rsalz@bbn.com (Rich Salz) (04/06/88)
Submitted-by: Joe Dellinger <joe@hanauma.STANFORD.EDU>
Posting-number: Volume 14, Issue 23
Archive-name: vplot/part18
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of archive 18 (of 24)."
# Wrapped by rsalz@fig.bbn.com on Fri Mar 25 11:47:29 1988
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'Vplot_Kernel/Documentation/pen.mn' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Vplot_Kernel/Documentation/pen.mn'\"
else
echo shar: Extracting \"'Vplot_Kernel/Documentation/pen.mn'\" \(17675 characters\)
sed "s/^X//" >'Vplot_Kernel/Documentation/pen.mn' <<'END_OF_FILE'
X.TH Pen 9 "April 6 1986"
X.SH NAME
pen \- VPLOT graphics output filters for all devices
X.PP
X.SH SYNOPSIS
pen plot_file1 [plot_file2 ...] [options]
X.PP
Seplib version: Pen < Plot1.h [Plot2.h ...] [options]
X.PP
X.SH DESCRIPTION
Pen filters accept input in the
X.B vplot(9)
graphical metalanguage
and translate it into code for any of about 20
graphics output devices
including graphics terminals, laser printers, electrostatic plotters,
and dot-matrix line printers.
Interactive input
X(mouse, cursor keys, keyboard) is not yet supported.
X.PP
The output of a
X.B pen
filter can be sent to a plot device
or saved as a file of device-language commands.
If the output is not redirected it is understood
that you want to plot on the standard output device.
X.PP
There are now many different
X.B pen
filters for different devices.
These programs differ only in the device-dependent output routines.
They share a common
X.B vplot
interpreter,
and most filters make use of common intermediate-level code.
This manual entry
describes those options that are implemented in the device independent part
and thus are common to all pen filters.
X.PP
X.SH DEVICES SUPPORTED
Well supported devices: Imagen, Tektronix 410x, Envision, DEC Regis,
Rastertech, Printronix.
X.PP
Partially supported devices: PostScript, Tektronix 401x,
XXWindows, SunView, Sun NeWS, Masscomp (GPS), HPGL.
X.PP
Virtual devices: raspen (generic raster device), vppen (generic vplot
device)
X.PP
X.SH OPTIONS
X.PP
Pen has many options.
Though many of these are included mostly for backward
compatibility with older versions of
X.B vplot,
they also add quite a lot of flexibility to the system.
X.PP
Those options for which the default is device- or host-dependent
are marked with an `X', since the default varies from machine to machine
or device to device.
X.PP
All options have the form
X.B a=b,
where
X.B `a'
is the name of the option being set and
X.B `b'
is the value it is being set to.
Alternatively, commonly used sets of options may be listed in a parameter file
and
X.B par=parameter_file_name
can be put as an option on the command line.
The last occurrence of any given option on the command line
is the one that is used (see also
X.B man getpar.
X)
The form
X.B a=
has the effect of causing the option
X.B a
to be unset.
X.TP
X.B in=string (numvplot=0 in1=string1 in2=string2 ...)
X.B String
is an input file containing vplot-format plot commands.
The
X.B `in='
is optional;
any text on the command line which doesn't contain an `=' is assumed
to be an input file.
The standard input is also read.
It is valid to have inputs in all three of these forms at the same time;
they will be read in order.
This is not quite the same as concatenating the files and then
processing the result,
as the clipping window, fatness, current color number,
text justification mode, text font, text precision, text overlay
mode, and plot style
get reset to the default at the start of each new input file (and at
the start of each frame within a file).
X(Non-sep filter versions only:
X.B numvplot=0
controls how many extra input file specifications of the form
X.B inX=stringX,
where X runs from 1 to numvplot, will be searched for.)
X.TP
X.B wstype=
Some pen filters may support several related, but not identical, devices.
This variable allows you to tell the pen filter the exact device type
that you are using. The work station type
variable can also be set via the environment variable WSTYPE. The
command line takes precedence. Normally the presence of any options
on the command line inhibits self-documentation. The
X.B wstype
option, if alone on the command line, will not.
X.TP
X.B hshift=0, vshift=0
This is an amount to translate the plot, in inches, in the horizontal and
vertical directions, respectively.
This is independent of all other scaling and origin setting.
These are useful when including graphics into a paper via TeX.
The program
X.B vppen
X(a special sort of pen filter) can be used to calculate
an appropriate hshift and vshift.
X.TP
X.B xcenter= ycenter=
If specified, the coordinate given (in inches)
is forced to be in the middle of
your screen.
In combination with the
X.B interact
option, this allows you to zoom in on an interesting part of your plot
without having it zoom off the screen.
This is independent of everything except translation (hshift and vshift).
X.TP
X.B pause=0
Number of seconds to wait in between plots. -1 means to prompt and stop and
wait for a carriage return before continuing.
X.TP
X.B fat=0
Base line thickness. Add this fatness to all vectors drawn.
Fatnesses are measured in units of 1/200'th of an
inch. A fatness of 1 or 2 may very well have no effect on a low resolution
device, but it will on a high resolution one.
X.B Fat
scales as does fatmult.
X.TP
X.B fatmult=1.
Fatness multiplication factor. This is mainly useful when you want to turn
off fatness for speed of plotting. This option can also be set via the
environment variable FATMULT.
X.TP
X.B patternmult=1.
Pattern multplication factor. This multiplies the size of patterns inside
polygons, both bit patterns and hatch patterns. Like FATMULT, can be set
via an environmental variable PATTERNMULT.
X.TP
X.B scale=1. xscale=1. yscale=1. txscale=1. mkscale=1. dashscale=1.
Amounts by which to stretch the plot.
X.B Scale
stretches both axes equally,
X.B xscale
XX only, and
X.B yscale
Y only. Again, this is vplot's X and Y, not
necessarily the screen's if the plot has been rotated.
Fatnesses, patterns, dashed line pattern lengths,
and marker sizes do NOT scale geometrically along with the rest of the plot.
Patterns and dashed line lengths do not scale at all
except by their own special scaling options given below.
Markers, text fatnesses, and vector fatnesses scale with screen size and with the
X.B scale
option, but not with
X.B xscale
and
X.B yscale.
Special scaling options that control specific things are
X.B txscale,
which scales only text size;
X.B mkscale,
which scales only markers;
X.B dashscale,
which scales only dashed line patterns;
X.B fatmult,
which scales all fatnesses; and
X.B patternmult,
which scales only patterns.
X.TP
X.B shade=y overlay=y
These options can be used to control shading of polygons.
If shading is turned off, the interior is not filled.
X(`A' style polygons normally do not have any outline. If
X.B shade=n,
one will be drawn so that you can still see where the polygon is.)
For devices that support polygons filled with patterns, the overlay
option sets the default overlay mode: n = replace, y = overlay. This can be
reset during plotting by the
X.B overlay
command in vplot. The difference
between these two options is whether color zero is treated as transparent
or not. This option also applies to raster.
X.TP
X.B style=standard
This option sets the default coordinate system. (It is overridden if
the coordinate system for the frame is set by the VP_SETSTYLE command in
the vplot file.)
X.B style=rotated
sets the origin in the upper left corner of
the plot with y horizontal and x positive downwards.
X.B style=standard
sets the origin in the lower left corner of the plot
with y vertical and x horizontal.
X.B style=absolute
is the same as
X.B standard
but with `size=absolute' implied as well.
Other possibilities are `old' and `mazama', both obsolete standards.
This option can be set using the environment variable PLOTSTYLE.
X.TP
X.B txfont=X txprec=X txovly=0 font?=
Default text font, text precision, and text overlay mode.
Alternate font file.
These are described in more detail in vplottext(9).
X.TP
X.B window=y frame=n xwmin= xwmax= ywmin= ywmax=
X.B Window=n
turns off all clipping windows
X(except that of the edge of the screen).
This is useful if you have accidentally
clipped your plot away to nothing, and can't figure out what's going wrong.
X.B Frame=y
shows you where your windows are, by
outlining them in white. (The first window should always
simply frame the screen, but often one side or another is clipped by
the device because the device's coordinates are off by one.)
X.B xwmin, xwmax, ywmin, ywmax
allow you to specify a global
clipping window in addition to any specified in the Vplot. The window's
position is given in vplot units of inches. (The 4 corners of the
window specified will be translated into device coordinates, and the
smallest rectangle with sides perpendicular to the edge of the screen
containing these 4 points will be used as a global clipping window.)
Together with concatenation of vplot files and hshift and vshift,
this gives a primitive sort of cut and paste capability.
X.TP
X.B rotate=0
Global rotation of entire plot by this many degrees clockwise, about the
origin.
Vshifts and/or hshifts may be needed to keep the plot from rotating off the
screen.
Since clipping windows must be standard up-down left-right rectangles,
they cannot rotate correctly except to multiples of 90 degrees.
The smallest clipping window that is possible that contains the desired
clipping window will be used in this case.
X.TP
X.B erase=y break=n
X.B Erase=y
forces an erase at the start of each input file, and follows the vplot
literally thereafter.
X.B Erase=literal
does not force an erase at the start.
X.B Erase=n
ignores ALL erases.
X.B Erase=once
forces one erase at the start of
plotting and thereafter ignores all erases.
These options are especially useful when combining several vplot files.
X``Forcing an erase at the start'' creates an erase as the very first thing
in the input plot file, but only if the plot file didn't already start with one.
X.B Break=n
treats the Vplot `break' command as a chance to pause, but not to erase.
X.B Break=y
makes `break' and `erase' synonymous.
X.TP
X.B size=X
X.B size=relative
scales the plot workspace, a 10.240-inch square, to fit the size of the screen.
X.B size=absolute
scales to real inches.
Hardcopy devices usually default to
X.B size=absolute,
screen devices default to
X.B size=relative.
X.TP
X.B echo=X
Echoing is typically turned off for the duration of plotting for most (but
not all) pen filters.
X.B echo=y
forces echoing to be left on, and
X.B echo=n
forces it to be turned off in case the default picked by the pen filter
is inappropriate.
X.TP
X.B endpause=X
Some filters by default pause at the end of plotting (usually with a beep)
and wait for a carriage return.
This is so you can see the last
frame of the plot before the text is turned back on, obliterating it.
For some devices this is not necessary, and there is no default
pause at the end.
Should the default not be appropriate (for example when plotting from within
a shell repeatedly),
X.B endpause=y
or
X.B endpause=n
can be used to force this `end pause' on or off.
X.TP
X.B mono=n
If
X.B mono=y,
the plot will come out in black and white,
possibly speeding up the plotting and allowing the use of
such monochrome features as dithering and halftoning on color screen devices.
X.TP
X.B dither=X
For
X.B mono=y
X(monochrome devices), dithering is a means of representing a
continuous-tone grey image.
See the manual page for vplot raster for a discussion of dithering
methods. If
X.B dither=0,
no special treatment will be given to raster colors. (This means that
all the points in the raster image will be shaded except those with color 0.)
Available dithering methods are:
X.br
X 1 Random Dither
X.br
X 2 Ordered Dither
X.br
X 3 Minimized Average Error Method
X.br
X 4 Digital Halftoning Method
X.TP
X.B greyc=1.
This parameter applies only when using dithering (described above) to
plot grey rasters on a monochrome device. It has been observed that grey
scale reproduction on hardcopy devices is quite different than that on
graphics displays. Briefly, the transition from black to white occurs more
rapidly on a display device, leaving both ends of the grey scale clipped
at black or white. This nonlinearity in the perceived grey scale is a useful
feature that can be simulated on a hardcopy device by use of the
X.B greyc
parameter. Greyc values less than 1. alter the grey scale to simulate this
nonlinearity. The smaller the greyc value, the more rapidly the transition
from black to white occurs. See the vplot raster manual page for a more
complete discussion of this parameter and how to use it.
X.TP
X.B pixc=1.
This parameter also applies only when using dithering to plot grey rasters
on monochrome devices. It has been noted that grey rasters come out
significantly darker than expected on a hardcopy device than when they
are displayed on a graphics screen. This parameter applies a correction
based on the assumption that this darkening is due to the overlap of
pixels on the hardcopy device. Pixc values less than 1. shift the grey
color scale toward white to compensate for the darkening due to pixel
overlap. See the vplot raster manual page for a more complete discussion
of this parameter and how to use it.
X.TP
X.B invras=y
Color 0 is the background color on all devices. For monochrome paper plotters,
this is usually WHITE, the color of the paper. On these devices
color 7 (WHITE) comes out as BLACK since it has to be the opposite of
color 0. If
X.B invras=y,
this convention is reversed for the purposes of dithered raster,
so that color 0 is black and color 7 is white despite the fact that
this color scheme is the reverse of that used for vectors on the same
plot.
X.TP
X.B wantras=y
If
X.B wantras=n,
all raster data will be displayed as a solid white block.
This shows where the raster data is, but on most devices will plot significantly
faster. This allows you to get the general layout of your plot right without
having to wait hours for the raster data to plot on your screen.
X.TP
X.B interact=
If
X.B interact=file_name
is specified, at the end of each plot the cursor will
be turned on and you may pick points around the screen. The Vplot coordinates
of these points will be stored into the file
X.B file_name.
Picking the far upper-right hand corner of the screen will
end the picking. (The may also be device-dependent ways to end the picking,
such as hitting Escape or q.)
Many of the pen options are specified in Vplot coordinates, in inches.
This option allows you to find the coordinates of specific points of
interest. It is a primitive sort of interaction, but useful.
X.TP
X.B selfdoc=n
If all else fails,
X.B selfdoc=y
will force pen to self document no matter what it thinks it should do.
X(This applies to the non-SEP version only.)
X.TP
X.B signal=
If the
X.B signal
option is set to anything, then no signal catching will be done. Useful
for debugging.
X.SH SEE ALSO
Vppen, Ipen, Vplot, Libvplot, Vplottext, Vplotraster, Vplothacker
X.SH AUTHOR
The original filter was
X.B pen,
X written
by Rob Clayton, who also invented
X.B vplot.
Originally it was only possible to do vectors and that on only one device.
Vplot has since been expanded beyond recognition, and is supported on
about 20 devices.
Michel Debiche, Glenn Kroeger, Chuck Karish, Steve Cole, and especially
Joe Dellinger have all worked on Vplot at one time or another.
X
This documentation was written by Joe Dellinger.
X.SH COPYRIGHT
Please read the official Vplot copyright notice, which is contained
in the Vplot manual page.
X.SH BUGS
X.PP
Text fatnesses scaling with ``scale'' is a recent addition for GKS
compatibility (there's no provision for changing the fatness of a font
in GKS). If you scale the entire plot up a lot, you probably would also
want to scale up the fatnesses of all your vectors too. But this would
doubly fatten your text! Probably there should be some way to control
the fatness of text independent from the global fatmult. The real
debate, in GKS lingo, is whether line fatness is a geometric attribute.
I take the philosophy that it is not. This is why I don't have fatnesses
automatically scaling with size, and why a special provision for
fattening large text more than small text had to be put in. Perhaps
I am wrong, and fat lines should be considered two dimensional.
X
There are a few ``magic numbers'' referred to in this documentation.
These are defined in ``vplot.h'', and are subject to change.
X
Vplot was never intended to be used in an interactive way, but does OK
for hard-copy purposes. It would be nice if someone out there took
Vplot apart and rebuilt it again in an interactive framework, using
a standardized meta-language. (We did not use a standard meta-language
because none existed at the time Vplot was started, circa late 70's.
Since then Vplot has slowly grown, for the most part staying backwards
compatible.)
X
Pen has a huge number of options supporting
backwards compatibility, and would need twice
as many to make absolutely everyone happy. Most of the completely
arcane ones have finally died a merciful death.
X
Not all devices support all the
primitives, but at least the software capability exists.
Several generic software routines inside `pen' should be redone when
possible, as I was just learning C when I wrote them. They seem to work
reliably, however. We use vplot a lot and haven't seen bugs in the
device-independent code in a long time now. Bugs in device-dependent
code is another story. (There is a tendency for people to only support
a device to the extent that it does what they themselves need, which
creates problems when someone else comes along and tries to do something
else with it.)
X
Why are we still using inches? Everything should be
changed to centimeters! (Except that, strangely enough, every device we
have here has a screen resolution that is defined by the manufacturer
in terms of pixels per
INCH! So how serious is the US on standardizing with the rest of the world
anyway?)
X
Bona-fide bugs that I know about but haven't bothered to fix are listed in
the file `known_bugs'. There are also such files in device subdirectories
where appropriate.
END_OF_FILE
if test 17675 -ne `wc -c <'Vplot_Kernel/Documentation/pen.mn'`; then
echo shar: \"'Vplot_Kernel/Documentation/pen.mn'\" unpacked with wrong size!
fi
# end of 'Vplot_Kernel/Documentation/pen.mn'
fi
if test -f 'Vplot_Kernel/filters/Tests/DEMO_Tectonics' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/Tests/DEMO_Tectonics'\"
else
echo shar: Extracting \"'Vplot_Kernel/filters/Tests/DEMO_Tectonics'\" \(16062 characters\)
sed "s/^X//" >'Vplot_Kernel/filters/Tests/DEMO_Tectonics' <<'END_OF_FILE'
X#plas: Vplot units used in this file
e
S o
C 21 0 127 220
C 22 78 189 249
C 23 149 232 253
C 24 206 253 232
C 25 242 249 189
C 26 254 220 127
C 27 242 170 53
C 28 206 103 26
C 29 149 26 103
C 30 78 53 170
C 41 255 127 127
C 42 242 189 53
C 43 206 232 26
C 44 149 253 103
C 45 78 249 170
C 46 0 220 220
C 47 78 170 249
C 48 149 103 253
C 49 206 26 232
C 50 242 53 189
C 94 230 230 230
C 92 200 200 200
C 93 180 180 180
C 91 150 150 150
C 10 255 255 255
C 11 0 100 0
C 14 150 200 175
l 0 -1 1 11
X1 11 0 20
X1 11 0 20
c 10
f 4
m 250 20
T 15 0
X 0
m 700 20
F 3 2 0
T 15 0
HOLOCENE
m 2240 20
T 15 0
X 1
f 0
w 200 188 2562 1968
c 14
a 7
X0 3 4
X-74 26
X19 2131
X1327 1956
X2582 921
X2602 6
X92 10
X-74 26
c 36
c 35
c 34
c 33
c 32
c 56
c 36
c 56
c 36
c 55
c 35
c 54
c 34
c 53
c 33
c 52
c 32
c 51
c 31
c 50
a 5
X0 15 16
X2648 1615
X2492 1852
X2698 1935
X2854 1687
X2648 1615
c 30
a 5
X0 10 10
X330 1974
X335 1855
X114 1853
X113 1977
X330 1974
a 5
X0 10 10
X382 1855
X380 1784
X159 1781
X162 1854
X382 1855
a 5
X0 10 10
X370 1779
X368 1644
X146 1641
X148 1776
X370 1779
a 5
X0 10 10
X303 1372
X375 1022
X154 1010
X83 1363
X303 1372
a 5
X0 10 10
X283 1013
X340 630
X132 610
X65 995
X283 1013
c 69
c 49
a 5
X0 16 15
X2508 1528
X2364 1765
X2492 1852
X2648 1615
X2508 1528
c 29
a 5
X0 8 9
X501 1981
X508 1861
X335 1855
X330 1974
X501 1981
a 5
X0 8 9
X555 1862
X553 1789
X380 1784
X382 1855
X555 1862
a 5
X0 8 9
X543 1788
X543 1652
X368 1644
X370 1779
X543 1788
a 5
X0 8 9
X272 1642
X277 1369
X105 1361
X96 1638
X272 1642
a 5
X0 8 9
X479 1383
X548 1037
X375 1022
X307 1371
X479 1383
a 5
X0 8 9
X456 1029
X504 649
X340 630
X283 1013
X456 1029
a 5
X0 8 9
X201 613
X352 20
X212 -8
X39 586
X201 613
c 68
c 48
a 5
X0 16 16
X2463 1496
X2345 1746
X2364 1765
X2508 1528
X2463 1496
a 5
X0 16 16
X2526 1862
X2448 1979
X2504 2014
X2589 1896
X2526 1862
a 5
X0 16 16
X2014 1966
X1930 2067
X1989 2105
X2069 1997
X2014 1966
c 28
a 5
X0 9 8
X569 1970
X572 1863
X508 1861
X501 1981
X569 1970
a 5
X0 9 8
X631 1867
X624 1792
X553 1789
X555 1862
X631 1867
a 5
X0 9 8
X617 1789
X614 1659
X543 1652
X543 1788
X617 1789
a 5
X0 9 8
X391 1639
X365 1372
X277 1369
X272 1642
X391 1639
a 5
X0 9 8
X591 1381
X647 1048
X548 1037
X479 1383
X591 1381
a 5
X0 9 8
X531 1035
X612 657
X504 649
X456 1029
X531 1035
a 5
X0 9 8
X329 627
X486 36
X352 20
X201 613
X329 627
c 67
c 47
a 5
X0 14 15
X2735 1241
X2561 1540
X2656 1602
X2847 1303
X2735 1241
a 5
X0 14 15
X2355 1439
X2285 1549
X2408 1617
X2463 1496
X2355 1439
a 5
X0 14 15
X2301 1559
X2227 1683
X2345 1746
X2408 1617
X2301 1559
a 5
X0 14 15
X2422 1797
X2345 1910
X2448 1979
X2526 1862
X2422 1797
a 5
X0 14 15
X2358 1914
X2312 1981
X2407 2052
X2452 1984
X2358 1914
a 5
X0 14 15
X2263 1959
X2219 2027
X2290 2107
X2364 2021
X2263 1959
a 5
X0 14 15
X1909 1898
X1824 2004
X1930 2067
X2014 1966
X1909 1898
c 27
a 5
X0 9 9
X679 1945
X671 1867
X572 1863
X569 1970
X679 1945
a 5
X0 9 9
X727 1865
X725 1787
X624 1792
X631 1867
X727 1865
a 5
X0 9 9
X711 1789
X711 1659
X614 1659
X617 1789
X711 1789
a 5
X0 9 9
X476 1649
X478 1508
X376 1500
X391 1639
X476 1649
a 5
X0 9 9
X459 1508
X469 1381
X365 1372
X376 1500
X459 1508
a 5
X0 9 9
X704 1382
X743 1053
X647 1048
X591 1381
X704 1382
a 5
X0 9 9
X688 1047
X760 682
X612 657
X531 1035
X688 1047
a 5
X0 9 9
X476 644
X603 53
X486 36
X329 627
X476 644
c 66
c 46
a 5
X0 15 14
X2474 -368
X2415 52
X2588 94
X2669 -324
X2474 -368
a 5
X0 15 14
X2631 142
X2483 710
X2613 746
X2797 181
X2631 142
a 5
X0 15 14
X2679 801
X2534 1141
X2688 1216
X2865 879
X2679 801
a 5
X0 15 14
X2586 1166
X2432 1464
X2561 1540
X2735 1241
X2586 1166
a 5
X0 15 14
X2226 1378
X2160 1504
X2285 1549
X2355 1439
X2226 1378
a 5
X0 15 14
X2174 1509
X2107 1638
X2227 1683
X2301 1559
X2174 1509
a 5
X0 15 14
X2291 1705
X2241 1814
X2345 1910
X2422 1797
X2291 1705
a 5
X0 15 14
X2241 1814
X2200 1898
X2312 1981
X2358 1914
X2241 1814
a 5
X0 15 14
X2162 1883
X2137 1941
X2219 2027
X2263 1959
X2162 1883
a 5
X0 15 14
X1775 1859
X1749 1986
X1824 2004
X1909 1898
X1775 1859
c 26
a 5
X0 7 8
X805 1922
X795 1863
X671 1867
X679 1945
X805 1922
a 5
X0 7 8
X840 1861
X833 1773
X725 1787
X727 1865
X840 1861
a 5
X0 7 8
X833 1773
X825 1656
X711 1659
X711 1789
X833 1773
a 5
X0 7 8
X624 1661
X630 1518
X478 1508
X476 1649
X624 1661
a 5
X0 7 8
X615 1520
X629 1380
X469 1381
X459 1508
X615 1520
a 5
X0 7 8
X859 1392
X906 1069
X743 1053
X704 1382
X859 1392
a 5
X0 7 8
X845 1063
X909 709
X760 682
X688 1047
X845 1063
a 5
X0 7 8
X693 672
X798 93
X603 53
X476 644
X693 672
c 65
c 45
c 25
c 45
a 5
X0 15 15
X1961 -400
X1967 48
X2415 52
X2474 -368
X1961 -400
a 5
X0 15 15
X2150 92
X2051 671
X2483 710
X2631 142
X2150 92
a 5
X0 15 15
X2281 738
X2170 1072
X2534 1141
X2679 801
X2281 738
a 5
X0 15 15
X2209 1083
X2100 1383
X2432 1464
X2586 1166
X2209 1083
a 5
X0 15 15
X2078 1381
X2049 1511
X2160 1504
X2226 1378
X2078 1381
a 5
X0 15 15
X2049 1511
X2014 1643
X2107 1638
X2174 1509
X2049 1511
a 5
X0 15 15
X2078 1659
X2052 1785
X2241 1814
X2291 1705
X2078 1659
a 5
X0 15 15
X2041 1784
X2020 1842
X2200 1898
X2241 1814
X2041 1784
a 5
X0 15 15
X1929 1826
X1913 1881
X2137 1941
X2162 1883
X1929 1826
a 5
X0 15 15
X1562 1845
X1553 1973
X1749 1986
X1775 1859
X1562 1845
c 25
a 5
X0 8 7
X691 2077
X658 1949
X441 1987
X491 2113
X691 2077
a 5
X0 8 7
X1005 1910
X1003 1854
X795 1863
X805 1922
X1005 1910
a 5
X0 8 7
X1099 1851
X1102 1791
X833 1773
X840 1861
X1099 1851
a 5
X0 8 7
X1113 1790
X1103 1665
X825 1656
X833 1773
X1113 1790
a 5
X0 8 7
X1034 1662
X1033 1528
X630 1518
X624 1661
X1034 1662
a 5
X0 8 7
X1033 1528
X1032 1397
X629 1380
X615 1520
X1033 1528
a 5
X0 8 7
X1055 1395
X1107 1088
X906 1069
X859 1392
X1055 1395
a 5
X0 8 7
X1066 1082
X1138 742
X909 709
X845 1063
X1066 1082
a 5
X0 8 7
X902 706
X992 121
X798 93
X693 672
X902 706
a 5
X0 8 7
X809 92
X852 -357
X689 -380
X579 48
X809 92
c 44
a 5
X0 13 14
X1440 1977
X1441 1835
X1562 1845
X1553 1973
X1440 1977
a 5
X0 13 14
X1794 1847
X1804 1798
X1929 1826
X1913 1881
X1794 1847
a 5
X0 13 14
X1863 1787
X1826 1695
X2041 1784
X2020 1842
X1863 1787
a 5
X0 13 14
X1862 1677
X1858 1612
X2078 1659
X2052 1785
X1862 1677
a 5
X0 13 14
X1827 1620
X1863 1349
X2078 1381
X2014 1643
X1827 1620
a 5
X0 13 14
X1922 1365
X1975 1057
X2209 1083
X2100 1383
X1922 1365
a 5
X0 13 14
X1909 1041
X1983 706
X2281 738
X2170 1072
X1909 1041
a 5
X0 13 14
X1742 665
X1812 77
X2150 92
X2051 671
X1742 665
a 5
X0 13 14
X1645 52
X1677 -395
X1961 -400
X1967 48
X1645 52
c 43
a 5
X0 14 13
X1366 2090
X1365 1966
X1429 1977
X1430 2090
X1366 2090
a 5
X0 14 13
X1365 1966
X1361 1831
X1441 1835
X1440 1977
X1365 1966
a 5
X0 14 13
X1706 1843
X1717 1795
X1804 1798
X1794 1847
X1706 1843
a 5
X0 14 13
X1777 1782
X1779 1616
X1826 1695
X1863 1787
X1777 1782
a 5
X0 14 13
X1779 1616
X1779 1616
X1858 1612
X1862 1677
X1779 1616
a 5
X0 14 13
X1730 1616
X1781 1361
X1863 1349
X1827 1620
X1730 1616
a 5
X0 14 13
X1856 1388
X1887 1064
X1975 1057
X1922 1365
X1856 1388
c 42
a 5
X0 14 14
X1335 2087
X1336 1832
X1361 1831
X1366 2090
X1335 2087
a 5
X0 14 14
X1697 1614
X1761 1374
X1781 1361
X1730 1616
X1697 1614
a 5
X0 14 14
X1826 1399
X1870 1199
X1877 1153
X1856 1388
X1826 1399
a 5
X0 14 14
X1946 1263
X1964 1070
X1887 1064
X1877 1153
X1946 1263
a 5
X0 14 14
X1250 1996
X1242 1837
X1336 1832
X1336 2028
X1250 1996
a 5
X0 14 14
X1612 1610
X1678 1408
X1761 1374
X1697 1614
X1612 1610
a 5
X0 14 14
X1733 1439
X1814 1274
X1870 1199
X1826 1399
X1733 1439
a 5
X0 14 14
X1852 1327
X1870 1063
X1964 1070
X1946 1263
X1852 1327
c 41
a 5
X0 12 13
X1175 1982
X1149 1869
X1242 1837
X1250 1996
X1175 1982
a 5
X0 12 13
X1151 1990
X1113 1906
X1149 1869
X1175 1982
X1151 1990
c 4
f 3
m 1141 1968
d 1113 1906
c 5
f 1
f 0
c 41
c 24
a 5
X0 8 8
X854 2061
X829 1919
X658 1949
X691 2077
X854 2061
a 5
X0 8 8
X1182 1902
X1187 1853
X1003 1854
X1005 1910
X1182 1902
a 5
X0 8 8
X1242 1837
X1194 1748
X1102 1791
X1099 1851
X1242 1837
a 5
X0 8 8
X1226 1729
X1214 1667
X1103 1665
X1113 1790
X1226 1729
a 5
X0 8 8
X1184 1675
X1189 1404
X1032 1397
X1034 1662
X1184 1675
a 5
X0 8 8
X1250 1416
X1280 1108
X1107 1088
X1055 1395
X1250 1416
a 5
X0 8 8
X1212 1099
X1276 761
X1138 742
X1066 1082
X1212 1099
a 5
X0 8 8
X1032 728
X1120 139
X992 121
X902 706
X1032 728
a 5
X0 8 8
X957 115
X1038 -334
X852 -357
X809 92
X957 115
c 23
a 5
X0 6 7
X938 2046
X920 1912
X829 1919
X854 2061
X938 2046
a 5
X0 6 7
X1265 1902
X1271 1854
X1187 1853
X1182 1902
X1265 1902
a 5
X0 6 7
X1327 1839
X1313 1675
X1194 1748
X1242 1837
X1327 1839
a 5
X0 6 7
X1313 1675
X1313 1675
X1214 1667
X1226 1729
X1313 1675
a 5
X0 6 7
X1265 1676
X1292 1423
X1189 1404
X1184 1675
X1265 1676
a 5
X0 6 7
X1372 1443
X1381 1121
X1280 1108
X1250 1416
X1372 1443
c 22
a 5
X0 7 6
X987 2166
X958 1911
X920 1912
X958 2170
X987 2166
a 5
X0 7 6
X1268 1902
X1268 1902
X1265 1902
X1265 1902
X1268 1902
a 5
X0 7 6
X1316 1675
X1316 1675
X1313 1675
X1313 1675
X1316 1675
a 5
X0 7 6
X1301 1675
X1346 1436
X1292 1423
X1265 1676
X1301 1675
a 5
X0 7 6
X1413 1457
X1444 1256
X1378 1210
X1372 1443
X1413 1457
a 5
X0 7 6
X1527 1318
X1536 1127
X1381 1121
X1378 1210
X1527 1318
a 5
X0 7 6
X1039 2067
X1022 1909
X958 1911
X981 2108
X1039 2067
a 5
X0 7 6
X1268 1902
X1268 1902
X1265 1902
X1265 1902
X1268 1902
a 5
X0 7 6
X1316 1675
X1316 1675
X1313 1675
X1313 1675
X1316 1675
a 5
X0 7 6
X1384 1675
X1444 1475
X1346 1436
X1301 1675
X1384 1675
a 5
X0 7 6
X1500 1504
X1576 1337
X1444 1256
X1413 1457
X1500 1504
a 5
X0 7 6
X1615 1391
X1630 1129
X1536 1127
X1527 1318
X1615 1391
c 21
a 5
X0 7 7
X1104 2021
X1080 1908
X1022 1909
X1039 2067
X1104 2021
a 5
X0 7 7
X1268 1902
X1268 1902
X1265 1902
X1265 1902
X1268 1902
a 5
X0 7 7
X1151 1990
X1113 1906
X1080 1908
X1104 2021
X1151 1990
a 5
X0 7 7
X1268 1902
X1268 1902
X1265 1902
X1265 1902
X1268 1902
c 4
f 3
m 1141 1968
d 1113 1906
m 1268 1902
d 1268 1902
c 5
f 1
m 1113 1906
d 1268 1902
f 0
c 21
f 0
c 12
a 12
X0 4 4
X1533 1607
X1819 1399
X1831 1407
X1848 1433
X1861 1459
X1873 1489
X1879 1518
X1888 1547
X1890 1576
X1889 1612
X1888 1640
X1533 1607
a 21
X0 4 4
X1819 1399
X1931 1319
X1950 1324
X1971 1362
X1989 1396
X2006 1437
X2019 1479
X2026 1519
X2031 1563
X2033 1606
X2032 1649
X1888 1640
X1889 1612
X1890 1576
X1888 1547
X1879 1518
X1873 1489
X1861 1459
X1848 1433
X1831 1407
X1819 1399
a 21
X0 4 4
X1931 1319
X1950 1324
X1971 1362
X1989 1396
X2006 1437
X2019 1479
X2026 1519
X2031 1563
X2033 1606
X2032 1649
X2169 1658
X2175 1601
X2171 1545
X2165 1493
X2155 1438
X2139 1384
X2117 1334
X2094 1288
X2064 1242
X2063 1223
X1931 1319
a 21
X0 4 4
X2063 1223
X2156 1161
X2177 1153
X2213 1212
X2244 1271
X2269 1333
X2291 1395
X2304 1460
X2311 1528
X2315 1595
X2307 1664
X2169 1658
X2175 1601
X2171 1545
X2165 1493
X2155 1438
X2139 1384
X2117 1334
X2094 1288
X2064 1242
X2063 1223
c 14
a 14
X0 3 4
X2382 1113
X2515 1157
X2640 1195
X2676 801
X2775 817
X2731 855
X2627 815
X2597 841
X2591 840
X2583 854
X2460 925
X2316 1001
X2268 1010
X2382 1113
a 17
X0 3 4
X2673 1401
X2798 1361
X2797 1337
X2675 1309
X2680 1318
X2567 1362
X2581 1358
X2500 1342
X2499 1349
X2485 1354
X2450 1333
X2441 1346
X2578 1426
X2566 1446
X2569 1462
X2673 1401
X2673 1401
a 27
X0 3 4
X2607 1678
X2589 1597
X2559 1452
X2482 1429
X2376 1558
X2337 1566
X2328 1579
X2330 1594
X2258 1530
X2125 1503
X2084 1490
X2055 1335
X2139 1192
X2232 1240
X2215 1310
X2282 1372
X2364 1414
X2414 1319
X2392 1226
X2403 1235
X2393 1174
X2400 1175
X2382 1113
X2515 1157
X2640 1195
X2673 1401
X2607 1678
c 11
A 19
X1488 1595
X1563 1478
X1557 1470
X1646 1353
X1662 1297
X1630 1289
X1623 1303
X1570 1322
X1496 1426
X1456 1489
X1462 1503
X1393 1643
X1281 1707
X1232 1806
X1237 1792
X1210 1869
X1486 1665
X1488 1595
X1488 1595
A 22
X2382 1113
X2515 1157
X2640 1195
X2653 1159
X2636 1141
X2627 1154
X2617 1054
X2609 1068
X2564 955
X2631 906
X2755 928
X2770 915
X2775 817
X2731 855
X2627 815
X2597 841
X2591 840
X2583 854
X2460 925
X2316 1001
X2268 1010
X2382 1113
A 26
X2055 1335
X2139 1192
X2232 1240
X2215 1310
X2282 1372
X2364 1414
X2414 1319
X2392 1226
X2403 1235
X2393 1174
X2400 1175
X2382 1113
X2268 1010
X2140 1068
X2038 1073
X1892 1126
X1786 1204
X1798 1219
X1779 1218
X1712 1328
X1699 1328
X1650 1389
X1563 1478
X1488 1595
X2055 1335
X2055 1335
A 7
X2491 1220
X2531 1250
X2514 1239
X2512 1246
X2500 1244
X2491 1220
X2491 1220
A 5
X2560 1270
X2594 1262
X2598 1278
X2560 1270
X2560 1270
A 17
X2673 1401
X2798 1361
X2797 1337
X2675 1309
X2680 1318
X2567 1362
X2581 1358
X2500 1342
X2499 1349
X2485 1354
X2450 1333
X2441 1346
X2578 1426
X2566 1446
X2569 1462
X2673 1401
X2673 1401
A 24
X2718 2215
X2662 2092
X2614 2075
X2584 1953
X2594 1822
X2587 1704
X2607 1678
X2589 1597
X2559 1452
X2482 1429
X2376 1558
X2337 1566
X2328 1579
X2330 1594
X2258 1530
X2125 1503
X2084 1490
X2055 1335
X1488 1595
X1232 1806
X1187 1898
X1199 1904
X1199 2049
X2718 2215
f 1
c 8
m 1488 1595
d 1479 1595
d 1551 1463
d 1620 1345
d 1627 1346
d 1662 1304
d 1635 1310
d 1534 1427
d 1476 1461
d 1507 1469
d 1455 1538
d 1369 1678
d 1265 1770
d 1272 1784
d 1488 1595
m 2286 1027
d 2151 1091
d 2065 1075
d 1918 1135
d 1800 1198
d 1805 1220
d 1798 1226
d 1802 1255
d 1696 1377
d 1656 1403
d 1569 1499
d 1516 1589
d 1488 1595
m 1369 1678
d 1265 1770
d 1272 1784
d 1255 1798
d 1256 1819
d 1244 1820
d 1214 1968
f 1
c 94
a 74
X1 31 30
X1299 1822
X1293 1822
X1284 1822
X1279 1819
X1273 1819
X1267 1815
X1261 1812
X1255 1809
X1249 1805
X1244 1802
X1240 1795
X1234 1792
X1231 1785
X1228 1782
X1225 1775
X1225 1768
X1221 1761
X1221 1758
X1221 1751
X1220 1744
X1223 1737
X1223 1730
X1225 1726
X1228 1719
X1231 1712
X1233 1708
X1236 1701
X1242 1698
X1248 1694
X1250 1690
X1256 1687
X1262 1683
X1268 1679
X1274 1679
X1283 1676
X1289 1675
X1295 1675
X1301 1675
X1307 1675
X1316 1679
X1322 1678
X1328 1682
X1334 1685
X1340 1689
X1343 1692
X1349 1696
X1354 1699
X1357 1706
X1360 1710
X1363 1717
X1366 1724
X1369 1727
X1369 1734
X1372 1741
X1372 1748
X1372 1755
X1372 1758
X1369 1765
X1370 1772
X1367 1779
X1364 1783
X1361 1790
X1355 1793
X1352 1800
X1347 1804
X1341 1807
X1335 1811
X1330 1814
X1324 1818
X1318 1818
X1313 1821
X1304 1822
X1299 1822
X1299 1822
c 92
a 74
X1 29 30
X1230 1872
X1227 1872
X1225 1872
X1222 1872
X1219 1869
X1216 1869
X1213 1869
X1210 1866
X1207 1866
X1204 1863
X1201 1859
X1198 1859
X1198 1856
X1195 1853
X1195 1849
X1195 1849
X1192 1846
X1192 1842
X1191 1839
X1191 1835
X1191 1832
X1194 1828
X1194 1828
X1193 1825
X1196 1821
X1199 1818
X1199 1818
X1201 1814
X1204 1810
X1207 1810
X1209 1807
X1212 1807
X1215 1807
X1218 1803
X1221 1803
X1224 1803
X1226 1803
X1229 1803
X1232 1803
X1235 1802
X1238 1806
X1241 1806
X1244 1806
X1247 1809
X1250 1809
X1253 1812
X1256 1816
X1256 1816
X1259 1819
X1262 1823
X1262 1826
X1262 1826
X1265 1829
X1265 1833
X1265 1836
X1265 1840
X1265 1843
X1263 1847
X1263 1847
X1263 1850
X1260 1854
X1260 1857
X1257 1857
X1255 1861
X1252 1864
X1249 1865
X1247 1868
X1244 1868
X1241 1868
X1238 1872
X1236 1872
X1233 1872
X1230 1872
X1230 1872
f 8
c 7
m 1232 1855
d 1206 1932
m 1222 1920
d 1206 1932
d 1200 1912
m 1505 1539
d 1463 1605
m 1481 1598
d 1463 1605
d 1462 1586
f 3
c 93
a 13
X3 31 31
X1252 1805
X1257 1791
X1263 1784
X1269 1784
X1271 1777
X1268 1770
X1297 1749
X1305 1724
X1334 1703
X1352 1706
X1340 1710
X1274 1784
X1252 1805
c 91
a 5
X3 30 29
X1221 1855
X1216 1820
X1227 1820
X1237 1834
X1221 1855
f 0
f 0
c 3
c 2
m 200 188
d 200 1968
d 2562 1968
d 2562 188
d 200 188
m 2562 183
d 2441 172
d 2268 159
d 2092 148
d 1916 140
d 1738 134
d 1560 130
d 1381 129
d 1202 130
d 1024 134
d 846 140
d 670 148
d 495 159
d 321 172
d 200 183
m 200 547
d 322 533
d 495 516
d 670 502
d 847 492
d 1024 484
d 1202 479
d 1381 478
d 1560 479
d 1738 484
d 1916 492
d 2092 502
d 2267 516
d 2440 533
d 2562 547
m 2562 918
d 2415 897
d 2246 876
d 2076 860
d 1903 847
d 1730 838
d 1556 833
d 1381 831
d 1206 833
d 1032 838
d 859 847
d 687 860
d 516 876
d 347 897
d 200 918
m 200 1294
d 238 1286
d 396 1259
d 556 1236
d 719 1218
d 883 1203
d 1048 1193
d 1214 1187
d 1381 1185
d 1548 1187
d 1714 1193
d 1879 1203
d 2043 1218
d 2206 1236
d 2366 1259
d 2524 1286
d 2562 1294
m 2562 1675
d 2440 1646
d 2294 1617
d 2146 1593
d 1996 1573
d 1843 1558
d 1690 1547
d 1536 1540
d 1381 1538
d 1226 1540
d 1072 1547
d 919 1558
d 767 1573
d 616 1593
d 468 1617
d 322 1646
d 200 1675
m 560 1968
d 563 1967
d 695 1943
d 830 1922
d 966 1907
d 1104 1896
d 1242 1889
d 1381 1887
d 1520 1889
d 1659 1896
d 1796 1907
d 1932 1922
d 2067 1943
d 2199 1967
d 2202 1968
m 508 1968
d 457 1804
d 409 1628
d 368 1450
d 332 1269
d 303 1088
d 280 906
d 263 723
d 253 541
d 249 359
d 252 178
d 259 48
m 604 48
d 600 152
d 597 329
d 600 508
d 607 687
d 618 866
d 634 1046
d 654 1225
d 678 1403
d 706 1580
d 739 1756
d 776 1930
d 785 1968
m 1057 1968
d 1048 1900
d 1028 1726
d 1011 1550
d 995 1374
d 982 1197
d 971 1019
d 963 841
d 957 664
d 953 487
d 952 311
d 953 136
d 955 48
m 1310 48
d 1310 129
d 1309 303
d 1310 478
d 1310 654
d 1311 831
d 1313 1008
d 1314 1185
d 1317 1362
d 1319 1538
d 1322 1713
d 1325 1887
d 1327 1968
m 1597 1968
d 1603 1892
d 1617 1719
d 1628 1544
d 1639 1367
d 1647 1190
d 1655 1013
d 1660 835
d 1664 658
d 1667 482
d 1668 306
d 1667 132
d 1666 48
m 2019 48
d 2022 144
d 2024 320
d 2022 498
d 2016 676
d 2007 854
d 1994 1033
d 1978 1212
d 1958 1389
d 1935 1566
d 1908 1742
d 1878 1916
d 1868 1968
m 2143 1968
d 2147 1957
d 2194 1783
d 2235 1607
d 2272 1429
d 2302 1249
d 2328 1069
d 2348 888
d 2362 707
d 2371 526
d 2375 346
d 2372 166
d 2366 48
m 2562 1534
d 2526 1666
d 2469 1843
d 2423 1968
z
A frame from Michel Debiche's plate tectonic movie.
END_OF_FILE
if test 16062 -ne `wc -c <'Vplot_Kernel/filters/Tests/DEMO_Tectonics'`; then
echo shar: \"'Vplot_Kernel/filters/Tests/DEMO_Tectonics'\" unpacked with wrong size!
fi
# end of 'Vplot_Kernel/filters/Tests/DEMO_Tectonics'
fi
echo shar: End of archive 18 \(of 24\).
cp /dev/null ark18isdone
MISSING=""
for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 ; do
if test ! -f ark${I}isdone ; then
MISSING="${MISSING} ${I}"
fi
done
if test "${MISSING}" = "" ; then
echo You have unpacked all 24 archives.
rm -f ark[1-9]isdone ark[1-9][0-9]isdone
else
echo You still need to unpack the following archives:
echo " " ${MISSING}
fi
## End of shell archive.
exit 0
--
Please send comp.sources.unix-related mail to rsalz@uunet.uu.net.