XRJJM%SCINT.SPAN@STAR.STANFORD.EDU (John McMahon, (07/11/88)
***> My Question-- How do you, or how can you "Trace" LAT connections? I ***> know that from a VAX host running LAT... One option is that you can sit at a VAX and connect to any terminal server on your ethernet and do a SHOW SESSIONS, or SHOW PORT or whatever you need. What you need is: a) The "System" Password for the server b) The Ethernet Hardware address for the server and c) Access to the NCP command. $ MCP NCP NCP> CONNECT VIA (Ethernet Device) PHYSICAL ADDRESS (Ethernet Address) Ethernet Device is UNA-0 for a DENUA... etc. Ethernet Address is the full 08-nn-nn-nn... etc. address for your server. Once you connect to a server, hit return. At the # prompt enter the system password and you are logged into the server. You can now enter priv. mode on the server and do whatever you need to do. I think a SHOW SESSIONS ALL command will help solve your problem. It's not the greatest solution. But I hope it helps. John McMahon xrjjm%scint.span@star.stanford.edu