eln191v@monu1.cc.monash.oz (mr dj grimm) (11/30/88)
A simple question that I think I already know the answer to: I have been given some disks that have the instructions $wd //node_name $rbak -dev F -F1 -all -L -ms I presume that these are all AEGIS commands that are liable to disappear with the upgrade to sr10. If this is not the case can some one please inform me how to get the info off the disk once we have upgraded to sr10. If I get no reply I will have to see about putting them on the system before we upgrade and recover them from the back up tape. Also does anyone know anything about MAC APOLLO? ( the disks that i am referring to above are for it but I have been given no documentation ). Thanks , Daniel Grimm eln191v@monu3.oz -- Daniel Grimm, Dept. of Elec. & Comp. Sys. Engineering, eln191v@monu1.oz Monash University, Clayton, Victoria 3168, Australia. Ph. (03) 565 3479 FAX (+61) 3 565 3409
krowitz@RICHTER.MIT.EDU (David Krowitz) (12/09/88)
WBAK/RBAK are still available at SR10 as is the AEGIS shell (/com/sh). You should have no problem reading the floppies under SR10. MAC APOLLO was a project at the University of Michigan (I think) which attempted to write a terminal emulator for the Macintosh and an SIO login handler for the Apollo which would allow a person on a Mac to log into an Apollo, run graphics programs on the Apollo, and see the output on their Mac. The version of the program I got (some time ago) didn't work very well. It's my understanding that the project was cancelled. -- David Krowitz krowitz@richter.mit.edu (18.83.0.109) krowitz%richter@eddie.mit.edu krowitz%richter@athena.mit.edu krowitz%richter.mit.edu@mitvma.bitnet (in order of decreasing preference)