wht@gatech.edu@n4hgf.UUCP (Warren Tucker) (08/17/90)
Posting-number: Volume 14, Issue 54
Submitted-by: wht@gatech.edu@n4hgf.UUCP (Warren Tucker)
Archive-name: u386mon-2.20/part01
This is u386mon 2.20, a "performance" monitor, ostensibly for SCO
UNIX V/386 and ISC 386/ix, although it has been ported to a 68k
VME System V Release 3.1 platform and to ISC 1.0.x and to the
Tandem Integrity S2 (both S5R3.0-ish). Also, a renice is
included as an example of alternate uses of the kmem/mem/swap
utility objects.
U386mon has been tested on SCO 3.2.0 and 3.2.1 and ISC 1.0.x,
2.0.x and 2.2.x, Tandem Integrity S2 NonStop-UX and at least one
MC68000 VME-based Sys V Rel 3.1 system.
These may work with other UNIX System 5 Release 3.x systems with
a little work. XENIX systems have greatly different kernel
implementations and use xlist instead of nlist. These programs
will not work there; sorry. Someone reported he was working on a
port to XENIX, but jct!jct's mon386 is great (posted to
comp.unix.xenix on 11 Jul 89 in 9 parts, starting with
Message-ID: <278@jct.UUCP>).
U386mon requires terminfo style curses and will use color if you
have it. It works best with a 43 line (or greater) screen, but
will work with a 25 line screen with some limitations. It has
been tested with 25 and 43 line screens on the multiscreen
console and on a Wyse 60 (under SCO, using terminfo wy60, using
interesting "color" mappings). On ISC, 43-line xterms are
reported to work nicely.
#!/bin/sh
# This is u386mon.2.20, a shell archive (shar 3.40)
# made 08/10/1990 18:38 UTC by wht@n4hgf
# Source directory /u1/src/u386mon
#
# existing files WILL be overwritten
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 18453 -rw-r--r-- README
# 1393 -rw-r--r-- EXPLAIN
# 8960 -rw-r--r-- Makefile.sco
# 8187 -rw-r--r-- Makefile.isc1
# 9008 -rw-r--r-- Makefile.isc2
# 8927 -rw-r--r-- Makefile.dell
# 7855 -rw-r--r-- Makefile.s2
# 7829 -rw-r--r-- Makefile.sVr31
# 6946 -rw-r--r-- bootinfo.c
# 7827 -rw-r--r-- detail.c
# 20369 -rw-r--r-- det_proc.c
# 13068 -rw-r--r-- det_sio.c
# 6034 -rw-r--r-- disputil.c
# 1135 -rw-r--r-- kludge.c
# 3348 -rw-r--r-- libkmem.c
# 3088 -rw-r--r-- libmem.c
# 19896 -rw-r--r-- libpanel.c
# 2274 -rw-r--r-- libswap.c
# 3209 -rw-r--r-- libnlsym.c
# 3306 -rw-r--r-- nlsym.c
# 4236 -rw-r--r-- proc.c
# 2406 -rw-r--r-- tune.c
# 37979 -rw-r--r-- u386mon.c
# 2469 -rw-r--r-- var.c
# 1925 -rw-r--r-- config.h
# 1133 -rw-r--r-- libkmem.h
# 1129 -rw-r--r-- libmem.h
# 2253 -rw-r--r-- libpanel.h
# 1054 -rw-r--r-- libswap.h
# 1100 -rw-r--r-- libnlsym.h
# 7561 -rw-r--r-- lint_args.h
# 6124 -rw-r--r-- nlsym.h
# 4612 -rw-r--r-- u386mon.h
# 1200 -rw-r--r-- renice/Makefile
# 4465 -rw-r--r-- renice/renice.c
# 3033 -rw-r--r-- panel/README
# 4935 -rw-r--r-- panel/panel.3
# 6321 -rw-r--r-- panel/ptest.c
# 349 -rw-r--r-- panel/Makefile
#
if touch 2>&1 | fgrep 'amc' > /dev/null
then TOUCH=touch
else TOUCH=true
fi
# ============= README ==============
echo "x - extracting README (Text)"
sed 's/^X//' << 'SHAR_EOF' > README &&
Xu386mon README - last updated Fri Aug 10 04:35:28 EDT 1990
X
XThis is u386mon 2.20, a "performance" monitor, ostensibly for SCO
XUNIX V/386 and ISC 386/ix, although it has been ported to a 68k
XVME System V Release 3.1 platform and to ISC 1.0.x and to the
XTandem Integrity S2 (both S5R3.0-ish). Also, a renice is
Xincluded as an example of alternate uses of the kmem/mem/swap
Xutility objects.
X
XU386mon has been tested on SCO 3.2.0 and 3.2.1 and ISC 1.0.x,
X2.0.x and 2.2.x, Tandem Integrity S2 NonStop-UX and at least one
XMC68000 VME-based Sys V Rel 3.1 system.
X
XThese may work with other UNIX System 5 Release 3.x systems with
Xa little work. XENIX systems have greatly different kernel
Ximplementations and use xlist instead of nlist. These programs
Xwill not work there; sorry. Someone reported he was working on a
Xport to XENIX, but jct!jct's mon386 is great (posted to
Xcomp.unix.xenix on 11 Jul 89 in 9 parts, starting with
XMessage-ID: <278@jct.UUCP>).
X
XU386mon requires terminfo style curses and will use color if you
Xhave it. It works best with a 43 line (or greater) screen, but
Xwill work with a 25 line screen with some limitations. It has
Xbeen tested with 25 and 43 line screens on the multiscreen
Xconsole and on a Wyse 60 (under SCO, using terminfo wy60, using
Xinteresting "color" mappings). On ISC, 43-line xterms are
Xreported to work nicely.
X
XOn a 20Mhz Compaq 386 running SCO UNIX 3.2.0, u386mon on a
X43-line VGA, with a two second update interval, appears to
Xconsume 3 to 5% of the CPU when in the "main" display and about
X7 to 11% when displaying process status (NPROC, v.v_proc == 100).
XThis is a bit expensive, but the job is sorta hard: according to
Xprof(1)/prof(CP), 50% of the time is spent in curses.
XOf course, on the Tandem Integrity S2 (a MIPS based machine), these
Xfigures were MUCH, MUCH lower :-).
X
XThis little light show has already helped me diagnose the traditional
X"stop-the-world-and-beat-disk-continually-for-15-seconds" problem as
Xmemory exhaustion. It has also been a good learning experience.
X
XThanks to peter@radig.de (Peter Radig), dug@kd4nc (Doug Drye),
Xjdc@uudell.dell.com (Jeremy Chatfield), andy@rbdc (Andy Pitts),
Xtrb@ima.ima.isc.com (Andrew Tannenbaum) for the help with ISC 386/ix.
X
XThanks to nba@sysware.sysware.dk (Neils Baggesen) and allbery@ncoast.org
X(Brandon Allbery) for the System V Release 3.1 work.
X
XThanks to jmd@p1so (gatech!n4hgf!p1so!jmd, John Dashner) for the Tandem
XS2 work.
X
XRead through this and you will finally reach "How to get going" below.
X
XSample output (somewhat obsolete)
X=================================
X(with 43-line screen; a 25 line screen will be missing Var/Bootinfo/Tune/Proc
Xon the 'main' display)
X
X u386mon 2.11/SCO 3.2 - n4hgf 04:39:36 wht@n4hgf
X---- CPU --- tot usr ker brk ---------------------------------------------------
X Instant % 93 54 39 0 uuuuuuuuuuuuuuuuuuuuuuuuuuukkkkkkkkkkkkkkkkkkk
X 5 Sec Avg % 87 26 61 0 uuuuuuuuuuuuukkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
X10 Sec Avg % 89 45 44 0 uuuuuuuuuuuuuuuuuuuuuukkkkkkkkkkkkkkkkkkkkkk
X---- Wait -- tot io pio swp -- (% of real time) -------------------------------
X Instant % 5 5 0 0 ii
X 5 Sec Avg % 12 12 0 0 iiiiii
X10 Sec Avg % 9 9 0 0 iiii
X---- Sysinfo/Minfo --- (last 1000 msec activity) ------------------------------
Xbread 5 readch 60416 pswitch 21 vfault 1 unmodsw 0
Xbwrite 9 writch 2507 syscall 261 demand 1 unmodfl 0
Xlread 331 rawch 2 sysread 100 pfault 15 psoutok 0
Xlwrite 42 canch 0 syswrit 4 cw 0 psinfai 0
Xphread 0 outch 2508 sysfork 1 steal 15 psinok 0
Xphwrite 0 msg 0 sysexec 0 frdpgs 0 rsout 0
Xswapin 0 sema 0 vfpg 0 rsin 0
Xswapout 0 maxmem 5724k runque 0 sfpg 0
Xbswapin 0 frmem 3284k runocc 0 vspg 0 pages on
Xbswapout 0 mem used 43% swpque 0 sspg 0 swap 0
Xiget 72 nswap 10000k swpocc 0 pnpfault 0 cache 0
Xnamei 71 frswp 10000k wrtfault 0 file 0
Xdirblk 92 swp used 0%
X
X
X
X-- Var --------- -- Bootinfo ---------- -- Tune --------- -- Proc ---
Xv_autoup 10 basemem 640k t_ageintvl 9 sleep 22
Xv_buf 600 extmem 6144k t_bdflushr 1 run 1
Xv_clist 200 bflags 00000000 t_gpgshi 40 zombie 0
Xv_file 200 memory available t_gpgslo 25 stop 0
Xv_hbuf 64 00000000 000a0000 t_gpgsmsk 0x420 idle 0
Xv_inode 200 00100000 00600000 t_maxfc 1 onproc 1
Xv_maxpmem 0 00f40000 00060000 NODM t_maxsc 1 xbrk 0
Xv_maxup 60 memory used t_maxumem 2560 total 24
Xv_mount 5 00000000 00004000 RSVD t_minarmem 25 in mem 24
Xv_pbuf 20 006bb000 00037000 KBSS t_minasmem 25
Xv_proc 100 006f2000 0000e000 KDTA
Xv_region 210 00fa9000 00057000 KTXT
Xv_vhndfrac 16
X
XThe main display
X================
X
XA brief description of reported information:
X
X0. The '+' and '-' command adds or subtracts one second from the
X update interval. The value at startup is 2 seconds, the
X range 1 to 4. Below, the terms "x1", "x5" and "x10" mean
X "interval X 1", "interval times 5" and "interval times 10,"
X respectively.
X
X You can determine the update interval by looking at the top
X CPU histogram, labeled "Instant" for 1, "X sec" for 2-4 second
X intervals.
X
X On some *fast* systems, values may be too large in 3 and 4
X second intervals and corrupt the display. But the, you have
X the extra CPU to run it more often :-).
X
X1. The CPU utilization is shown with smoothing of x1 ("instant" if
X the update interval is 1 second), x5 and x10 seconds. Total
X CPU usage is shown, with user, kernel and "break" subdivided.
X Most performance utilities (vmstat) lump kernel (CPU_KERNEL)
X and wait (CPU_WAIT) times together as kernel time. u386mon
X considers CPU_WAIT time as idle (the CPU could have been
X doing something if an otherwise ready process wasn't waited).
X
X On a color display, total cpu utilization is displayed in
X green if the cpu utilization is below 70%, yellow if utilization
X is between 70% and 89% and red if 90% or above.
X
X2. The Wait display shows the x1, x5 and x10 second smoothed
X percentages of real time no process could be run because
X otherwise ready to run processes were waiting on logical,
X swap or physical I/O.
X
X On a color display, total wait time is displayed in green if
X it is below 30%, yellow if utilization is between 30% and 49%
X and red if 50% or above.
X
X3. Sysinfo/Minfo display shows, generally, the number of events
X for a measured value since the last display update. For
X example, runque shows the number of times a process was
X placed on the run queue. An exception is the memory and swap
X space fields: These numbers reflect absolute current
X utilization over the period shown in the "last XXXXX msec"
X value in the banner. Periods of 4000 milliseconds are shown
X in red, 1500 to 3990 milliseconds in blue and less than 1500
X milliseconds in the normal banner color.
X
X My guess as to the meaning of the sysinfo and minfo values is
X in the file EXPLAIN. I am not familiar with the meanings of
X all the items, having looked through the header files, sar
X man pages and the other UNIX hacker-ganda I could find.
X Comments are appreciated.
X
X4. If you run u386mon on a 43 line display, extra information is displayed
X on the bottom of the screen (from the struct var v, bootinfo
X and proc kernel databases).
X
X On a 24/25-line screen, the 'e' command accesses the Var/Bootinfo/
X Tune/Proc display, overlaying the Sysinfo/Minfo display.
X Using 'm' returns you to the main display.
X
X Bootinfo will be missing from version running on platforms which
X do not support it.
X
X5. On a color display, static numeric values, such as maxmem appear
X in blue (the same color as screen literals/labels). Dynamic
X numeric values are displayed in green, with the exception of
X total cpu and wait percentages, which appear in light green,
X red or yellow.
X
X6. An "INEXACT" indication on the top line means that u386mon was
X not scheduled quickly enough to capture accurate 1 second (nominal)
X values. Continued INEXACT indication suggests the x5 and x10
X second smoothed values are also wrong.
X
X An "INVALID" indication means u386mon was scheduled 3 or more
X seconds late; all percentage isplays are now suspect.
X
X7. IN GENERAL, if you see any red characters on the display,
X immediately take grain of salt. If you have no color screen
X and still see red, add tequila to salt.
X
X8. If you are running as root, you may use the -l switch or the
X 'l' command to lock u386mon into memory. If you do this, PLOCK
X will appear at the top of the screen to remind you of this hoggy
X behavior. The u386mon process will not be listed in a process
X status display since SSYS (locked, resident) processes are not
X shown.
X
X9. The ISC bootinfo field will have different information due to
X different porting by ISC and SCO.
X
XProcess Status Display
X======================
X
X1. Pressing 'p' causes a process status display of sorts to be
X shown, overlaying Sysinfo/Minfo on a 25 line screen or
X Var/Bootinfo/Tune/Proc on a 43 line screen. On a 43 line screen, 'P'
X causes a larger ps display to be shown, overlaying Sysinfo/Minfo and
X Var/Bootinfo/Tune/Proc.
X
X Sample output:
X
XS USER PID CPU PRI NI UCPU SCPU SIZE TTY CMD
Xs root 148 0 26 20 0:00 0:05 108 ?? /etc/cron
Xs wht 14946 2 39 20 0:02 0:11 224 05 TMR 01000a12
Xs wht 14947 2 39 20 0:02 0:11 220 05 TMR 01011101
Xs wht 14950 0 27 20 0:00 0:02 228 05 IP 01000a12
Xs wht 14951 1 27 20 0:00 0:02 224 05 IP 01011101
Xs wht 14952 0 27 20 0:01 0:02 228 05 TP4 01000a12
Xs wht 14953 1 27 20 0:01 0:03 224 05 TP4 01011101
Xs wht 14957 0 27 20 0:00 0:04 200 05 smpad.x
Xs wht 14960 1 27 20 0:00 0:04 204 05 mmpad.x
Xs root 15044 0 28 20 0:01 0:01 296 12 vi README
Xs uucp 15053 0 30 26 0:00 0:00 696 ?? /usr/lib/uucp/uusched
Xs uucp 15055 0 30 26 0:00 0:00 748 ?? UUCICO -r1 -sgatech
Xs uucp 15060 0 28 26 0:00 0:00 768 ?? dialTBIT tty2E 2222222UC 192
X
X NOTES
X a. S - two character status
X 1st character - process status
X s - sleeping
X R - ready to run (might be running if u386mon were not)
X z - zombie
X d - stopped by debugger
X i - idle (in creation?)
X p - running on processor (on single CPU systems, only u386mon
X will show this)
X x - XBREAK - process growing or shrinking
X 2nd character - process swap status
X S - process is swapped
X blank - process is in memory
X
X b. If the process is running with setuid, a '#' appears to
X the right of the username.
X
X c. On color systems, processes ready to run are shown in yellow
X unless they are ready, but swapped out, in which case they
X are shown in red.
X
X3. Since a limited space is available for displaying process
X status, particularly on a 25-line screen, a selective elimination
X algorithm is used to whittle the list when insufficient room
X is available. init (pid 1) and system/resident (SSYS)
X processes are never displayed. When a display cycle is to begin
X and there is not room for all of the processes to be shown,
X processes are eliminated in the following order:
X
X a. 'getty', 'uugetty', 'sh', 'csh', and 'ksh'
X b. swapped and zombie processes
X c. sleeping processes
X
X If there is still insufficient room, an indication to the effect
X is displayed (tough cookies).
X
X
XA $0.0002 tour: why nlsym and /unix.nlsym?
X==========================================
X
XAccess to kernel (/dev/kmem) and physical (/dev/mem) memory and
Xswap (/dev/swap) is required for u386mon to do its thing.
XTo find kmem addresses of interest, an nlist(S) call must be made
Xagainst /unix. This can be quite expensive.
X
XThe 'nlist' procedure is performed by a separate program (nlsym)
Xand the resulting nlist structure array is stored in /unix.nlsym.
Xu386mon thus may obtain nlist information rapidly without nlist(S) each
Xtime it is executed. Also stored in /unix.nlsym is a stat structure of
X/unix at the time of nlsym execution. A unique word is stored at the
Xend of the file in case /unix.nlsym's nlist structure is expanded for
Xother applications. The u386mon program reads /unix.nlsym by means
Xof facilities in libnlsym.c. If the stat structure in /unix.nlsym
Xdoes not match a dynamic stat of /unix or if the unique word does
Xnot match, the nlist information is not trusted and u386mon prompts
Xthe user to run (or have run) the nlsym program to update /unix.nlsym.
X
XMany symbols are nlist'ed by nlsym which are not used by u386mon.
XYou may find other uses for libnlsym/libkmem which make use of them.
X
XHow to get going
X================
X
X1. Copy Makefile.sco, Makefile.isc or Makefile.sVr31
X to Makefile, depending on your system. In Makefile.isc,
X you have to coose between ISC 1.x.x and 2.x.x. 1.x.x is
X not yet well supported.
X
X2. Edit Makefile to change BINDIR to match your local requirements.
X If you have a kernel that knows about MERGE386 as with SCO ODT,
X add -DMERGE386 to CFLAGS. Likewise, if you have VPIX, add -DVPIX.
X You may need to add -Dm68k for a MC68000 system if your
X compiler does not (This may sound like an odd statement for a
X program with 386 in the name, but we are broadening our territory :->).
X
X3. make all. Please report compile errors to me. You shouldn't
X get any on SCO 3.2.x or 2.x.x for any current versions
X (circa July, 1990).
X
X3a. Note: Don't worry, if on SCO makes, you see warnings on many modules'
X compilation similar to the following:
X
X cc -nointl -c -Octl -CSON -DLINT_ARGS u386mon.c
X u386mon.c
X /usr/include/tinfo.h(442) : warning C4005: 'box' : redefinition
X /usr/include/tinfo.h(443) : warning C4005: 'newterm' : redefinition
X
X This is confusion on part of tinfo.h resulting from our use of
X some valuable speedup macros built into tinfo.h, but not quite
X kosher enough to satisfy the compiler we know what we are doing.
X If it bothers you, or something breaks, remove #define CURSES_MACROS
X from u386mon's config.h.
X
X3b. If you get undefined externs for is_linetouched and is_wintouched(),
X you can try editing config.h and #define NO_ISTOUCH. Good luck -
X these are hack attempts and I have no idea if they will work.
X
X4. You must run make install as root since u386mon must be setuid to
X 'mem' ('sys' for ISC) and nlsym must produce /unix.nlsym.
X For S5R3.1 systems, all bets on "make install" are off. I don't
X know what it takes, it'll vary from system to system, and the
X Makefile.sVr31 is only a guide. For instance, you may want to
X rename the program to u68kmon on 68000 systems :-).
X
X5. Sources are in 4-spaced tab format (please don't flame :->).
X
X6. Under SCO, you may have to chgrp mem /dev/swap; I did. For some reason,
X I found the group name for /dev/swap on my system to be 'network'.
X I guess something may have been broken by my changing the group,
X but it hasn't bit me yet (now 2 months, but I don't have any EtherStuff).
X
X The ISC Makefile unconditionally sets g+r on /dev/swap, since this
X necessary permission is not ordinarily present.
X
X7. usage: u386mon [-l] [-p | -P]
X -l lock process into memory (if root)
X -p begin with short ps display
X -P begin with long ps display (if 43 line screen)
X
X8. If you are running SCO and get 4 as the size of most or all processes,
X try adding -DUSIZE_FIXED. SCO 3.2.0 had this info in the struct
X user fields u_tsize, u_dsize, u_ssize wrong, IMHO, and fixed it
X in ODT/3.2.1. See det_proc.c for more detail. Your port
X may/WILL vary.
X
X9. The renice program by Ford Ditto, from which the kmem routines
X came, with this release.
X
X usage: renice -# pid decrease nice by #
X renice +# pid increase nice by #
X renice =# pid set nice to #
X
X The traditional privileges for root and non-root are supported.
X
X10. The libpanel.c module is not an efficient replacement for the
X SVR3.2 panel facility. It is, however, fully featured and serves
X the needs of u386mon, assisting a port to SVR3.1. It seems
X efficient enough to use in lieu of native (vendor-supplied)
X panels.
X
XComments are appreciated, especially bug fixes and information
Xhelping to port the program to another 386 SVR3 system.
XSomebody was purported to be working on a XENIX/386 lookalike.
X
XNO FSF, LPF, FOO or LSD -- just free.
X
XWarren Tucker N4HGF
X{gatech,emory}!n4hgf!wht -or- wht@n4hgf.Mt-Park.GA.US
X
XMany thanks to:
Xaaron@odt.icom.com
Xalan@cms2
Xallbery@ncoast.org
Xandy@rbdc
Xbbt.se!pgd
Xcms2!alan
Xdionj@sco.com (double plus thanks)
Xdug@kd4nc
Xfocsys!larry
Xhowardl@wb3ffv.ampr.org
Xhppcmart!martin
Xjdc@uudell.dell.com
Xjonl@sco.com
Xlarry@focsys
Xmarlor@cup.portal.com
Xnba@sysware.sysware.dk
Xpat@rwing
Xrandy@chinet.chi.il
Xsoward@ms.uky.edu
Xsteen@kiku.dk
Xtrb@ima.ima.isc.com
Xradig.de!peter
Xwgs6386!budp
SHAR_EOF
$TOUCH -am 0810143890 README &&
chmod 0644 README ||
echo "restore of README failed"
Wc_c="`wc -c < README`"
test 18453 -eq "$Wc_c" ||
echo README: original size 18453, current size $Wc_c
# ============= EXPLAIN ==============
echo "x - extracting EXPLAIN (Text)"
sed 's/^X//' << 'SHAR_EOF' > EXPLAIN &&
XThis is a very cursor description of some of the fields as I understand
Xthem. Corrections/additions appreciated.
X
X---- Sysinfo/Minfo --- (last 1 second activity) --------------------------------
Xbread actual buffers (disk or tape blocks) read
Xbwrite actual buffers (disk or tape blocks) written
Xlread logical buffers (disk or tape blocks) read
Xlwrite logical buffers (disk or tape blocks) written
Xswapin logical blocks swapped in
Xswapout logical blocks swapped out
Xbswapin actual blocks swapped in
Xbswapout actual blocks swapped in
Xiget get inode
Xnamei lookup inode for pathname
Xdirblk directory blocks read
Xreadch chars read by read() system call
Xwritch chars written by write() system call
Xrawch raw tty character read
Xcanch raw tty character put onto canonical queue
Xoutch tty characters written
Xmsg message operations (msgsnd())
Xsema semaphore operations (semop())
Xpswitch process context switches
Xsyscall system calls
Xsysread read() calls
Xsyswrit write() calls
Xsysfork fork() calls
Xsysexec exec[,l,le,etc.]() calls
Xrunque number of processes placed on run queue
Xrunocc number of processes -now- on queue
Xswpque number of processes placed on swap queue
Xswpocc number of processes -now- on queue
Xvfault
Xdemand
Xpfault
Xsteal number of pages stolen
Xfrdpgs pages freed
Xvfpg
Xsfpg
Xvspg
Xsspg
Xpnpfault
Xwrtfault
SHAR_EOF
$TOUCH -am 0810051990 EXPLAIN &&
chmod 0644 EXPLAIN ||
echo "restore of EXPLAIN failed"
Wc_c="`wc -c < EXPLAIN`"
test 1393 -eq "$Wc_c" ||
echo EXPLAIN: original size 1393, current size $Wc_c
# ============= Makefile.sco ==============
echo "x - extracting Makefile.sco (Text)"
sed 's/^X//' << 'SHAR_EOF' > Makefile.sco &&
X#+-------------------------------------------------------------------
X# Makefile for u386mon for SCO UNIX V/386
X# ...!{gatech,emory}!n4hgf!wht
X#--------------------------------------------------------------------
X#+:EDITS:*/
X#:08-10-1990-14:12-jmd@p1so/wht@n4hgf-2.20-add Tandem Integrity S2
X#:08-07-1990-14:24-wht@n4hgf-nba@sysware.sysware.dk S5R31 updates
X#:08-02-1990-15:35-wht@n4hgf-2.12-old curses hacks+minor 3.2 formalizations
X#:08-01-1990-21:39-wht@n4hgf-add Dell make file
X#:08-01-1990-12:26-wht@n4hgf-2.11-try to support ISC 1.x.x
X#:07-28-1990-18:07-wht@n4hgf-2.10 release
X#:07-26-1990-02:55-wht@n4hgf-add -nointl -- smaller + we don't use it
X#:07-24-1990-18:53-wht@n4hgf-add USIZE_FIXED reminder
X#:07-21-1990-16:03-wht@n4hgf-add libpanel + remake depend
X#:06-30-1990-19:06-wht@n4hgf-run nlsym using full pathname
X#:06-27-1990-01:57-wht@n4hgf-1.10 - incorporate suggestions from alpha testers
X#:06-25-1990-04:14-wht@n4hgf-1.03-better error handling
X#:06-21-1990-14:27-r@n4hgf-version x0.12 seems bug free
X#:06-19-1990-21:37-wht@n4hgf-get ready for 0.08 release
X
X#------------> CFLAGS
X# Add -DVPIX if you have VP/ix
X# Add -DMERGE386 if you have Merge/386
X# Add -DUSIZE_FIXED if you get erroneous process sizes
XCFLAGS = -c -nointl -Octl -CSON -DLINT_ARGS
X
X#------------> LIB
XLIB = -lpanel -ltinfo -lx -lmalloc -lc_s
X
X#------------> KMEMGRP
XKMEMGRP = mem
X
X#------------> BINDIR
XBINDIR = /usr/local/bin
X
XLDFLAGS = -s -nointl
X
XVERSION = 2.20
X
X#handle Sys V make "feature" of using SHELL
XSHELL = /bin/sh
X
X#FCRC = fcrc -u $*.c ;
XFCRC = @echo ignore redefinition warnings for box and newterm;
X.c.o:; $(FCRC) $(CC) $(CFLAGS) $*.c
X
XSRC = \
X u386mon.c\
X bootinfo.c\
X detail.c\
X det_proc.c\
X det_sio.c\
X disputil.c\
X kludge.c\
X libkmem.c\
X libmem.c\
X libpanel.c\
X libswap.c\
X libnlsym.c\
X nlsym.c\
X proc.c\
X tune.c\
X var.c
X
XHDR = \
X config.h\
X libkmem.h\
X libmem.h\
X libpanel.h\
X libswap.h\
X libnlsym.h\
X lint_args.h\
X nlsym.h\
X u386mon.h
X
XNLSYM_OBJ =\
X nlsym.o
X
XU386MON_OBJ =\
X u386mon.o\
X detail.o\
X det_proc.o\
X det_sio.o\
X bootinfo.o\
X kludge.o\
X proc.o\
X tune.o\
X var.o\
X disputil.o\
X libkmem.o\
X libmem.o\
X libswap.o\
X libnlsym.o
X
XSHARFLS = \
X README\
X EXPLAIN\
X Makefile.sco\
X Makefile.isc1\
X Makefile.isc2\
X Makefile.dell\
X Makefile.s2\
X Makefile.sVr31\
X $(SRC)\
X $(HDR)\
X renice/Makefile\
X renice/renice.c\
X panel/README\
X panel/panel.3\
X panel/ptest.c\
X panel/Makefile
X
Xall: nlsym u386mon
X
X#must run as root
Xinstall: all
X cp nlsym $(BINDIR)
X chown bin $(BINDIR)/nlsym
X chgrp bin $(BINDIR)/nlsym
X chmod 711 $(BINDIR)/nlsym
X mv u386mon $(BINDIR)
X chown bin $(BINDIR)/u386mon
X chgrp $(KMEMGRP) $(BINDIR)/u386mon
X chmod 2711 $(BINDIR)/u386mon
X $(BINDIR)/nlsym
X @echo ' ';echo 'csh users rehash before executing'
X
Xnlsym: $(NLSYM_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(NLSYM_OBJ) $(LIB)
X
Xu386mon: $(U386MON_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(U386MON_OBJ) $(LIB)
X
X/unix.nlsym: nlsym /unix
X $(BINDIR)/nlsym
X chmod 644 /unix.nlsym
X
X#not delivered
Xsrc.fls: $(SRC) Makefile
X ls $(SRC) > src.fls
Xlint_args: src.fls
X echo ' ' > lint_args.h
X csh zgcc src.fls lint_args.h $(CFLAGS)
X
Xclean:
X rm -f $(U386MON_OBJ) $(NLSYM_OBJ) \
X core u386mon.lint Makefile.bak src.fls mkdep.* cscope.out tags a.out
X
Xclobber: clean
X rm -f nlsym u386mon
X
Xlint:
X lint -ux *.c > u386mon.lint
X
X#for shar 3.27 or later
Xshar:
X shar -a -n u386mon.$(VERSION) -l 55 -o $(VERSION).sh $(SHARFLS)
X
X# MAKE DEPEND: regenerate .c:.h, .ol:.c, .ol:.asm dependencies automatically
X#
Xdepend:
X rm -f mkdep.rule.tmp
X if test '$(SRC)' ;\
X then (grep '^#include' $(SRC) \
X | sed -e 's?:[^<]*<\([^>]*\)>.*?: /usr/include/\1?'\
X -e 's?:[^"]*"\([^"]*\)".*?: \1?'\
X -e 's?\(.*\)\.c?\1.o?'\
X >> mkdep.rule.tmp) ;\
X fi
X
X echo 1 >mkdep.ex.tmp
X echo '/^# DO NOT DELETE THIS LINE' >>mkdep.ex.tmp
X echo '.+1,$$d' >>mkdep.ex.tmp
X echo 'r mkdep.rule.tmp' >> mkdep.ex.tmp
X echo 'w' >> mkdep.ex.tmp
X cp Makefile.sco Makefile.new
X ex Makefile.new < mkdep.ex.tmp
X rm mkdep.ex.tmp mkdep.rule.tmp
X echo '# DEPENDENCIES MUST END AT END OF FILE' >>Makefile.new
X echo '# IF YOU PUT STUFF HERE IT WILL GO AWAY'>>Makefile.new
X echo '# see make depend above'>>Makefile.new
X mv Makefile.sco Makefile.bak
X mv Makefile.new Makefile.sco
X
X# DO NOT DELETE THIS LINE
Xu386mon.o: config.h
Xu386mon.o: /usr/include/curses.h
Xu386mon.o: libpanel.h
Xu386mon.o: /usr/include/signal.h
Xu386mon.o: /usr/include/string.h
Xu386mon.o: /usr/include/fcntl.h
Xu386mon.o: /usr/include/nlist.h
Xu386mon.o: /usr/include/errno.h
Xu386mon.o: /usr/include/time.h
Xu386mon.o: /usr/include/sys/types.h
Xu386mon.o: /usr/include/sys/lock.h
Xu386mon.o: /usr/include/sys/utsname.h
Xu386mon.o: /usr/include/sys/stat.h
Xu386mon.o: /usr/include/sys/param.h
Xu386mon.o: /usr/include/sys/tuneable.h
Xu386mon.o: /usr/include/sys/sysinfo.h
Xu386mon.o: /usr/include/sys/sysmacros.h
Xu386mon.o: /usr/include/sys/immu.h
Xu386mon.o: /usr/include/sys/region.h
Xu386mon.o: /usr/include/sys/proc.h
Xu386mon.o: /usr/include/sys/var.h
Xu386mon.o: /usr/include/sys/swap.h
Xu386mon.o: /usr/include/sys/trap.h
Xu386mon.o: nlsym.h
Xu386mon.o: libkmem.h
Xu386mon.o: libmem.h
Xu386mon.o: libswap.h
Xu386mon.o: libnlsym.h
Xu386mon.o: u386mon.h
Xbootinfo.o: config.h
Xbootinfo.o: /usr/include/curses.h
Xbootinfo.o: /usr/include/sys/types.h
Xbootinfo.o: /usr/include/sys/bootinfo.h
Xbootinfo.o: u386mon.h
Xdetail.o: config.h
Xdetail.o: /usr/include/curses.h
Xdetail.o: /usr/include/signal.h
Xdetail.o: /usr/include/string.h
Xdetail.o: /usr/include/fcntl.h
Xdetail.o: /usr/include/nlist.h
Xdetail.o: /usr/include/errno.h
Xdetail.o: /usr/include/time.h
Xdetail.o: /usr/include/pwd.h
Xdetail.o: /usr/include/sys/types.h
Xdetail.o: /usr/include/utmp.h
Xdetail.o: /usr/include/sys/utsname.h
Xdetail.o: /usr/include/sys/stat.h
Xdetail.o: /usr/include/sys/param.h
Xdetail.o: /usr/include/sys/tuneable.h
Xdetail.o: /usr/include/sys/sysinfo.h
Xdetail.o: /usr/include/sys/sysmacros.h
Xdetail.o: /usr/include/sys/immu.h
Xdetail.o: /usr/include/sys/region.h
Xdetail.o: /usr/include/sys/proc.h
Xdetail.o: /usr/include/sys/var.h
Xdetail.o: nlsym.h
Xdetail.o: libkmem.h
Xdetail.o: libnlsym.h
Xdetail.o: u386mon.h
Xdet_proc.o: config.h
Xdet_proc.o: /usr/include/curses.h
Xdet_proc.o: /usr/include/signal.h
Xdet_proc.o: /usr/include/string.h
Xdet_proc.o: /usr/include/fcntl.h
Xdet_proc.o: /usr/include/nlist.h
Xdet_proc.o: /usr/include/errno.h
Xdet_proc.o: /usr/include/time.h
Xdet_proc.o: /usr/include/pwd.h
Xdet_proc.o: /usr/include/sys/types.h
Xdet_proc.o: /usr/include/utmp.h
Xdet_proc.o: /usr/include/sys/stat.h
Xdet_proc.o: /usr/include/sys/param.h
Xdet_proc.o: /usr/include/sys/tuneable.h
Xdet_proc.o: /usr/include/sys/sysinfo.h
Xdet_proc.o: /usr/include/sys/sysmacros.h
Xdet_proc.o: /usr/include/sys/immu.h
Xdet_proc.o: /usr/include/sys/region.h
Xdet_proc.o: /usr/include/sys/proc.h
Xdet_proc.o: /usr/include/sys/fs/s5dir.h
Xdet_proc.o: /usr/include/sys/user.h
Xdet_proc.o: /usr/include/sys/var.h
Xdet_proc.o: nlsym.h
Xdet_proc.o: libkmem.h
Xdet_proc.o: libmem.h
Xdet_proc.o: libswap.h
Xdet_proc.o: libnlsym.h
Xdet_proc.o: u386mon.h
Xdet_sio.o: config.h
Xdet_sio.o: /usr/include/curses.h
Xdet_sio.o: /usr/include/string.h
Xdet_sio.o: /usr/include/nlist.h
Xdet_sio.o: /usr/include/sys/types.h
Xdet_sio.o: /usr/include/sys/stat.h
Xdet_sio.o: /usr/include/sys/ascii.h
Xdet_sio.o: /usr/include/sys/param.h
Xdet_sio.o: /usr/include/sys/tty.h
Xdet_sio.o: nlsym.h
Xdet_sio.o: libkmem.h
Xdet_sio.o: libmem.h
Xdet_sio.o: libswap.h
Xdet_sio.o: libnlsym.h
Xdet_sio.o: u386mon.h
Xdisputil.o: config.h
Xdisputil.o: /usr/include/curses.h
Xdisputil.o: /usr/include/sys/types.h
Xdisputil.o: u386mon.h
Xkludge.o: /usr/include/curses.h
Xlibkmem.o: /usr/include/sys/types.h
Xlibkmem.o: /usr/include/fcntl.h
Xlibkmem.o: libkmem.h
Xlibmem.o: /usr/include/sys/types.h
Xlibmem.o: /usr/include/fcntl.h
Xlibmem.o: libmem.h
Xlibpanel.o: config.h
Xlibpanel.o: /usr/include/curses.h
Xlibpanel.o: u386mon.h
Xlibswap.o: /usr/include/sys/types.h
Xlibswap.o: /usr/include/fcntl.h
Xlibswap.o: libswap.h
Xlibnlsym.o: config.h
Xlibnlsym.o: /usr/include/stdio.h
Xlibnlsym.o: /usr/include/sys/types.h
Xlibnlsym.o: /usr/include/sys/stat.h
Xlibnlsym.o: /usr/include/fcntl.h
Xlibnlsym.o: /usr/include/nlist.h
Xlibnlsym.o: nlsym.h
Xlibnlsym.o: libnlsym.h
Xnlsym.o: config.h
Xnlsym.o: /usr/include/stdio.h
Xnlsym.o: /usr/include/sys/types.h
Xnlsym.o: /usr/include/sys/stat.h
Xnlsym.o: /usr/include/fcntl.h
Xnlsym.o: /usr/include/nlist.h
Xnlsym.o: nlsym.h
Xproc.o: config.h
Xproc.o: /usr/include/curses.h
Xproc.o: /usr/include/sys/types.h
Xproc.o: /usr/include/sys/param.h
Xproc.o: /usr/include/sys/immu.h
Xproc.o: /usr/include/sys/region.h
Xproc.o: /usr/include/sys/proc.h
Xproc.o: /usr/include/sys/var.h
Xproc.o: /usr/include/nlist.h
Xproc.o: nlsym.h
Xproc.o: libkmem.h
Xproc.o: libnlsym.h
Xproc.o: u386mon.h
Xtune.o: config.h
Xtune.o: /usr/include/curses.h
Xtune.o: /usr/include/sys/types.h
Xtune.o: /usr/include/sys/tuneable.h
Xtune.o: u386mon.h
Xvar.o: config.h
Xvar.o: /usr/include/curses.h
Xvar.o: /usr/include/sys/types.h
Xvar.o: /usr/include/sys/var.h
Xvar.o: u386mon.h
X# DEPENDENCIES MUST END AT END OF FILE
X# IF YOU PUT STUFF HERE IT WILL GO AWAY
X# see make depend above
SHAR_EOF
$TOUCH -am 0810141890 Makefile.sco &&
chmod 0644 Makefile.sco ||
echo "restore of Makefile.sco failed"
Wc_c="`wc -c < Makefile.sco`"
test 8960 -eq "$Wc_c" ||
echo Makefile.sco: original size 8960, current size $Wc_c
# ============= Makefile.isc1 ==============
echo "x - extracting Makefile.isc1 (Text)"
sed 's/^X//' << 'SHAR_EOF' > Makefile.isc1 &&
X#+-------------------------------------------------------------------
X# Makefile for u386mon for ISC 386/ix 1.0.x - a good guess
X# ...!{gatech,emory}!n4hgf!wht
X#--------------------------------------------------------------------
X#+:EDITS:*/
X#:08-10-1990-14:12-jmd@p1so/wht@n4hgf-2.20-add Tandem Integrity S2
X#:08-07-1990-14:24-wht@n4hgf-nba@sysware.sysware.dk S5R31 updates
X#:08-03-1990-03:42-wht@n4hgf-creation
X
X#------------> CFLAGS
XCFLAGS = -c -O -DISC_1
X
X#------------> LIB
XLIB = -lcurses -lx -lmalloc -lc_s
X
X#------------> KMEMGRP
XKMEMGRP = sys
X
X#------------> BINDIR
XBINDIR = /usr/local/bin
X
XLDFLAGS = -s
X
XVERSION = 2.20
X
X#handle Sys V make "feature" of using SHELL
XSHELL = /bin/sh
X
X#FCRC = fcrc -u $*.c ;
X.c.o:; $(FCRC) $(CC) $(CFLAGS) $*.c
X
XSRC = \
X u386mon.c\
X bootinfo.c\
X detail.c\
X det_proc.c\
X det_sio.c\
X disputil.c\
X libkmem.c\
X libmem.c\
X libpanel.c\
X libswap.c\
X libnlsym.c\
X kludge.c\
X nlsym.c\
X proc.c\
X tune.c\
X var.c
X
XHDR = \
X config.h\
X libkmem.h\
X libmem.h\
X libpanel.h\
X libswap.h\
X libnlsym.h\
X lint_args.h\
X nlsym.h\
X u386mon.h
X
XNLSYM_OBJ =\
X nlsym.o
X
XU386MON_OBJ =\
X u386mon.o\
X detail.o\
X det_proc.o\
X bootinfo.o\
X proc.o\
X tune.o\
X var.o\
X disputil.o\
X kludge.o\
X libkmem.o\
X libmem.o\
X libpanel.o\
X libswap.o\
X libnlsym.o
X
XSHARFLS = \
X README\
X EXPLAIN\
X Makefile.sco\
X Makefile.isc1\
X Makefile.isc2\
X Makefile.dell\
X Makefile.s2\
X Makefile.sVr31\
X $(SRC)\
X $(HDR)\
X renice/Makefile\
X renice/renice.c\
X panel/README\
X panel/panel.3\
X panel/ptest.c\
X panel/Makefile
X
Xall: nlsym u386mon
X
X#must run as root
Xinstall: all
X mv $(BINDIR)/nlsym $(BINDIR)/nlsym.old
X cp nlsym $(BINDIR)
X chown bin $(BINDIR)/nlsym
X chgrp bin $(BINDIR)/nlsym
X chmod 711 $(BINDIR)/nlsym
X mv $(BINDIR)/u386mon $(BINDIR)/u386mon.old
X cp u386mon $(BINDIR)
X chown bin $(BINDIR)/u386mon
X chgrp $(KMEMGRP) $(BINDIR)/u386mon
X chmod 2711 $(BINDIR)/u386mon
X chmod g+r /dev/swap
X $(BINDIR)/nlsym
X @echo ' ';echo 'csh users rehash before executing'
X
Xnlsym: $(NLSYM_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(NLSYM_OBJ) $(LIB)
X
Xu386mon: $(U386MON_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(U386MON_OBJ) $(LIB)
X
X/unix.nlsym: nlsym /unix
X $(BINDIR)/nlsym
X chmod 644 /unix.nlsym
X
X#not delivered
Xsrc.fls: $(SRC) Makefile
X ls $(SRC) > src.fls
Xlint_args: src.fls
X echo ' ' > lint_args.h
X csh zgcc src.fls lint_args.h $(CFLAGS)
X
Xclean:
X rm -f $(U386MON_OBJ) $(NLSYM_OBJ) \
X core u386mon.lint Makefile.bak src.fls mkdep.* cscope.out tags a.out
X
Xclobber: clean
X rm -f nlsym u386mon
X
Xlint:
X lint -ux *.c > u386mon.lint
X
X#for shar 3.27 or later
Xshar:
X shar -a -n u386mon.$(VERSION) -l 55 -o $(VERSION).sh $(SHARFLS)
X
X# MAKE DEPEND: regenerate .c:.h, .ol:.c, .ol:.asm dependencies automatically
X#
Xdepend:
X rm -f mkdep.rule.tmp
X if test '$(SRC)' ;\
X then (grep '^#include' $(SRC) \
X | sed -e 's?:[^<]*<\([^>]*\)>.*?: /usr/include/\1?'\
X -e 's?:[^"]*"\([^"]*\)".*?: \1?'\
X -e 's?\(.*\)\.c?\1.o?'\
X >> mkdep.rule.tmp) ;\
X fi
X
X echo 1 >mkdep.ex.tmp
X echo '/^# DO NOT DELETE THIS LINE' >>mkdep.ex.tmp
X echo '.+1,$$d' >>mkdep.ex.tmp
X echo 'r mkdep.rule.tmp' >> mkdep.ex.tmp
X echo 'w' >> mkdep.ex.tmp
X cp Makefile.isc1 Makefile.new
X ex Makefile.new < mkdep.ex.tmp
X rm mkdep.ex.tmp mkdep.rule.tmp
X echo '# DEPENDENCIES MUST END AT END OF FILE' >>Makefile.new
X echo '# IF YOU PUT STUFF HERE IT WILL GO AWAY'>>Makefile.new
X echo '# see make depend above'>>Makefile.new
X mv Makefile.isc1 Makefile.bak
X mv Makefile.new Makefile.isc1
X
X# DO NOT DELETE THIS LINE
Xu386mon.o: config.h
Xu386mon.o: /usr/include/curses.h
Xu386mon.o: libpanel.h
Xu386mon.o: /usr/include/signal.h
Xu386mon.o: /usr/include/string.h
Xu386mon.o: /usr/include/fcntl.h
Xu386mon.o: /usr/include/nlist.h
Xu386mon.o: /usr/include/errno.h
Xu386mon.o: /usr/include/time.h
Xu386mon.o: /usr/include/sys/types.h
Xu386mon.o: /usr/include/sys/lock.h
Xu386mon.o: /usr/include/sys/utsname.h
Xu386mon.o: /usr/include/sys/stat.h
Xu386mon.o: /usr/include/sys/param.h
Xu386mon.o: /usr/include/sys/tuneable.h
Xu386mon.o: /usr/include/sys/sysinfo.h
Xu386mon.o: /usr/include/sys/sysmacros.h
Xu386mon.o: /usr/include/sys/immu.h
Xu386mon.o: /usr/include/sys/region.h
Xu386mon.o: /usr/include/sys/proc.h
Xu386mon.o: /usr/include/sys/var.h
Xu386mon.o: /usr/include/sys/swap.h
Xu386mon.o: /usr/include/sys/trap.h
Xu386mon.o: nlsym.h
Xu386mon.o: libkmem.h
Xu386mon.o: libmem.h
Xu386mon.o: libswap.h
Xu386mon.o: libnlsym.h
Xu386mon.o: u386mon.h
Xbootinfo.o: config.h
Xbootinfo.o: /usr/include/curses.h
Xbootinfo.o: /usr/include/sys/types.h
Xbootinfo.o: /usr/include/sys/bootinfo.h
Xbootinfo.o: u386mon.h
Xdetail.o: config.h
Xdetail.o: /usr/include/curses.h
Xdetail.o: /usr/include/signal.h
Xdetail.o: /usr/include/string.h
Xdetail.o: /usr/include/fcntl.h
Xdetail.o: /usr/include/nlist.h
Xdetail.o: /usr/include/errno.h
Xdetail.o: /usr/include/time.h
Xdetail.o: /usr/include/pwd.h
Xdetail.o: /usr/include/sys/types.h
Xdetail.o: /usr/include/utmp.h
Xdetail.o: /usr/include/sys/utsname.h
Xdetail.o: /usr/include/sys/stat.h
Xdetail.o: /usr/include/sys/param.h
Xdetail.o: /usr/include/sys/tuneable.h
Xdetail.o: /usr/include/sys/sysinfo.h
Xdetail.o: /usr/include/sys/sysmacros.h
Xdetail.o: /usr/include/sys/immu.h
Xdetail.o: /usr/include/sys/region.h
Xdetail.o: /usr/include/sys/proc.h
Xdetail.o: /usr/include/sys/var.h
Xdetail.o: nlsym.h
Xdetail.o: libkmem.h
Xdetail.o: libnlsym.h
Xdetail.o: u386mon.h
Xdet_proc.o: config.h
Xdet_proc.o: /usr/include/curses.h
Xdet_proc.o: /usr/include/signal.h
Xdet_proc.o: /usr/include/string.h
Xdet_proc.o: /usr/include/fcntl.h
Xdet_proc.o: /usr/include/nlist.h
Xdet_proc.o: /usr/include/errno.h
Xdet_proc.o: /usr/include/time.h
Xdet_proc.o: /usr/include/pwd.h
Xdet_proc.o: /usr/include/sys/types.h
Xdet_proc.o: /usr/include/utmp.h
Xdet_proc.o: /usr/include/sys/stat.h
Xdet_proc.o: /usr/include/sys/param.h
Xdet_proc.o: /usr/include/sys/tuneable.h
Xdet_proc.o: /usr/include/sys/sysinfo.h
Xdet_proc.o: /usr/include/sys/sysmacros.h
Xdet_proc.o: /usr/include/sys/immu.h
Xdet_proc.o: /usr/include/sys/region.h
Xdet_proc.o: /usr/include/sys/proc.h
Xdet_proc.o: /usr/include/sys/fs/s5dir.h
Xdet_proc.o: /usr/include/sys/user.h
Xdet_proc.o: /usr/include/sys/var.h
Xdet_proc.o: nlsym.h
Xdet_proc.o: libkmem.h
Xdet_proc.o: libmem.h
Xdet_proc.o: libswap.h
Xdet_proc.o: libnlsym.h
Xdet_proc.o: u386mon.h
Xdet_sio.o: config.h
Xdet_sio.o: /usr/include/curses.h
Xdet_sio.o: /usr/include/string.h
Xdet_sio.o: /usr/include/nlist.h
Xdet_sio.o: /usr/include/sys/types.h
Xdet_sio.o: /usr/include/sys/stat.h
Xdet_sio.o: /usr/include/sys/ascii.h
Xdet_sio.o: /usr/include/sys/param.h
Xdet_sio.o: /usr/include/sys/tty.h
Xdet_sio.o: nlsym.h
Xdet_sio.o: libkmem.h
Xdet_sio.o: libmem.h
Xdet_sio.o: libswap.h
Xdet_sio.o: libnlsym.h
Xdet_sio.o: u386mon.h
Xdisputil.o: config.h
Xdisputil.o: /usr/include/curses.h
Xdisputil.o: /usr/include/sys/types.h
Xdisputil.o: u386mon.h
Xlibkmem.o: /usr/include/sys/types.h
Xlibkmem.o: /usr/include/fcntl.h
Xlibkmem.o: libkmem.h
Xlibmem.o: /usr/include/sys/types.h
Xlibmem.o: /usr/include/fcntl.h
Xlibmem.o: libmem.h
Xlibpanel.o: config.h
Xlibpanel.o: /usr/include/curses.h
Xlibpanel.o: u386mon.h
Xlibswap.o: /usr/include/sys/types.h
Xlibswap.o: /usr/include/fcntl.h
Xlibswap.o: libswap.h
Xlibnlsym.o: config.h
Xlibnlsym.o: /usr/include/stdio.h
Xlibnlsym.o: /usr/include/sys/types.h
Xlibnlsym.o: /usr/include/sys/stat.h
Xlibnlsym.o: /usr/include/fcntl.h
Xlibnlsym.o: /usr/include/nlist.h
Xlibnlsym.o: nlsym.h
Xlibnlsym.o: libnlsym.h
Xkludge.o: /usr/include/curses.h
Xnlsym.o: config.h
Xnlsym.o: /usr/include/stdio.h
Xnlsym.o: /usr/include/sys/types.h
Xnlsym.o: /usr/include/sys/stat.h
Xnlsym.o: /usr/include/fcntl.h
Xnlsym.o: /usr/include/nlist.h
Xnlsym.o: nlsym.h
Xproc.o: config.h
Xproc.o: /usr/include/curses.h
Xproc.o: /usr/include/sys/types.h
Xproc.o: /usr/include/sys/param.h
Xproc.o: /usr/include/sys/immu.h
Xproc.o: /usr/include/sys/region.h
Xproc.o: /usr/include/sys/proc.h
Xproc.o: /usr/include/sys/var.h
Xproc.o: /usr/include/nlist.h
Xproc.o: nlsym.h
Xproc.o: libkmem.h
Xproc.o: libnlsym.h
Xproc.o: u386mon.h
Xtune.o: config.h
Xtune.o: /usr/include/curses.h
Xtune.o: /usr/include/sys/types.h
Xtune.o: /usr/include/sys/tuneable.h
Xtune.o: u386mon.h
Xvar.o: config.h
Xvar.o: /usr/include/curses.h
Xvar.o: /usr/include/sys/types.h
Xvar.o: /usr/include/sys/var.h
Xvar.o: u386mon.h
X# DEPENDENCIES MUST END AT END OF FILE
X# IF YOU PUT STUFF HERE IT WILL GO AWAY
X# see make depend above
SHAR_EOF
$TOUCH -am 0810141890 Makefile.isc1 &&
chmod 0644 Makefile.isc1 ||
echo "restore of Makefile.isc1 failed"
Wc_c="`wc -c < Makefile.isc1`"
test 8187 -eq "$Wc_c" ||
echo Makefile.isc1: original size 8187, current size $Wc_c
# ============= Makefile.isc2 ==============
echo "x - extracting Makefile.isc2 (Text)"
sed 's/^X//' << 'SHAR_EOF' > Makefile.isc2 &&
X#+-------------------------------------------------------------------
X# Makefile for u386mon for ISC 386/ix 2.x.x
X# ...!{gatech,emory}!n4hgf!wht
X#--------------------------------------------------------------------
X#+:EDITS:*/
X#:08-10-1990-14:12-jmd@p1so/wht@n4hgf-2.20-add Tandem Integrity S2
X#:08-07-1990-14:24-wht@n4hgf-nba@sysware.sysware.dk S5R31 updates
X#:08-03-1990-03:45-wht@n4hgf-rename Makefile.isc1 to Makefile.isc2
X#:08-02-1990-15:35-wht@n4hgf-2.12-old curses hacks+minor 3.2 formalizations
X#:08-01-1990-21:39-wht@n4hgf-add Dell make file
X#:08-01-1990-12:26-wht@n4hgf-2.11-try to support ISC 1.x.x
X#:07-28-1990-18:07-wht@n4hgf-2.10 release
X#:07-26-1990-18:59-root@n4hgf-remove inappropriate USIZE_FIXED reminder
X#:07-24-1990-18:53-wht@n4hgf-add USIZE_FIXED reminder
X#:07-21-1990-16:03-wht@n4hgf-add libpanel + remake depend
X#:06-27-1990-01:57-wht@n4hgf-1.10 - incorporate suggestions from alpha testers
X#:06-25-1990-04:14-wht@n4hgf-1.03-better error handling
X#:06-24-1990-20:53-wht@n4hgf-v1.01-add ISC support thanks to peter@radig.de
X#:06-21-1990-14:27-r@n4hgf-version x0.12 seems bug free
X#:06-19-1990-21:37-wht@n4hgf-get ready for 0.08 release
X
X#------------> CFLAGS
X# ISC 2.0.x
X# Add -DVPIX if you have VP/ix
X# Add -DMERGE386 if you have Merge/386
XCFLAGS = -c -O -DISC
X
X#------------> LIB
XLIB = -lpanel -lcurses -lx -lmalloc -lc_s
X
X#------------> KMEMGRP
XKMEMGRP = sys
X
X#------------> BINDIR
XBINDIR = /usr/local/bin
X
XLDFLAGS = -s
X
XVERSION = 2.20
X
X#handle Sys V make "feature" of using SHELL
XSHELL = /bin/sh
X
X#FCRC = fcrc -u $*.c ;
X.c.o:; $(FCRC) $(CC) $(CFLAGS) $*.c
X
XSRC = \
X u386mon.c\
X bootinfo.c\
X detail.c\
X det_proc.c\
X det_sio.c\
X disputil.c\
X kludge.c\
X libkmem.c\
X libmem.c\
X libpanel.c\
X libswap.c\
X libnlsym.c\
X nlsym.c\
X proc.c\
X tune.c\
X var.c
X
XHDR = \
X config.h\
X libkmem.h\
X libmem.h\
X libpanel.h\
X libswap.h\
X libnlsym.h\
X lint_args.h\
X nlsym.h\
X u386mon.h
X
XNLSYM_OBJ =\
X nlsym.o
X
XU386MON_OBJ =\
X u386mon.o\
X detail.o\
X det_proc.o\
X bootinfo.o\
X proc.o\
X tune.o\
X var.o\
X disputil.o\
X kludge.o\
X libkmem.o\
X libmem.o\
X libswap.o\
X libnlsym.o
X
XSHARFLS = \
X README\
X EXPLAIN\
X Makefile.sco\
X Makefile.isc1\
X Makefile.isc2\
X Makefile.dell\
X Makefile.s2\
X Makefile.sVr31\
X $(SRC)\
X $(HDR)\
X renice/Makefile\
X renice/renice.c\
X panel/README\
X panel/panel.3\
X panel/ptest.c\
X panel/Makefile
X
Xall: nlsym u386mon
X
X#must run as root
Xinstall: all
X mv $(BINDIR)/nlsym $(BINDIR)/nlsym.old
X cp nlsym $(BINDIR)
X chown bin $(BINDIR)/nlsym
X chgrp bin $(BINDIR)/nlsym
X chmod 711 $(BINDIR)/nlsym
X mv $(BINDIR)/u386mon $(BINDIR)/u386mon.old
X cp u386mon $(BINDIR)
X chown bin $(BINDIR)/u386mon
X chgrp $(KMEMGRP) $(BINDIR)/u386mon
X chmod 2711 $(BINDIR)/u386mon
X chmod g+r /dev/swap
X $(BINDIR)/nlsym
X @echo ' ';echo 'csh users rehash before executing'
X
Xnlsym: $(NLSYM_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(NLSYM_OBJ) $(LIB)
X
Xu386mon: $(U386MON_OBJ)
X $(CC) $(LDFLAGS) -o $@ $(U386MON_OBJ) $(LIB)
X
X/unix.nlsym: nlsym /unix
X $(BINDIR)/nlsym
X chmod 644 /unix.nlsym
X
X#not delivered
Xsrc.fls: $(SRC) Makefile
X ls $(SRC) > src.fls
Xlint_args: src.fls
X echo ' ' > lint_args.h
X csh zgcc src.fls lint_args.h $(CFLAGS)
X
Xclean:
X rm -f $(U386MON_OBJ) $(NLSYM_OBJ) \
X core u386mon.lint Makefile.bak src.fls mkdep.* cscope.out tags a.out
X
Xclobber: clean
X rm -f nlsym u386mon
X
Xlint:
X lint -ux *.c > u386mon.lint
X
X#for shar 3.27 or later
Xshar:
X shar -a -n u386mon.$(VERSION) -l 55 -o $(VERSION).sh $(SHARFLS)
X
X# MAKE DEPEND: regenerate .c:.h, .ol:.c, .ol:.asm dependencies automatically
X#
Xdepend:
X rm -f mkdep.rule.tmp
X if test '$(SRC)' ;\
X then (grep '^#include' $(SRC) \
X | sed -e 's?:[^<]*<\([^>]*\)>.*?: /usr/include/\1?'\
X -e 's?:[^"]*"\([^"]*\)".*?: \1?'\
X -e 's?\(.*\)\.c?\1.o?'\
X >> mkdep.rule.tmp) ;\
X fi
X
X echo 1 >mkdep.ex.tmp
X echo '/^# DO NOT DELETE THIS LINE' >>mkdep.ex.tmp
X echo '.+1,$$d' >>mkdep.ex.tmp
X echo 'r mkdep.rule.tmp' >> mkdep.ex.tmp
X echo 'w' >> mkdep.ex.tmp
X cp Makefile.isc2 Makefile.new
X ex Makefile.new < mkdep.ex.tmp
X rm mkdep.ex.tmp mkdep.rule.tmp
X echo '# DEPENDENCIES MUST END AT END OF FILE' >>Makefile.new
X echo '# IF YOU PUT STUFF HERE IT WILL GO AWAY'>>Makefile.new
X echo '# see make depend above'>>Makefile.new
X mv Makefile.isc2 Makefile.bak
X mv Makefile.new Makefile.isc2
X
X# DO NOT DELETE THIS LINE
Xu386mon.o: config.h
Xu386mon.o: /usr/include/curses.h
Xu386mon.o: libpanel.h
Xu386mon.o: /usr/include/signal.h
Xu386mon.o: /usr/include/string.h
Xu386mon.o: /usr/include/fcntl.h
Xu386mon.o: /usr/include/nlist.h
Xu386mon.o: /usr/include/errno.h
Xu386mon.o: /usr/include/time.h
Xu386mon.o: /usr/include/sys/types.h
Xu386mon.o: /usr/include/sys/lock.h
Xu386mon.o: /usr/include/sys/utsname.h
Xu386mon.o: /usr/include/sys/stat.h
Xu386mon.o: /usr/include/sys/param.h
Xu386mon.o: /usr/include/sys/tuneable.h
Xu386mon.o: /usr/include/sys/sysinfo.h
Xu386mon.o: /usr/include/sys/sysmacros.h
Xu386mon.o: /usr/include/sys/immu.h
Xu386mon.o: /usr/include/sys/region.h
Xu386mon.o: /usr/include/sys/proc.h
Xu386mon.o: /usr/include/sys/var.h
Xu386mon.o: /usr/include/sys/swap.h
Xu386mon.o: /usr/include/sys/trap.h
Xu386mon.o: nlsym.h
Xu386mon.o: libkmem.h
Xu386mon.o: libmem.h
Xu386mon.o: libswap.h
Xu386mon.o: libnlsym.h
Xu386mon.o: u386mon.h
Xbootinfo.o: config.h
Xbootinfo.o: /usr/include/curses.h
Xbootinfo.o: /usr/include/sys/types.h
Xbootinfo.o: /usr/include/sys/bootinfo.h
Xbootinfo.o: u386mon.h
Xdetail.o: config.h
Xdetail.o: /usr/include/curses.h
Xdetail.o: /usr/include/signal.h
Xdetail.o: /usr/include/string.h
Xdetail.o: /usr/include/fcntl.h
Xdetail.o: /usr/include/nlist.h
Xdetail.o: /usr/include/errno.h
Xdetail.o: /usr/include/time.h
Xdetail.o: /usr/include/pwd.h
Xdetail.o: /usr/include/sys/types.h
Xdetail.o: /usr/include/utmp.h
Xdetail.o: /usr/include/sys/utsname.h
Xdetail.o: /usr/include/sys/stat.h
Xdetail.o: /usr/include/sys/param.h
Xdetail.o: /usr/include/sys/tuneable.h
Xdetail.o: /usr/include/sys/sysinfo.h
Xdetail.o: /usr/include/sys/sysmacros.h
Xdetail.o: /usr/include/sys/immu.h
Xdetail.o: /usr/include/sys/region.h
Xdetail.o: /usr/include/sys/proc.h
Xdetail.o: /usr/include/sys/var.h
Xdetail.o: nlsym.h
Xdetail.o: libkmem.h
Xdetail.o: libnlsym.h
Xdetail.o: u386mon.h
Xdet_proc.o: config.h
Xdet_proc.o: /usr/include/curses.h
Xdet_proc.o: /usr/include/signal.h
Xdet_proc.o: /usr/include/string.h
Xdet_proc.o: /usr/include/fcntl.h
Xdet_proc.o: /usr/include/nlist.h
Xdet_proc.o: /usr/include/errno.h
Xdet_proc.o: /usr/include/time.h
Xdet_proc.o: /usr/include/pwd.h
Xdet_proc.o: /usr/include/sys/types.h
Xdet_proc.o: /usr/include/utmp.h
Xdet_proc.o: /usr/include/sys/stat.h
Xdet_proc.o: /usr/include/sys/param.h
Xdet_proc.o: /usr/include/sys/tuneable.h
Xdet_proc.o: /usr/include/sys/sysinfo.h
Xdet_proc.o: /usr/include/sys/sysmacros.h
Xdet_proc.o: /usr/include/sys/immu.h
Xdet_proc.o: /usr/include/sys/region.h
Xdet_proc.o: /usr/include/sys/proc.h
Xdet_proc.o: /usr/include/sys/fs/s5dir.h
Xdet_proc.o: /usr/include/sys/user.h
Xdet_proc.o: /usr/include/sys/var.h
Xdet_proc.o: nlsym.h
Xdet_proc.o: libkmem.h
Xdet_proc.o: libmem.h
Xdet_proc.o: libswap.h
Xdet_proc.o: libnlsym.h
Xdet_proc.o: u386mon.h
Xdet_sio.o: config.h
Xdet_sio.o: /usr/include/curses.h
Xdet_sio.o: /usr/include/string.h
Xdet_sio.o: /usr/include/nlist.h
Xdet_sio.o: /usr/include/sys/types.h
Xdet_sio.o: /usr/include/sys/stat.h
Xdet_sio.o: /usr/include/sys/ascii.h
Xdet_sio.o: /usr/include/sys/param.h
Xdet_sio.o: /usr/include/sys/tty.h
Xdet_sio.o: nlsym.h
Xdet_sio.o: libkmem.h
Xdet_sio.o: libmem.h
Xdet_sio.o: libswap.h
Xdet_sio.o: libnlsym.h
Xdet_sio.o: u386mon.h
Xdisputil.o: config.h
Xdisputil.o: /usr/include/curses.h
Xdisputil.o: /usr/include/sys/types.h
Xdisputil.o: u386mon.h
Xkludge.o: /usr/include/curses.h
Xlibkmem.o: /usr/include/sys/types.h
Xlibkmem.o: /usr/include/fcntl.h
Xlibkmem.o: libkmem.h
Xlibmem.o: /usr/include/sys/types.h
Xlibmem.o: /usr/include/fcntl.h
Xlibmem.o: libmem.h
Xlibpanel.o: config.h
Xlibpanel.o: /usr/include/curses.h
Xlibpanel.o: u386mon.h
Xlibswap.o: /usr/include/sys/types.h
Xlibswap.o: /usr/include/fcntl.h
Xlibswap.o: libswap.h
Xlibnlsym.o: config.h
Xlibnlsym.o: /usr/include/stdio.h
Xlibnlsym.o: /usr/include/sys/types.h
Xlibnlsym.o: /usr/include/sys/stat.h
Xlibnlsym.o: /usr/include/fcntl.h
Xlibnlsym.o: /usr/include/nlist.h
Xlibnlsym.o: nlsym.h
Xlibnlsym.o: libnlsym.h
Xnlsym.o: config.h
Xnlsym.o: /usr/include/stdio.h
Xnlsym.o: /usr/include/sys/types.h
Xnlsym.o: /usr/include/sys/stat.h
Xnlsym.o: /usr/include/fcntl.h
Xnlsym.o: /usr/include/nlist.h
Xnlsym.o: nlsym.h
Xproc.o: config.h
Xproc.o: /usr/include/curses.h
Xproc.o: /usr/include/sys/types.h
Xproc.o: /usr/include/sys/param.h
Xproc.o: /usr/include/sys/immu.h
Xproc.o: /usr/include/sys/region.h
Xproc.o: /usr/include/sys/proc.h
Xproc.o: /usr/include/sys/var.h
Xproc.o: /usr/include/nlist.h
Xproc.o: nlsym.h
Xproc.o: libkmem.h
Xproc.o: libnlsym.h
Xproc.o: u386mon.h
Xtune.o: config.h
Xtune.o: /usr/include/curses.h
Xtune.o: /usr/include/sys/types.h
Xtune.o: /usr/include/sys/tuneable.h
Xtune.o: u386mon.h
Xvar.o: config.h
Xvar.o: /usr/include/curses.h
Xvar.o: /usr/include/sys/types.h
Xvar.o: /usr/include/sys/var.h
Xvar.o: u386mon.h
X# DEPENDENCIES MUST END AT END OF FILE
X# IF YOU PUT STUFF HERE IT WILL GO AWAY
X# see make depend above
SHAR_EOF
$TOUCH -am 0810141890 Makefile.isc2 &&
chmod 0644 Makefile.isc2 ||
echo "restore of Makefile.isc2 failed"
Wc_c="`wc -c < Makefile.isc2`"
test 9008 -eq "$Wc_c" ||
echo Makefile.isc2: original size 9008, current size $Wc_c
true || echo "restore of Makefile.isc2 failed"
echo "End of part 1, continue with part 2"
exit 0