rob@array.UUCP (Rob Marchand) (11/20/87)
Hi, I'm shortly going to be involved in a project requiring the use of VAX PSI (X.25 communications manager) to connect a variety of X.25-speaking machines via 56Kbps links. (the DEC product is a MicroVAX II). I'm curious as to any 'gotchas' that I should be aware of, and I'd like to hear from people that have had problems, or found difficulties in the use of PSI from the System Services level. I understand that the hardware in use will probably be something like a KMV1A. I've used a KMS11 with HDLC level stuff on a VAX before, and I know that was a nightmare (first install anyone had done with a KMS11 anywhere within spitting distance, and the manual was trash...), so I'm trying to get a head start on this one. Reply by e-mail if you can. I'm at... rob@array.UUCP (via UUCP) ...or... rob%array.UUCP@UUNET.UU.NET (from ARPAnet) Thanks in Advance... Rob Marchand -- Rob Marchand UUCP : {mnetor,utzoo}!lsuc!array!rob Array Systems Computing ARPA : rob%array.UUCP@uunet.UU.NET 200-5000 Dufferin Street Phone : +1(416)736-0900 Fax: (416) 736-4715 Downsview, Ont CANADA M3H 5T5 Telex : 063666 (CNCP EOS TOR) .TO 21:ARY001