[comp.sys.apollo] screendumps on an apple laserwriter

cs_iob@ux63.bath.ac.uk (O'Brien) (02/03/89)

Can anyone give me any pointers on this problem:

Printing off screendumps from our (monochrome, 19inch) DN3000's
on our Apple LaserWriter always results in the bottom edge being
"clipped" or "trimmed" so about 10 or 15 pixels that would be on
the left hand side of the screen are not shown on the paper. It's
not actually running off the edge of the paper, there is a margin
of white. The screendumps are done with the code:

	/com/cpscr /tmp/scrdump
	/com/prf -pr lw2 -magn 2 -plot -bw /tmp/scrdump

Where printer lw2 is the laserwriter in question. Talking to Apollo
has resulted in the suggestion that we change the print length (or
print width) but this only affected the text files being printed - 
no effect was noticable on the graphics prints.

We're running AEGIS-DOMAIN/IX SR9.7 

Ian