horne@cs.utexas.edu (Patrick J. Horne) (03/15/90)
I have a set of media for SR9.6 that seem to have some damaged disks included. The FLP8_A_DN460_DSP160 (rev 8) disk and FLP8_C (rev 8) disk both say that the volume needs salvol. When you run salvol it goes ahead and mounts the disk as it should, but the next time you use the disks the same message comes up. Neither disk is write protected. The other problem is with the first mentioned disk (I think). When booting Aegis from floppy the system almost gets the level 2 shell up, but hangs just before you get the ")" prompt. I would guess that this means that there is a damaged copy of aegis on the disk. Does anyone have a spare copy of these disk that I could borrow for a short time? Would there be a problem with the imbeded serial numbers not matching the rest of the disks? Any help would be greatly appreciated. Thanks in advance Pat -- --- Pat Horne CS Dept, Network Manager/Shop Supervisor (512)471-9517 Univ of Texas, Austin TX 78712 UUCP:cs.utexas.edu!horne