sback@elbereth.rutgers.edu (Steve Back) (12/07/89)
I'm in the process of upgrading from DECwindows 1.0 to DECwindows 2.0 and I seem to be running in to performance problems. We're running on VAXstation 3100's under VMS. There is a very noticeable delay when ever you click the mouse before the event occures. Iconizing a window is an exception there the delay is less noticeable. Pulling down menus can take several seconds and moving a window seems to take several clicks before the window "catches" I have already tried various options from the Customize Pointer menu with no positive results. DECwindows 1.0 did not have this problem but since it only supported DECnet we need to continue through with this upgrade. Any thought or help would be appreciated. Thanks sback@elbereth.rutgers.edu back@nobel.rutgers.edu jwest@nobel.rutgers.edu
klee@chico.pa.dec.com (Ken Lee) (12/09/89)
In article <Dec.7.09.47.32.1989.2547@elbereth.rutgers.edu>, sback@elbereth.rutgers.edu (Steve Back) writes: > I'm in the process of upgrading from DECwindows 1.0 to DECwindows 2.0 and I posted something about DECwindows 1.0 being based on X10 and DECwindows 2.0 being based on X11. I was refering to versions of the Ultrix Worksystem Software. UWS1.0 is based on X10R4. UWS2.* is based on versions of X11. VMS DECwindows 1.0 is indeed based on X11, not X10. Sorry about any confusion. Ken Lee DEC Western Software Laboratory, Palo Alto, Calif. Internet: klee@decwrl.dec.com uucp: uunet!decwrl!klee