cserh000@KENTVMS.BITNET (10/01/87)
We recently aquirred a DMR11, in order to establish a 56 kb, DDCMP Decnet link. It is installed on an 11/780, with 16 mb memory. At the time we installed the DMR11 the DDS circuit wasn't ready, so we are using it on a 9600 baud analog circuit, with an rs232 interface. The problem we are seeing is that the DMR11 is giving us extremely poor performance; in fact, replacing the DMR11 with a DMF32 sync. port gave us 30 times greater throughput, as measured by DTSEND. I had to steal the DMF, so just using it is not the answer. Does anyone have any insight in using a DMR11 at this low speed. Have we goofed up the switch settings, etc? Any help would be appreciated. Leo Holmberg (CSERH000@KENTVMS.BITNET)