gary@rencon.UUCP (Gary Falsken) (12/20/88)
I have available for a fast sale - AT&T Unix Pc - 3B1 It has a 68010 CPU @ 10MHz with 2 MB memory on motherboard and .5 MB RAM on an expansion board (for a total of 2.5 MB main RAM) The expansion board can have up to 1.5MB on it, bring the total RAM possible up to 3.5MB. Also built in is one serial and one parallel port each but the expansion board has 2 additional serial ports for a total of 3 serial ports. The system also has a 67 MB hard drive (internal). A Built-in 300/1200 baud modem, a Mouse and a Monochrome monitor. In the way of Software, I have the following: UNIX 3.5.1 Foundation Set (Unix kernal, phone manager, terminal emulator) UNIX 3.5.1 Development Set (C Compiler, Vi, Nroff, etc) Smart Software including Word Processer, Database, Spreadsheet & Communications. Mailx Kermit HDB UUCP and Miscellaneous 3B1 public domain software All the documentation $1850.00 or best offer! Need fast sale before the New Year if possible. If the buyer is in the S.F. Bay Area can make arrangements to deliver. Call Gary at 415-651-4236.
gary@rencon.UUCP (Gary Falsken) (12/23/88)
The 3B1 system that I had up for sale has been sold! I thank all callers
about it. I hope the new owner will take good care of my pet.
--
Gary Falsken
internet: gary@rencon
usenet: {ames,pacbell,sun,pyramid,hpscdc,hplabs}!rencon!gary
---- is the preferred path.scott@lestat.LIMBO.MN.ORG (Scott Anderson) (01/16/89)
Hi! I have an ATT UNIXPC for sale. It is a standard 3b1 67meg HD and 2 meg of memory. I have version 3.51 of the OS and the development set. I am asking $1900 for it. Scott Anderson scott@lestat.limbo.mn.org 612 222 7711
hans@mongo.UU.NET (Hans K. Fiedler) (08/16/89)
I seem to have lost my copy of the instructions posted to the net for upgrading the memory on the motherboard of a 7300 from 512K to 2M. I'm hoping someone could repost them or mail me a copy. Thanks for the help. -- Hans K. "Don't beleive in luck, Rely on it" Fiedler hans@mongo.uu.net, uunet!mongo!hans HF Consulting, Louisville Ky.
kayak@cbnewsj.ATT.COM (thomas.j.czarnecki) (02/09/90)
For Sale:
3B1 - UNIX PC
MC68010 processor - 10 MHz
2.5 mg memory
MiniScribe 67 mg. Hard Disk - 28 msec access
1200 baud internal modem
360K floppy drive
graphics monochrome monitor (720 x 348 res)
keyboard with mouse
serial & parallel ports
*** Dos-73 co-processor card (math co-processor inst.)
*** 2 port serial card
UNIX System V Rel II (3.51m)
3.51 Development Set
3.51 Document Prep Set
HDB Uucp
About 30 meg of public domain software including
most software from the STORE.
UNIX-PC Word Processor
Microsoft Word
Dbase III
SuperComp 20 Spread Sheet
chips (72 256K/150 nsec), sockets, and instructions
to upgrade system to 4 meg total.
Manuals, 2 extra monitors with case tops,
extra keyboard with mouse (new), spare WD2010 hard disk
controller chip (new), extra power supply (new).
System is 1 year old with original packing,
performs flawlessly.
Current prices from Discovery Electronics or
Edison Communications for a comparable system
are over $3,000.00 excluding software and other
parts.
Terms: Shipping negotiable
Price: $1450.00 Base Unit
$1795.00 Above + Dos-73 Coprocessor
$1995.00 Above + Serial Card
10% before shipping, balance COD
Contact:
Tom Czarnecki
att!mtfmi!tjc
(201) 957-6543 (work)kayak@cbnewsj.ATT.COM (thomas.j.czarnecki) (02/28/90)
I have a Combo (Serial) card left over from the recent sale of my UNIX-PC (3B1). Anyone interested can call or send email for specifics and price. Tom Czarnecki att!mtfmi!tjc (201) 957-6543 (work)
hepler@cbmvax.commodore.com (Ed Hepler - LSI Design) (05/05/90)
For Sale:
ATT Unix-PC 3b1
- 2MB RAM
- 67 MB Hard Drive
- Mouse, monitor, keyboard, floppy, modem, etc. (all the usual stuff)
- Software:
- Foundation Set (UNIX, etc.)
- Development Set (cc, etc.)
- Public domain stuff...
The system recently had a new motherboard installed by ATT and still has
about a month left on their (ATT's) warrenty. It is in excellent
condition.
$1300.00 plus shipping (I have the original cartons...)
Ed Hepler
hepler@cbmvax or call (215) 296-3867 in the evening...