bin@rhesus.primate.wisc.edu (Brain in Neutral) (04/22/88)
I have a VAXstation 2000 that I want to run Ultrix on. The local computing center is trying to boot it over the ethernet from a VMS machine, but it fails. This is what the console on my machine shows: Ultrix V2.2 System #1: Wed Dec 2 18:46:46 EST 1987 real mem = 6279168 avail mem = 4379648 using 17 buffers containing 139264 bytes of memory VAXstation 2000 with an FPU sdc0 at uba0 csr 0x200c0000 vec 0x1fc, ipl 0x14 Drive 0 is RD53 rd0 at sdc0 slave 0 se0 at uba0 csr 0x200e0000 vec 0x50, ipl 0x14 ss0 at uba0 csr 0x200a0000 fec 0xc0, ipl 0x14 sm0 at uba0 csr 0x200f0000 vec 0x44, ipl 0x14 WARNING: todr too small -- CHECK AND RESET the DATE! RSM Software Distribution Services Installation of Ultrix-32 Version 2.02 Bringing up DECnet ... Working ... Connecting to the RSM installation server on node wircs3 dcp: can't open "wircs3/RSM$MANAGER/password::RSM$SDS_OS_LIBRARY:[ULTRIX20.SYS0]restore.image", Connect failed, unrecognized node name The installation software could not access the Software Distribution Services server or the software needed to continue this installation could not be copied to this system # Anybody seen this and know what the problem is?