XBR4DB26@DDATHD21.BITNET (OLAF THUN) (09/21/88)
We have a problem during filetransfer from VAX to Apollo using the FTP-Command "msend". Our hard- and softwareconfiguration: VAX 8530 (VMS 4.6, CMU_TCP 6.2) MICROVAX (CMU_TCP 6.2) Apollo DN3000 (Aegis 9.7, TCP/IP 3.1) Everytime we start a filetransfer from the VAX 8530 or the MicroVAX to the Apollo with the command "msend /struc=file /type=ascii /noprompt *.*" (about 80 files, each file 1-100 blocks, only ASCII-character) FTP is aborted after 20-30 files with the following error: -IPACP-E-CSE- Connection table space exhausted If we use the FTp-Command "mget" from the Apollo the filetransfer stops after about 55 files. If we start at this time "tcpstat" in another window there is a connection with the TCP STATE = CLOSE-WAIT to the VAX-Node. After about a minute the TCP STATE of this connection becomes "????". The only to abort the ftp-session is to use ^Q. The filetransfer in the other direction (Apollo->VAX) works without errors. If there are only a few (1..10) even large (up to 6000 blocks) files they are transferes without problems. Can anybody help us? Thanks Olaf Thun Technische Hochschule Darmstadt Institut fuer Elektrische Energieversorgung Schlossgraben 1 6100 Darmstadt West-Germany Bitnet: XBR4DB26@DDATHD21.Bitnet