crhills@wateng.UUCP (Chris Hills) (03/11/86)
Chris Hills
280 Phillip St.
Box No. A1-134
Waterloo,Ontario
Canada N2L 3X1
(519) 886-8129
To whom it may concern,
I am seeking a position in Semiconductors(Integrated Circuits),
Marketing,Sales or any other discipline in Australia, New Zealand,
Europe or any other area of the world where these opportunities
exist. I am interested in securing a position abroad with an
American or Canadian based company or with a firm abroad. The
position could be either a permanent or temporary position for
any time duration. I am also interested in these types of posit-
ions in North America.
As of this time I plan to leave Canada in June or July to teach
English in Japan for five to six months. I plan to be in Australia
in October for interviews. If you are interested in my qualifications
and would like to interview me, I can alter my travel plans if an
interview outside North America is necessary. Please contact me
so arrangements can be made. I am flexible. I will have my visas
for Japan,Australia and New Zealand.
I have a diploma in Electronic Technology and a degree in Electrical
Engineering. I have three and one half years of relevant work
experience including employment at Bell-Northern Research and
Northern Telecom which are among the leading telecommunications
companies in Canada. I am fluent in English and have a good working
knowledge of French.
I have included my resume and a semiconductor experience outline
below which summarize my qualifications. I would appreciate any
information regarding other persons who may be interested in my
qualifications in marketing/sales as well as integrated circuit
and device design. My current address and phone number are given
above.
I am looking forward to your reply.
RESUME
Present Address Home Address
280 Phillip St. Box No. A1-134 Box 1109,R.R.#3
Waterloo,Ontario,Canada N2L 3X1 Bathurst,N.B.,Canada E2A 4G8
(519) 886-8129 (506) 548-2711
Date of Birth April 23,1960
EDUCATION
Sept. 1981 to Candidate for B.A.Sc.,ELECTRICAL EMGINEERING,
April 1986 UNIVERSITY OF WATERLOO.
Sept. 1978 to DIPLOMA OF ENGINEERING TECHNOLOGY IN ELECTRONICS,
May 1980 New Brunswick Community College,Saint John. Graduated
second. Designed a large process control unit using
a PDP 11 computer.
Silicon Technology Northern Telecom, Ottawa,Ontario,Canada.
Innovation Engineer
Research/Design experience gained in:
o Programming EPROM's using ultraviolet light.
o Characterization of new EPROM cells.
o Program/Erase circuitry for EPROM cells.
o CAD layout of 1.5 micron CMOS technology cells.
o Writing technical reports.
High Speed communi- Bell-Northern Research Ltd.,Ottawa,Ontario,Canada.
cations Engineer.
Research/Design experience gained in:
o Eighty Megabit fiber optic receiver for optical
waveguides.
o Optical power measurement instrument.
o Phase modulation of semiconductor lasers.
o High Speed(500) Mhz analog and ECL layout techniques.
Fiber Optic Bell-Northern Research Ltd.,Ottawa,Canada.
Engineer
Research/Design experience gained in:
o Fiber optic splice alignment instrument.
o Semiconductor laser feedback circuitry.
o Low signal level optical detection and very high gain
circuitry.
o Noise reduction circuitry and techniques.
Microcomputer Computer Systems Group.,University of Waterloo,Canada.
Engineer
Design experience gained in:
o Computerized flip disk score board.
o Power supply under voltage alarm circuitry.
o Composite video mixing.
o Analog,digital and video circuit design.
Teletext Hardware Norpak Ltd.,Kanata,Ontario,Canada.
Engineer
Design experience gained in:
o Circuitry to overlay computer graphics on video.
o Telidon teletext decoder circuitry.
o Video graphics generation circuitry.
o Video,analog,digital and microprocessor circuitry.
o Hardware test software (6809 assembler).
o Supervisory role between engineering and drafting.
Electronic Bailey Meter Ltd.,Burlington,Ontario,Canada.
Technologist
Experience gained in:
o Designing voltage monitoring circuitry for large data
logging systems.
o Calibration of analog to digital converters.
o Writing test procedure manuals and training personnel.
o Repairing data logging system circuit boards.
SEMICONDUCTOR EXPERIENCE
Northern Telecom
o Discovery of method of programming EPROM's using ultraviolet light.
o Characterization of new types of EPROM cells using HP semiconductor analyser
under computer control.
o Design of program/erase circuitry to stress oxide of new EPROM cells.
o Temperature stressing of EPROM cells.
o EPROM leakage current characteristics.
o Study of charge pumping effects.
o Study of surface charge density effects on transistor noise.
o CAD layout of 1.5 micron gate width CMOS Dynamic Ram cells.
o Writing of technical reports on these subjects.
Bell-Northern Research
o Study of light spectrum of single mode semiconductor laser.
o Use of circuit simulation programs.
Novel MOSFET photodetector Project
o Characterization of subthreshold current,threshold voltage,transfer
characteristics and source and drain leakage currents using HP semiconductor
analyser. Calculation of device threshold voltage using device dimensions
and doping levels of short channel MOSFET devices. Two dimensional
simulation of MOSFET device.
MOS Inverter Project
o Study of MOS inverters with resistive and enhancement loads comparing
theoretical,experimental and simulated results for DC transfer and transient
characteristics(semiconductor analyser used).
ECL polysilicon emitter cell design and extensive device simulation.
o Design of transistor using theoretical equations and design rules.
o Mask layout on layout editor.
o Use of fabrication process simulator(SUPREM II).
o Bipolar device simulation(BIPOLE) and CAD model generation.
o Comparison of analytical and simulated device parameters based on
device dimensions and doping profiles.
CMOS Macrocell Design
o Design of CMOS 4 bit full adder.
o Simulation of adder using SILOS logic simulator.
o Simulation of adder circuitry using SPICE circuit simulator.
o Symbolic layout of adder.
Previous school term average 80%
Related Course material
Taking design courses in TTL,ECL,JFET,MESFET,MOSFET,IIL,STL and CMOS cell
design.
Chris Hills
280 Phillip St.
Box No. A1-134
Waterloo,Ontario
Canada N2L 3X1
(519) 886-8129