rrk@byuvax.bitnet (04/30/88)
$ SET HOST 0/LOG=LOGFILE To use this the network must be started, but you can start the network on a single node without a DECNET License.
OBERMAN@ICDC.LLNL.GOV ("Kevin Oberman, LLNL, 422-6955, L-156", 415) (05/12/88)
>It's easiest if you have DECnet. You can just do SET HOST 0 /LOG=<logname>.
It is NOT required that you have DECnet to do this. Any VMS system can do
it IF you do a startnet first. The DECnet license is only required if you
wish to connect to another system. (Any SET CIRCUIT commands will fail without
the DECnet key.)
R. Kevin Oberman
Lawrence Livermore National Laboratory
Internet: oberman@icdc.llnl.gov
(415) 422-6955
Disclaimer: Don't take this too seriously. I just like to improve my typing
and probably don't really know anything useful about anything.