gws@n8emr.UUCP (Gary Sanders ) (05/14/88)
Does anyone have a good set of S register options for
a trailblazer + modem on a unix=pc. I have tried to use
the one provided by telebit, but have problems with it
locking up the PC. I want the serial line locked at 9600,
let the modem figure out how fast/slow a calling or called
modem is.. Any help???
--
Gary W. Sanders {cbosgd|ihnp4}!osu-cis!n8emr!gws
(cis) 72277,1325 (packet) N8EMR @ W8CQK
HAM/SWL BBS (HBBS) 614-457-4227.. 300/1200 bpspjh@mccc.UUCP (Pete Holsberg) (05/15/88)
Here's one that somebody posted a while ago. Q4 S51=4 S52=1 S53=1 S54=1 S58=2 S66=1 S110=1 S111=30 Hope it helps.
jcs@tarkus.UUCP (John C. Sucilla) (05/21/88)
In article <547@n8emr.UUCP> gws@n8emr.UUCP (Gary Sanders (n8emr)) writes: >Does anyone have a good set of S register options for >a trailblazer + modem on a unix=pc. I have tried to use >the one provided by telebit, but have problems with it >locking up the PC. I want the serial line locked at 9600, >let the modem figure out how fast/slow a calling or called >modem is.. Any help??? > Heres the results from my atn?, mines locked at 19200. E1 F1 M0 Q6 T V1 X1 Version BA4.00 S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=040 S08=002 S09=006 S10=007 S11=070 S12=050 S45=000 S47=004 S48=000 S49=000 S50=000 S51=254 S52=002 S53=000 S54=003 S55=000 S56=017 S57=019 S58=002 S59=000 S60=000 S61=045 S62=003 S63=001 S64=000 S65=000 S66=001 S67=000 S68=255 S90=000 S91=000 S92=000 S95=000 S100=000 S101=000 S102=000 S104=000 S110=001 S111=030 S112=001 S121=000 If you really want to lock it at 9600 set S51=255. You can run it at 19200 by setting it to 254. Somebody on the net discovered this undocumented feature a while back, gawd, I'm glad he did! I heard a lot of noise about how the 3b1's tty ports couldnt do 19.2K, they were wrong... My news feeds usually run between 1000-1300 chars/sec now but it did go over 1500 once. -- John "C". Sucilla {ihnp4,chinet,ddsw1}!tarkus!jcs You have a better idea? Now's the time..
kevin@kosman.UUCP (Kevin O'Gorman) (05/24/88)
In article <94@tarkus.UUCP> jcs@tarkus.UUCP (John C. Sucilla) writes: >In article <547@n8emr.UUCP> gws@n8emr.UUCP (Gary Sanders (n8emr)) writes: >>Does anyone have a good set of S register options >Heres the results from my atn?, mines locked at 19200. > [ deleted ] Fine. Now, how do you make calls out at the various speeds. I need 1200 baud on some outgoing calls, the rest are 'blazers. My under- standing is that you are constrained by HDB and vanilla uucp to talk to the modem at the same baud rate you will talk to the system. Or did I miss something?