lin@sixmile.INEL.GOV (Linn Hower) (01/24/91)
I am having trouble driving an Apple Laserwriter 2ntx from my DN10000
with SR10.3, configured for BSD, through lpd. It works great for short files,
but no pages past the header are produced for longer files. It appears to be
a flow control problem, since if I lower the BAUD, the job is printed normally.
It just takes sooo long.
Does anyone have this combination running... or any suggestions? Here
is my printcap entry:
lw|lp|1002|p1002|ps|postscript|PostScript|LaserWriter ][NTX:\
:lp=/dev/tty01:sd=/usr/spool/lpd/lw:\
:lf=/usr/spool/lpd/lw/log:af=/dev/null:\
:br#4800:fc#0177474:fs#0000303:xc#0137737:xs#0040040:mx#0:sf:\
:if=/usr/local/bin/psif:\
:of=/usr/local/bin/psof:
--
Linn Hower lin@INEL.GOV Phone: 208-526-9231
at the Idaho National Engineering Laboratory, Idaho Falls, ID
========== long legal disclaimer follows, press n to skip ===========
Neither the United States Government or the Idaho National Engineering
Laboratory or any of their employees, makes any warranty, whatsoever,
implied, or assumes any legal liability or responsibility regarding any
information, disclosed, or represents that its use would not infringe
privately owned rights. No specific reference constitutes or implies
endorsement, recommendation, or favoring by the United States
Government or the Idaho National Engineering Laboratory. The views and
opinions expressed herein do not necessarily reflect those of the
United States Government or the Idaho National Engineering Laboratory,
and shall not be used for advertising or product endorsement purposes.