spear_r@apollo.HP.COM (Robert Spear) (08/31/90)
Older dn550's used the st506 interface and you had the choice of a disk/tape or dual disk configuration. If you e-mail me with the type of disk you have to install, I will give you the jumper setting for the controller board and the disk drive. Try to get one of the following disks: Micropolis 1304, Micropolis 1325, Vertex v185, or the Maxtor xt-2190. You must get a drive of the same capacity as the primary drive. You will also need another disk mounting bracket, screws, interface cable # 3577 and disk control cable # 3090. The power cable harness is already in the mass storage unit.