kph@drutx.ATT.COM (Keith Paul Hageman) (05/23/89)
I have an add-on memory board for the Unix PC but no documentation. Obvious questions are: 1) What must I do to add it physically, i.e., jumpers, etc. 2) What must I do logically, i.e., software changes?? 3) Does someone have some documentation regarding this board?? It's out of another Unix PC and was working at the time is was removed so I assume that it stills works. The board number is PCA D-60-00219-00. The system I'd like to add it to already has 2 meg. Thanks, Keith Hageman att!drutx!kph
mvadh@cbnews.ATT.COM (andrew.d.hay) (05/25/89)
In article <11300@drutx.ATT.COM> kph@drutx.ATT.COM (Keith Paul Hageman) writes:
"I have an add-on memory board for the Unix PC but no documentation.
"
"Obvious questions are:
"
"1) What must I do to add it physically, i.e., jumpers, etc.
nothing.
if it's 2 meg, it must be in the first slot, though.
"2) What must I do logically, i.e., software changes??
nothing.
"3) Does someone have some documentation regarding this board??
nothing.
"It's out of another Unix PC and was working at the time is was removed
"so I assume that it stills works.
you might want to run the memory diagnostics from the diagnostic disk
after you install the board...
--
Andrew Hay +------------------------------------------------------+
Null Fu-Tze | LEARN HOW TO AVOID RIPOFFS! |
AT&T-BL Ward Hill MA | SEND $5... |
mvuxq.att.com!adh +------------------------------------------------------+