T_WADE%ccvax.ucd.ie@CUNYVM.CUNY.EDU ("Tom Wade, Systems") (05/10/88)
I am running DECnet over a CI between a 780 and a 750 in a cluster. All disks are shared on a HSC-50. I have no trouble with users using RTPAD (SET HOST), but getting remote objects to run is another matter. Most of the time, they fail with "", occasionally they get halfway through before "". Any ideas ? My circuit/executor characteristics are below, as I expect there is something wrong with them. Thanks for any help. DECnet database for ADMIN Node Volatile Characteristics as of 9-MAY-1988 16:41:12 Executor node = 1.3 (ADMIN) Identification = UCD ADMIN VAX-11/750 Management version = V4.0.0 Incoming timer = 30 Outgoing timer = 30 NSP version = V4.0.0 Maximum links = 24 Delay factor = 80 Delay weight = 5 Inactivity timer = 60 Retransmit factor = 10 Routing version = V2.0.0 Type = routing IV Routing timer = 600 Broadcast routing timer = 180 Maximum address = 3 Maximum circuits = 2 Maximum cost = 10 Maximum hops = 3 Maximum visits = 6 Maximum area = 63 Max broadcast nonrouters = 64 Max broadcast routers = 32 Area maximum cost = 1022 Area maximum hops = 30 Maximum buffers = 100 Buffer size = 576 Default access = incoming and outgoing Pipeline quota = 3456 Default proxy access = incoming and outgoing Alias maximum links = 32 Known Circuit Volatile Characteristics as of 9-MAY-1988 16:41:49 Circuit = CI-0.2 State = on Service = enabled Cost = 10 Hello timer = 15 Tributary = 2 Maximum buffers = 9 Verification = disabled Adjacent node = 1.2 (ADMIN2) Listen timer = 30 Known Node Volatile Summary as of 9-MAY-1988 16:42:05 Executor node = 1.3 (ADMIN) State = on Identification = UCD ADMIN VAX-11/750 Node State Active Delay Circuit Next node Links 1.2 (ADMIN2) reachable 2 1 CI-0.2 1.2 (ADMIN2) DECnet database for ADMIN2 Node Volatile Characteristics as of 9-MAY-1988 16:38:30 Executor node = 1.2 (ADMIN2) Identification = UCD ADMIN VAX-11/780 Management version = V4.0.0 Incoming timer = 30 Outgoing timer = 30 NSP version = V4.0.0 Maximum links = 24 Delay factor = 80 Delay weight = 5 Inactivity timer = 60 Retransmit factor = 10 Routing version = V2.0.0 Type = routing IV Routing timer = 600 Broadcast routing timer = 180 Maximum address = 3 Maximum circuits = 2 Maximum cost = 10 Maximum hops = 3 Maximum visits = 6 Maximum area = 63 Max broadcast nonrouters = 64 Max broadcast routers = 32 Area maximum cost = 1022 Area maximum hops = 30 Maximum buffers = 100 Buffer size = 576 Default access = incoming and outgoing Pipeline quota = 3456 Default proxy access = incoming and outgoing Alias maximum links = 32 Known Circuit Volatile Characteristics as of 9-MAY-1988 16:39:15 Circuit = CI-0.3 State = on Service = enabled Cost = 10 Hello timer = 15 Tributary = 3 Maximum buffers = 9 Verification = disabled Adjacent node = 1.3 (ADMIN) Listen timer = 30 Known Node Volatile Summary as of 9-MAY-1988 16:39:38 Executor node = 1.2 (ADMIN2) State = on Identification = UCD ADMIN VAX-11/780 Node State Active Delay Circuit Next node Links 1.3 (ADMIN) reachable 1 1 CI-0.3 1.3 (ADMIN) ------------------------------------------------------------------------- Tom Wade Heanet: T-Wade@ccvax.ucd.ie Systems Programmer Ean: t-wade@ccvax.ucd.irl Computer Center PSI: PSI%+27243154000712::T-WADE University College Belfield Telex: (0500) 91196 UCD EI Dublin 4. Uucp: t-wade%ccvax.ucd.ie@tcdcs.uucp Ireland Bitnet: twade@irlearn.bitnet Voice: +353-1-693244 Ext 2456 ICBMnet: 53 18 20 N; 06 13 38 W; 25m -------------------------------------------------------------------------