snh@eastek.oz (Sebastien Hadjifotis) (01/20/91)
Is it possible to have more than one centronix port on the HP 400s workstation? thanx in advance, Sebastien. -- +-------------------------------------------------------------+ | Sebastien Hadjifotis Manager - Research and Development | | Eastek Limited. | | 476 St. Kilda Road, Melbourne, Victoria 3004, AUSTRALIA. | | | | ACSnet : snh@eastek.oz | | UUCP : uunet!eastek.oz.au!snh | | Phone : +61 3 866 2566 Fax: +61 3 820 9440 | +-------------------------------------------------------------+
simon@plunger.HP.COM (Simon Momber) (02/07/91)
In future I'm keeping out of the notes business. I double checked with R&D in Chelmsford, looks like they're not prepared to support SPE on 400 Domain/OS platforms. PSK7 and PSK8 dont include any enhancements for SPE 2.1 or later. The reason I doubled checked this was because of GPIO. GPIO v10.3.1 will provide support for the EISA bus on 4xxxs machines equipped with the optional EISA bus adapter card. Also, GPIO 10.3.1 requires PSK8 for writing EISA bus drivers. GPIO should be shipped around March 1991, unsure about PSK8 distribution. Sorry about all the confusion. Good Bye from Down Under... Simon Momber _ Hewlett-Packard Australia ___ _- Phone: +61 3 895 2560 _- . -__-.- ARPA: simon@hparc0.HP.COM __--. . . . . .- UUCP: ...!hpausla!hpuarca!simon - . Australasian. - ACSnet: simon@hpuarca.hp.oz - . . .Response . . - DESK: Simon Momber /HP9061/RG -. . . .Centre . . ._ Snail: 31-41 Joseph St, -_ ._------_ . . ._ Blackburn, VIC 3130, -- -_. _- AUSTRALIA. -- -