JOHNSON@NUHUB.ACS.NORTHEASTERN.EDU ("I am only an egg.") (07/13/87)
I have this interesting little problem. I've had three micom np100 boards in my 8650 and none of them have as yet passed the internal on-board diagnostics on power up. Micom put the third board in and the same thing happened. Micom says, and I believe them, that the np100 board is a mature product (e.i., it works other places). H o w e v e r !!! I know another site with an 8600. When the np100 board was first plugged into it the 8600 refused to boot. The np100 hung the unibus which in turn hung the vax on boot. I was told by the MIS director there that something on the board was running at the wrong speed and that's what hung the bus. Thus, it seems that there is some kind of problem with 86xx's and the np100 board from micom. Micom took back the last board they plugged into my machine and are going to give it back to the engineers to figure out what's up. Anybody out there have similar (or any) problems with np100 boards on 86xx's? Any solutions to the problems? USnail: Chris Johnson Academic Computer Services Northeastern University 39RI 360 Huntington Ave. Boston, MA. U.S.A. 02115 AT&T: (617) 437-2335 CSNET: johnson@nuhub.acs.northeastern.edu ARPANET: johnson%nuhub.acs.northeastern.edu@relay.cs.net BITNET: johnson%nuhub.acs.northeastern.edu@csnet-relay (Always vote. There may not be anything you want to vote for, but there might be something you want to vote against.)