */
Xchar to_lower();
Xchar to_upper();
Xvoid pad_zstr_to_len();
X
X#endif /* LINT_ARGS */
X#endif /* BUILDING_LINT_ARGS */
X
X/* end of lint_args.h */
SHAR_EOF
$TOUCH -am 0701191890 help/lint_args.h &&
chmod 0644 help/lint_args.h ||
echo "restore of help/lint_args.h failed"
set `wc -c help/lint_args.h`;Wc_c=$1
if test "$Wc_c" != "2587"; then
echo original size 2587, current size $Wc_c
fi
# ============= ECU280.P04 ==============
echo "x - extracting ECU280.P04 (Text)"
sed 's/^X//' << 'SHAR_EOF' > ECU280.P04 &&
X#-------------------------------------------------------
X# ECU280.P04
X# miscellaneous (see README)
X# created by gendiff x1.03 on 02 Jul 1990 00:09 UTC
X#-------------------------------------------------------
X*** /u4/ecurel/Make.ecu Sun Jul 1 20:08:15 1990
X--- Make.ecu Mon Jun 25 02:37:50 1990
X***************
X*** 81,87
X .c.o:; /bin/time cc -c $(CFLAGS) $*.c
X
X SHARFLS = README Make.ecu *.c *.h \
X! help/Makefile help/*.{c,src} \
X ecufriend/{Makefile,*.{c,h}} \
X ecuungetty/Makefile ecuungetty/*.{c,h} \
X mapkey/README mapkey/keys.usa.ecu.d\
X
X--- 81,87 -----
X .c.o:; /bin/time cc -c $(CFLAGS) $*.c
X
X SHARFLS = README Make.ecu *.c *.h \
X! help/Makefile help/*.{h,c,src} \
X ecufriend/{Makefile,*.{c,h}} \
X ecuungetty/Makefile ecuungetty/*.{c,h} \
X mapkey/README mapkey/keys.usa.ecu.d\
X*** /u4/ecurel/README Sun Jul 1 20:08:16 1990
X--- README Sun Jul 1 19:46:21 1990
X***************
X*** 341,343
X
X 2. The built-in help file (ecuhelp.data) was revised.
X
X
X--- 341,374 -----
X
X 2. The built-in help file (ecuhelp.data) was revised.
X
X+ Changes since ecu 2.80 patchlevel 2
X+
X+ 1. Patch 3 added a window mode selection to the sz file transfer menu;
X+ also, the unacknowledged data quantity (called "window") was
X+ added to the sz file transfer display.
X+
X+ Changes since ecu 2.80 patchlevel 3
X+
X+ 1. A problem with passing arguments to an initial procedure was
X+ fixed. Getopt() is now used, which requires that all switch
X+ command arguments must precede the non-switch arguments.
X+ This was not true in previous revisions of ecu.
X+
X+ 2. A new (non-standard) escape sequence has been added to the
X+ expresp procedure command. \m### causes a ### millisecond delay.
X+ Note this adds an ambiguity to the syntax of the send string:
X+ you may not follow an \m delay with a literal digit to send.
X+ For example, suppose you wish to delay 300 missileconds then
X+ send "4A". \m3004A will delay for 3004 (approximately) milliseconds,
X+ then send an "A". You must, instead, use \m300\034A to achieve
X+ the desired result.
X+
X+ 3. The method of choosing a shared memory segment key changed.
X+ Previously, ftok() was used. Now, the algorithm is
X+ 0xEC000000L | getpid();
X+
X+ 4. The -D switch has been added to cause ecu to terminate
X+ unconditionally upon completion of an initial procedure (-p).
X+
X+ 5. Other minor unreported bugs were fixed.
X+
X*** /u4/ecurel/doc/_features.txt Fri Apr 20 00:43:00 1990
X--- doc/_features.txt Sun Jun 10 13:35:44 1990
X***************
X*** 262,268
X process concept through commands and functions which allow
X .BL
X .LI
X! passing the ECU shared memory segment id (shmid) to a called
X program,
X .LI
X reading a single character or string of characters from
X
X--- 262,268 -----
X process concept through commands and functions which allow
X .BL
X .LI
X! passing the ECU shared memory segment id (%shmid) to a called
X program,
X .LI
X reading a single character or string of characters from
X***************
X*** 273,278
X reading and writing of characters, short or long integers and
X strings in the 1024-byte "friend" shared memory data area.
X .LE
X
X This facility allows batch and interactive applications
X to be developed with C programs which would be
X
X--- 273,295 -----
X reading and writing of characters, short or long integers and
X strings in the 1024-byte "friend" shared memory data area.
X .LE
X+
X+ The algorithm for obtaining the shared memory segment key is
X+ .DS L
X+ 0xEC000000L + transmitter process id
X+ .DE
X+ Thus a "friend" process may either use a %shmid
X+ .B
X+ shared memory key
X+ .R
X+ passed as an argument or obtain the
X+ .B
X+ shared memory key
X+ .R
X+ by using:
X+ .DS L
X+ key_t shmkey = 0xEC000000L | getppid();
X+ .DE
X
X This facility allows batch and interactive applications
X to be developed with C programs which would be
X*** /u4/ecurel/doc/_p_cmd.txt Sun Jul 1 20:07:13 1990
X--- doc/_p_cmd.txt Sun Jun 10 14:00:30 1990
X***************
X*** 455,460
X \\\c - no new-line
X \\\n - send new-line
X \\\nnn - send octal number
X Speed - Hayes-specific speed-adaptive connect handler
X .DE
X
X
X--- 455,462 -----
X \\\c - no new-line
X \\\n - send new-line
X \\\nnn - send octal number
X+ \\\m## - delay ## milliseconds (NOT SUPPORTED BY DIALERS;
X+ SEE BELOW)
X Speed - Hayes-specific speed-adaptive connect handler
X .DE
X
X***************
X*** 464,469
X The resolution for timeouts is limited to the basic tick time of
X your system (HZ, 10 msec for UNIX/386, 20 msec for XENIX/386 and XENIX/286).
X The timeout for 'Speed' expects is fixed at 90 seconds.
X
X .*s 3 "fchmod"
X
X
X--- 466,480 -----
X The resolution for timeouts is limited to the basic tick time of
X your system (HZ, 10 msec for UNIX/386, 20 msec for XENIX/386 and XENIX/286).
X The timeout for 'Speed' expects is fixed at 90 seconds.
X+
X+
X+ \\\m### causes a ### millisecond delay. Note this adds an ambiguity to
X+ the syntax of the send string: you may not follow an \m delay with a
X+ literal digit to send. For example, suppose you wish to delay 300
X+ missileconds then send "4A". \\\m3004A will delay for 3004
X+ (approximately) milliseconds, then send an "A". You must, instead, use
X+ \\\m300\\\034A to achieve the desired result.
X+
X
X .*s 3 "fchmod"
X
X*** /u4/ecurel/doc/_startup.txt Sat Apr 14 23:24:00 1990
X--- doc/_startup.txt Sun Jul 1 19:12:17 1990
X***************
X*** 107,114
X .DS I
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-t] <tel-number>
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-t]
X! ecu [-t] <logical>
X! ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-d] -p <proc> [<arg> ...]
X .DE
X
X .*s 3 "-l"
X
X--- 107,114 -----
X .DS I
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-t] <tel-number>
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-t]
X! ecu [-t] [-h] <logical>
X! ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-d] [-D] -p <proc> [<arg> ...]
X .DE
X
X .*s 3 "Non-Switch Arguments"
X***************
X*** 111,116
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-d] -p <proc> [<arg> ...]
X .DE
X
X .*s 3 "-l"
X
X When ECU starts up, it normally chooses a line as described later
X
X--- 111,159 -----
X ecu [-lxx] [-b<baud>] [-h] [-e|-o] [-d] [-D] -p <proc> [<arg> ...]
X .DE
X
X+ .*s 3 "Non-Switch Arguments"
X+
X+ Only one type of non-switch argument may be used on the command line.
X+ <tel-number> or <logical> may appear when the -p switch is absent.
X+ One or more <arg> arguments may appear when the -p switch is used.
X+
X+ .*s 3 "<tel-number>"
X+
X+ This type of argument has a digit as its initial character and
X+ represents an actual telephone number to be passed to a modem
X+ dialer program or Dialers chat script. The string may contain
X+ non-numeric characters if appropriate for a dialer program,
X+ such as dialTBIT. For example:
X+ .DS L
X+ ecu -l/dev/tty2a -b 19200 -e 5551212UC
X+ .DE
X+ uses tty2a (assumed to be connected to a Trailblazer modem) and
X+ establishes a 19200 baud, even parity PEP Compressed connection
X+ after dialing 5551212.
X+
X+ .*s 3 "<logical>"
X+
X+ This type of argument has an alphabetic initial character and
X+ causes the dialing directory entry by that name to be dialed.
X+ The line may be specified by '-l', but if the dialing directory
X+ specifies a line (tty field contaions other than 'Any'), the
X+ dialing directory entry will override it. The '-b', '-e' and '-o'
X+ switches are ignored; the values specified by the dialing directory
X+ entry are used. The '-t' and '-h' switches are valid and honored
X+ if present.
X+
X+ .*s 3 "<arg>"
X+
X+ This type of argument is passed to an initial procedure when
X+ the -p switch is present.
X+
X+ .DS L
X+ ecu -p unixlogin user pwd ansi43
X+ .DE
X+ executes unixlogin.ep with arguments 'user' 'pwd' 'ansi43'
X+
X+ For more detail, refer to the description of -p, -d and -D below.
X+
X .*s 3 "-l"
X
X When ECU starts up, it normally chooses a line as described later
X***************
X*** 172,178
X -d switch
X .R
X instructs ECU to "die" (terminate with error status) if
X! any specified initial procedure fails. This switch ensures a batch
X ECU execution will hang up any connection and terminate if
X a procedure error occurs.
X
X
X--- 215,221 -----
X -d switch
X .R
X instructs ECU to "die" (terminate with error status) if
X! an initial procedure (-p) fails. This switch ensures a batch
X ECU execution will hang up any connection and terminate if
X a procedure error occurs. See also -D below.
X
X***************
X*** 174,180
X instructs ECU to "die" (terminate with error status) if
X any specified initial procedure fails. This switch ensures a batch
X ECU execution will hang up any connection and terminate if
X! a procedure error occurs.
X
X Absence of the
X .B
X
X--- 217,223 -----
X instructs ECU to "die" (terminate with error status) if
X an initial procedure (-p) fails. This switch ensures a batch
X ECU execution will hang up any connection and terminate if
X! a procedure error occurs. See also -D below.
X
X Absence of the
X .B -d
X***************
X*** 177,185
X a procedure error occurs.
X
X Absence of the
X! .B
X! -d switch
X! .R
X causes ecu (upon any completion of the
X initial procedure) to enter the 1) interactive mode if a line
X was successfully attached by the procedure or 2) the setup menu
X
X--- 220,229 -----
X a procedure error occurs. See also -D below.
X
X Absence of the
X! .B -d
X! and
X! .B -D
X! switches
X causes ecu (upon any completion of the
X initial procedure) to enter the 1) interactive mode if a line
X was successfully attached by the procedure or 2) the setup menu
X***************
X*** 183,189
X causes ecu (upon any completion of the
X initial procedure) to enter the 1) interactive mode if a line
X was successfully attached by the procedure or 2) the setup menu
X! if not line was attached.
X
X .*s 3 "-t"
X
X
X--- 227,242 -----
X causes ecu (upon any completion of the
X initial procedure) to enter the 1) interactive mode if a line
X was successfully attached by the procedure or 2) the setup menu
X! if no line was attached.
X!
X! .*s 3 "-D"
X!
X! The
X! .B
X! -D switch
X! .R
X! instructs ECU to unconditionally terminate when an
X! initial procedure finishes.
X
X .*s 3 "-t"
X
X*** /u4/ecurel/doc/_top.txt Sun Jul 1 20:07:14 1990
X--- doc/_top.txt Sun Jun 10 13:57:32 1990
X***************
X*** 27,33
X .sp 1i
X .ce 100
X Technical Description
X! Revision 1.23 (ecu 2.80.01)
X \n(mo/\n(dy/\n(yr
X .ce 0
X .ls 1
X
X--- 27,33 -----
X .sp 1i
X .ce 100
X Technical Description
X! Revision 1.24 (ecu 2.80.04)
X \n(mo/\n(dy/\n(yr
X .ce 0
X .ls 1
X*** /u4/ecurel/ecufork.c Wed May 9 09:16:00 1990
X--- ecufork.c Sat Jun 9 01:37:06 1990
X***************
X*** 174,180
X static int path_count = 0;
X char *cptr;
X char *getenv();
X- char *str_token();
X
X if(path_buf == (char *)0)
X {
X
X--- 174,179 -----
X static int path_count = 0;
X char *cptr;
X char *getenv();
X
X if(path_buf == (char *)0)
X {
X*** /u4/ecurel/ecuicmd.c Sun Jul 1 20:08:17 1990
X--- ecuicmd.c Mon Jun 4 17:16:15 1990
X***************
X*** 10,15
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-10-1990-16:44-wht@n4hgf-move patchlevel to ecu.c hello_str */
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-17-1990-15:26-wht@n4hgf-add icmd call to icmd_history_add */
X
X--- 10,16 -----
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:05-30-1990-01:04-wht@n4hgf-split stat "Connected" line into two lines */
X /*:05-10-1990-16:44-wht@n4hgf-move patchlevel to ecu.c hello_str */
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-17-1990-15:26-wht@n4hgf-add icmd call to icmd_history_add */
X***************
X*** 512,520
X (shm->Lparity) ? to_upper(shm->Lparity) : 'N');
X if(shm->Lmodem_off_hook)
X {
X! ff(se,"Connected to %s: %s (%s) at %s (elapsed %s)\r\n",
X! shm->Lrname,
X! shm->Ldescr,shm->Ltelno,
X epoch_secs_to_str(shm->Loff_hook_time,1,s80),
X get_elapsed_time(time((long *)0) - shm->Loff_hook_time));
X }
X
X--- 513,521 -----
X (shm->Lparity) ? to_upper(shm->Lparity) : 'N');
X if(shm->Lmodem_off_hook)
X {
X! ff(se,"Connected to %s: %s (%s)\r\n",
X! shm->Lrname,shm->Ldescr,shm->Ltelno);
X! ff(se,"at %s (elapsed %s)\r\n",
X epoch_secs_to_str(shm->Loff_hook_time,1,s80),
X get_elapsed_time(time((long *)0) - shm->Loff_hook_time));
X }
X*** /u4/ecurel/eculine.c Sun Jul 1 20:07:33 1990
X--- eculine.c Sun Jun 24 19:31:11 1990
X***************
X*** 8,13
X lbreak()
X lclear_xmtr_xoff()
X lclose()
X lflush(flush_type)
X lget_xon_xoff(ixon,ixoff)
X lgetc_timeout(msec)
X
X--- 8,14 -----
X lbreak()
X lclear_xmtr_xoff()
X lclose()
X+ ldraino(inflush_flag)
X lflush(flush_type)
X lget_xon_xoff(ixon,ixoff)
X lgetc_timeout(msec)
X***************
X*** 35,40
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-19-1990-03:07-wht@n4hgf-GCC run found unused vars -- rm them */
X /*:04-10-1990-17:34-wht@n4hgf-provisions for ecu xmtr logging when rcvr dead */
X
X--- 36,42 -----
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:05-31-1990-15:56-wht@n4hgf-add ldraino */
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-19-1990-03:07-wht@n4hgf-GCC run found unused vars -- rm them */
X /*:04-10-1990-17:34-wht@n4hgf-provisions for ecu xmtr logging when rcvr dead */
X***************
X*** 556,561
X ioctl(shm->Liofd,TCSETA,(char *)&Ltermio);
X
X } /* end of lreset_ksr */
X
X /*+-----------------------------------------------------------------------
X lputc(lchar) -- write lchar to comm line
X
X--- 558,576 -----
X ioctl(shm->Liofd,TCSETA,(char *)&Ltermio);
X
X } /* end of lreset_ksr */
X+
X+ /*+-------------------------------------------------------------------------
X+ ldraino(inflush_flag) - wait for output to drain
X+
X+ If inflush_flag is set, also flush input after output drains
X+ --------------------------------------------------------------------------*/
X+ void
X+ ldraino(inflush_flag)
X+ int inflush_flag;
X+ {
X+ ioctl(shm->Liofd,(inflush_flag) ? TCSETAF : TCSETAW,(char *)&Ltermio);
X+
X+ } /* end of ldraino */
X
X /*+-----------------------------------------------------------------------
X lputc(lchar) -- write lchar to comm line
X*** /u4/ecurel/ecunumrev.c Sun Jul 1 20:08:19 1990
X--- ecunumrev.c Sun Jun 24 19:13:17 1990
X***************
X*** 16,22
X #endif
X
X #ifdef WHT
X! char *numeric_revision = "twx280.07";
X #else
X #ifdef SCO
X char *numeric_revision = "sco2.80";
X
X--- 16,22 -----
X #endif
X
X #ifdef WHT
X! char *numeric_revision = "twx280.14";
X #else
X #ifdef SCO
X char *numeric_revision = "sco2.80";
X*** /u4/ecurel/ecushm.c Mon May 7 23:33:00 1990
X--- ecushm.c Sun Jun 10 15:47:12 1990
X***************
X*** 19,24
X
X --------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-19-1990-03:07-wht@n4hgf-GCC run found unused vars -- rm them */
X /*:03-25-1990-14:11-wht@n4hgf------ x2.70 ------- */
X
X--- 19,25 -----
X
X --------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:06-02-1990-11:51-wht@n4hgf-new key determination */
X /*:05-07-1990-21:23-wht@n4hgf---- 2.80 --- */
X /*:04-19-1990-03:07-wht@n4hgf-GCC run found unused vars -- rm them */
X /*:03-25-1990-14:11-wht@n4hgf------ x2.70 ------- */
X***************
X*** 56,63
X extern int rcvr_log_gen_title;
X
X ECU_SDS FAR *shm; /* shared segment pointer */
X! char shm_name[130] = ""; /* filename from which to derive key */
X! key_t shm_key;
X int shm_shmid;
X
X /*+-------------------------------------------------------------------------
X
X--- 57,63 -----
X extern int rcvr_log_gen_title;
X
X ECU_SDS FAR *shm; /* shared segment pointer */
X! key_t shm_key;
X int shm_shmid;
X
X /*+-------------------------------------------------------------------------
X***************
X*** 66,73
X --------------------------------------------------------------------------*/
X shm_init()
X {
X- uint old_umask = umask(0);
X- int fd;
X char FAR *shmat();
X
X sprintf(shm_name,"/tmp/ecu%05d.shm",getpid());
X
X--- 66,71 -----
X --------------------------------------------------------------------------*/
X shm_init()
X {
X char FAR *shmat();
X
X shm_key = 0xEC000000L | getpid();
X***************
X*** 70,84
X int fd;
X char FAR *shmat();
X
X! sprintf(shm_name,"/tmp/ecu%05d.shm",getpid());
X! if((fd = open(shm_name,O_CREAT | O_RDWR,0600)) < 0)
X! {
X! fputs("creation of ",se);
X! perror(shm_name);
X! umask(old_umask);
X! exit(11);
X! }
X! close(fd);
X
X if((shm_key = ftok(shm_name,1)) < 0)
X {
X
X--- 68,74 -----
X {
X char FAR *shmat();
X
X! shm_key = 0xEC000000L | getpid();
X
X if((shm_shmid = shmget(shm_key,sizeof(ECU_SDS),IPC_CREAT | 0600)) < 0)
X {
X***************
X*** 80,95
X }
X close(fd);
X
X- if((shm_key = ftok(shm_name,1)) < 0)
X- {
X- fputs("ftok of ",se);
X- perror(shm_name);
X- umask(old_umask);
X- unlink(shm_name);
X- exit(11);
X- }
X- unlink(shm_name);
X-
X if((shm_shmid = shmget(shm_key,sizeof(ECU_SDS),IPC_CREAT | 0600)) < 0)
X {
X perror("shmget");
X
X--- 70,75 -----
X
X shm_key = 0xEC000000L | getpid();
X
X if((shm_shmid = shmget(shm_key,sizeof(ECU_SDS),IPC_CREAT | 0600)) < 0)
X {
X perror("shmget");
X***************
X*** 93,99
X if((shm_shmid = shmget(shm_key,sizeof(ECU_SDS),IPC_CREAT | 0600)) < 0)
X {
X perror("shmget");
X- umask(old_umask);
X exit(11);
X }
X
X
X--- 73,78 -----
X if((shm_shmid = shmget(shm_key,sizeof(ECU_SDS),IPC_CREAT | 0600)) < 0)
X {
X perror("shmget");
X exit(11);
X }
X
X***************
X*** 100,106
X if(((char FAR *)shm = shmat(shm_shmid,(char FAR *)0,0)) == (char FAR *)-1)
X {
X perror("shmat");
X- umask(old_umask);
X exit(11);
X }
X
X
X--- 79,84 -----
X if(((char FAR *)shm = shmat(shm_shmid,(char FAR *)0,0)) == (char FAR *)-1)
X {
X perror("shmat");
X exit(11);
X }
X
X***************
X*** 103,110
X umask(old_umask);
X exit(11);
X }
X-
X- umask(old_umask);
X
X shm->xcmd = 0; /* signal from xmtr to rcvr SIGUSR2 */
X shm->xi1 = 0; /* parameters */
X
X--- 81,86 -----
X perror("shmat");
X exit(11);
X }
X
X shm->xcmd = 0; /* signal from xmtr to rcvr SIGUSR2 */
X shm->xi1 = 0; /* parameters */
X*** /u4/ecurel/ecuusage.c Mon May 7 23:33:00 1990
X--- ecuusage.c Sun Jul 1 19:06:42 1990
X***************
X*** 10,15
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:03-25-1990-14:11-wht@n4hgf------ x2.70 ------- */
X /*:07-03-1989-22:57-wht------ x2.00 ----- */
X
X--- 10,16 -----
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:07-01-1990-19:06-wht@n4hgf-add -D usage information */
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:03-25-1990-14:11-wht@n4hgf------ x2.70 ------- */
X /*:07-03-1989-22:57-wht------ x2.00 ----- */
X***************
X*** 26,32
X
X char *usage_text[] =
X {
X! "usage: ecu [-l /dev/tty<ttynum>] [-b <baud_rate>] [-e] [-o]\r\n",
X " [-c <filename>] [-h] [-k] [-t] [-v[vv...]]\r\n",
X " [-p <initial_proc> | <phone_number>]\r\n",
X "Default: 2400,N,8 (use -e for even parity, -o for odd 7 data bits)\r\n",
X
X--- 27,33 -----
X
X char *usage_text[] =
X {
X! "usage: ecu [-l /dev/tty<ttynum>] [-b <baud_rate>] [-e] [-o] [-d]\r\n",
X " [-c <filename>] [-h] [-k] [-t] [-v[vv...]]\r\n",
X " [-p <initial_proc> | <phone_number>]\r\n",
X "Default: 2400,N,8 (use -e for even parity, -o for odd 7 data bits)\r\n",
X***************
X*** 33,38
X "-c <filename> use this file rather than ~/.ecumodem\r\n",
X "-h half duplex ... default is full duplex\r\n",
X "-v verbosity ... the more 'v's the more verbosity.\r\n",
X "\r\n",
X "For a list of built in commands, type HOME?<ENTER> once program started\r\n",
X "\r\n",
X
X--- 34,41 -----
X "-c <filename> use this file rather than ~/.ecumodem\r\n",
X "-h half duplex ... default is full duplex\r\n",
X "-v verbosity ... the more 'v's the more verbosity.\r\n",
X+ "-d stop execution if -p initial procedure fails\r\n",
X+ "-D unconditionally stop execution when -p initial procedure is done\r\n",
X "\r\n",
X "For a list of built in commands, type HOME?<ENTER> once program started\r\n",
X "\r\n",
X*** /u4/ecurel/ecuutil.c Mon May 7 23:33:00 1990
X--- ecuutil.c Thu Jun 7 15:38:52 1990
X***************
X*** 31,36
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:05-02-1990-13:25-wht@n4hgf-added double quote to shell metachar list */
X /*:04-19-1990-14:56-wht@n4hgf-my GCC is uses XENIX libs/turn on mkdir for it */
X
X--- 31,37 -----
X
X ------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:06-07-1990-15:38-wht@n4hgf-^? w/o true incl_3_char left gg unterminated */
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:05-02-1990-13:25-wht@n4hgf-added double quote to shell metachar list */
X /*:04-19-1990-14:56-wht@n4hgf-my GCC is uses XENIX libs/turn on mkdir for it */
X***************
X*** 404,409
X gg[1] = '?';
X if(incl_3char)
X strcpy(&gg[2]," DEL");
X }
X else
X {
X
X--- 405,412 -----
X gg[1] = '?';
X if(incl_3char)
X strcpy(&gg[2]," DEL");
X+ else
X+ gg[2] = 0;
X }
X else
X {
X*** /u4/ecurel/ecuxenix.c Wed May 9 09:49:00 1990
X--- ecuxenix.c Thu May 31 17:04:48 1990
X***************
X*** 545,550
X if(narg < 3)
X {
X fputs(" usage: sgr mode cmd\r\n",se);
X return;
X }
X if((fplog = fopen(fname,"a")) == NULL)
X
X--- 545,552 -----
X if(narg < 3)
X {
X fputs(" usage: sgr mode cmd\r\n",se);
X+ fputs("mode = 0 for sanitized response, 1 == raw\r\n",se);
X+ fputs("cmd = 'Send' style string (see /usr/lib/uucp/Dialers)\r\n",se);
X return;
X }
X if((fplog = fopen(fname,"a")) == NULL)
X***************
X*** 570,587
X
X fputs("\r\n",se);
X
X! fprintf(fplog,"\nMode: %d ",mode);
X! fputs("Stimulus: ",fplog);
X! for(iarg = 2; iarg < narg; iarg++)
X! {
X! fputs(arg[iarg],fplog);
X! lputs_paced(20,arg[iarg]);
X! if(iarg != (narg - 1))
X! {
X! fputc(' ',fplog);
X! lputc_paced(20,' ');
X! }
X! }
X fputs("\nResponse: \n",fplog);
X lputc_paced(20,'\r');
X
X
X--- 572,579 -----
X
X fputs("\r\n",se);
X
X! fprintf(fplog,"\nMode: %d Stimulus: %s",mode,arg[2]);
X! fputs("Response: \r\n",se);
X fputs("\nResponse: \n",fplog);
X respond(arg[2]);
X lgets_timeout(&lr);
X***************
X*** 583,590
X }
X }
X fputs("\nResponse: \n",fplog);
X! lputc_paced(20,'\r');
X!
X lgets_timeout(&lr);
X itmp = lr.count;
X cptr = strchr(buf,'\n') + 1;
X
X--- 575,581 -----
X fprintf(fplog,"\nMode: %d Stimulus: %s",mode,arg[2]);
X fputs("Response: \r\n",se);
X fputs("\nResponse: \n",fplog);
X! respond(arg[2]);
X lgets_timeout(&lr);
X itmp = lr.count;
X cptr = strchr(buf,'\n') + 1;
X***************
X*** 589,595
X itmp = lr.count;
X cptr = strchr(buf,'\n') + 1;
X itmp -= (int)(cptr - buf);
X! hex_dump_fp(fplog,cptr,itmp,(char *)0,1);
X
X itmp = lr.count;
X cptr = buf;
X
X--- 580,587 -----
X itmp = lr.count;
X cptr = strchr(buf,'\n') + 1;
X itmp -= (int)(cptr - buf);
X! hex_dump_fp(fplog,cptr,itmp,(char *)0,(itmp <= 16));
X! fclose(fplog);
X
X itmp = lr.count;
X cptr = buf;
X***************
X*** 600,606
X fputc(*cptr++,se);
X }
X
X- fclose(fplog);
X if(rcvr_alive)
X start_rcvr_process(0);
X } /* end of send_get_response */
X
X--- 592,597 -----
X fputc(*cptr++,se);
X }
X
X if(rcvr_alive)
X start_rcvr_process(0);
X } /* end of send_get_response */
X*** /u4/ecurel/ecuxfer.c Sun Jul 1 20:08:20 1990
X--- ecuxfer.c Wed May 30 15:17:42 1990
X***************
X*** 466,471
X p_overwrite = 1; /* assume overwrite */
X p_xfernew = 0; /* assume send only newer */
X p_filelist[0] = 0; /* no filenames yet */
X zwindw_size = 0; /* assume full streaming sz */
X
X switch(to_lower(*(argv[0] + 1)))
X
X--- 466,474 -----
X p_overwrite = 1; /* assume overwrite */
X p_xfernew = 0; /* assume send only newer */
X p_filelist[0] = 0; /* no filenames yet */
X+ #ifdef WHT
X+ zwindw_size = 16384; /* my preference */
X+ #else
X zwindw_size = 0; /* assume full streaming sz */
X #endif
X
X***************
X*** 467,472
X p_xfernew = 0; /* assume send only newer */
X p_filelist[0] = 0; /* no filenames yet */
X zwindw_size = 0; /* assume full streaming sz */
X
X switch(to_lower(*(argv[0] + 1)))
X {
X
X--- 470,476 -----
X zwindw_size = 16384; /* my preference */
X #else
X zwindw_size = 0; /* assume full streaming sz */
X+ #endif
X
X switch(to_lower(*(argv[0] + 1)))
X {
X*** /u4/ecurel/expresp.c Mon May 7 23:33:00 1990
X--- expresp.c Thu May 31 16:23:32 1990
X***************
X*** 16,21
X \c - no new-line
X \n - send new-line
X \nnn - send octal number
X Speed - Hayes-specific speed-adaptive connect handler
X
X Defined functions:
X
X--- 16,22 -----
X \c - no new-line
X \n - send new-line
X \nnn - send octal number
X+ \m### - sleep ### (decimal) milliseconds (non-standard)
X Speed - Hayes-specific speed-adaptive connect handler
X
X Defined functions:
X***************
X*** 26,31
X
X --------------------------------------------------------------------------*/
X /*+:EDITS:*/
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:04-02-1990-02:17-wht@n4hgf-Dialers support appears to work */
X /*:04-01-1990-19:28-wht@n4hgf-more work */
X
X--- 27,33 -----
X
X --------------------------------------------------------------------------*/
X /*+:EDITS:*/
X+ /*:05-31-1990-15:59-wht@n4hgf-add 'm'illisec pause and ldraino use */
X /*:05-07-1990-21:24-wht@n4hgf---- 2.80 --- */
X /*:04-02-1990-02:17-wht@n4hgf-Dialers support appears to work */
X /*:04-01-1990-19:28-wht@n4hgf-more work */
X***************
X*** 46,51
X #define ERDEBUG(verb,str,arg) if(expresp_verbosity >= verb) \
X pprintf(str,arg);
X
X extern int proctrace;
X extern int interrupt;
X
X
X--- 48,55 -----
X #define ERDEBUG(verb,str,arg) if(expresp_verbosity >= verb) \
X pprintf(str,arg);
X
X+ long atol();
X+
X extern int proctrace;
X extern int interrupt;
X
X***************
X*** 175,180
X register char *str;
X {
X int itmp;
X char s4[4];
X int send_no_cr = 0;
X
X
X--- 179,185 -----
X register char *str;
X {
X int itmp;
X+ long ltmp;
X char s4[4];
X int send_no_cr = 0;
X
X***************
X*** 189,195
X strncpy(s4,str,3);
X s4[3] = 0;
X sscanf(s4,"%o",&itmp);
X! str += strspn(s4,"01234567");
X lputc((char)itmp);
X }
X else switch(*str)
X
X--- 194,200 -----
X strncpy(s4,str,3);
X s4[3] = 0;
X sscanf(s4,"%o",&itmp);
X! str += strspn(s4,"01234567") - 1; /* -1 cause str++ later */
X lputc((char)itmp);
X }
X else switch(*str)
X***************
X*** 195,200
X else switch(*str)
X {
X case 'p': /* pause (approximately 1/4-1/2 second delay) */
X nap(400L);
X break;
X case 'd': /* delay (2 seconds) */
X
X--- 200,206 -----
X else switch(*str)
X {
X case 'p': /* pause (approximately 1/4-1/2 second delay) */
X+ ldraino(0); /* wait for output to drain */
X nap(400L);
X break;
X case 'm': /* nap a while (non-standard) */
X***************
X*** 197,202
X case 'p': /* pause (approximately 1/4-1/2 second delay) */
X nap(400L);
X break;
X case 'd': /* delay (2 seconds) */
X nap(2000L);
X break;
X
X--- 203,214 -----
X ldraino(0); /* wait for output to drain */
X nap(400L);
X break;
X+ case 'm': /* nap a while (non-standard) */
X+ ltmp = atol(str + 1);
X+ str += strspn(str + 1,"0123456789");
X+ ldraino(0); /* wait for output to drain */
X+ nap(ltmp);
X+ break;
X case 'd': /* delay (2 seconds) */
X ldraino(0); /* wait for output to drain */
X nap(2000L);
X***************
X*** 198,203
X nap(400L);
X break;
X case 'd': /* delay (2 seconds) */
X nap(2000L);
X break;
X case 'D': /* phone number/token */
X
X--- 210,216 -----
X nap(ltmp);
X break;
X case 'd': /* delay (2 seconds) */
X+ ldraino(0); /* wait for output to drain */
X nap(2000L);
X break;
X case 'D': /* phone number/token */
X***************
X*** 242,247
X
X if(expresp_echo_check)
X {
X nap(40L); /* fake it */
X lflush(0); /* flush input */
X }
X
X--- 255,261 -----
X
X if(expresp_echo_check)
X {
X+ ldraino(1); /* wait for output to drain, then flush input */
X nap(40L); /* fake it */
X }
X str++;
X***************
X*** 243,249
X if(expresp_echo_check)
X {
X nap(40L); /* fake it */
X- lflush(0); /* flush input */
X }
X str++;
X }
X
X--- 257,262 -----
X {
X ldraino(1); /* wait for output to drain, then flush input */
X nap(40L); /* fake it */
X }
X str++;
X }
SHAR_EOF
$TOUCH -am 0701201490 ECU280.P04 &&
chmod 0644 ECU280.P04 ||
echo "restore of ECU280.P04 failed"
set `wc -c ECU280.P04`;Wc_c=$1
if test "$Wc_c" != "28750"; then
echo original size 28750, current size $Wc_c
fi
# ============= APPLY.P04 ==============
echo "x - extracting APPLY.P04 (Text)"
sed 's/^X//' << 'SHAR_EOF' > APPLY.P04 &&
X:
X#--------------------------------------------------------------
X# APPLY.P04 - ensure patch 3 already applied and apply patch 4
X#--------------------------------------------------------------
Xif fgrep 'PATCHLEVEL 3' patchlevel.h > /dev/null 2>&1
X then
X echo 'Applying patch 4';
X else
X echo 'You must apply patch 3 first (or patch 4 already applied)';
X exit 1;
Xfi
Xpatch -p < ECU280.P04
Xcat > patchlevel.h << PLEOF
X#define PATCHLEVEL 4
XPLEOF
Xexit 0
SHAR_EOF
$TOUCH -am 0701200190 APPLY.P04 &&
chmod 0755 APPLY.P04 ||
echo "restore of APPLY.P04 failed"
set `wc -c APPLY.P04`;Wc_c=$1
if test "$Wc_c" != "470"; then
echo original size 470, current size $Wc_c
fi
exit 0