ferencz@cwsys3.cwru.Edu (Don Ferencz) (09/16/88)
Hello again. A short while back I posted a question pertaining to the "broadcast address" of my particular TCP/IP version - Wollongong's Enhanced WIN3B running on three AT&T 3B2/310's. I asked if anyone knew why all of my attempts to change the broadcast address from a sockets application (with the SIOCIFGBRDADDR ioctl) were failing with EINVAL. Well, many people pointed out what should have been painfully obvious: that version of TCP/IP is based on BSD4.2 Sockets, which does not support a change of broadcast address! However, the #define for SIOCIFGBRDADDR appears in the header file <ioctl.h>!!! My thanks to all who responded, and my condolances to those who had wished to do the same thing I did. =========================================================================== | Don Ferencz | "All the world's indeed a stage\ | | ferencz@cwsys3.cwru.EDU | And we are merely players\ | | Dept of Systems Engineering | Performers and portrayers" | | Case Wetsren Reserve University | -- Rush | ===========================================================================