jms@cs.vu.nl (Jan-Mark) (04/01/91)
Hello *, After cleaning my LaserJet+ it'll only give me error 50. The manual states: 50 This error number indicates a fusing assembly malfunction. The printer cannot immediately recover from this type of error. Switch the printer OFF (0) and wait a minimum of 10 minutes; then switch the printer power ON (I) and resume printing. If the FORM FEED light was on at the time the error occurred, resend the data to the printer. When ever I switch it on, it performs a self test. The display shows 05 and all the lights are on. Then all the lights go off and some later the 05 goes to 00 and immediately on to 02. This is normal. But after only 1 second of 02 it goes into error state 50. The 50 blinks. If I switch it OFF and ON without waiting the 10 minutes. It goes straight from 00 to 50, ie. no 02 for a second. As you might expect I would like to be able to print again. Since my machine isn't on a service contract or sorts, I would like to have all the help I can get. If you ever had this problem or a similar problem or if you think you can help me, or if you have some other advice, please let me know. I would be very grateful. Regards Jan-Mark Wams -- (:> jms (_) ========""======