jfc@soleil.UUCP (Joe Cicchiello) (08/22/90)
I have a Dn3000 that I just removed the 85mb disk from and installed a 170mb disk. Question is I set the controller jumpers to the way stated in the jumper utility, but when I turned the node on I get self test failed instead
krowitz@RICHTER.MIT.EDU (David Krowitz) (08/22/90)
Have you checked that the jumpers on the disk drive's logic board are also set correctly? The "jumper" program will show you both the controller board (beware: there are a couple of different versions of the Ompti controller) and the disk drive logic boards. Also check that the drive has the ESDI cable terminators installed. -- David Krowitz krowitz@richter.mit.edu (18.83.0.109) krowitz%richter.mit.edu@eddie.mit.edu krowitz%richter.mit.edu@mitvma.bitnet (in order of decreasing preference)