MAILER-DAEMON@BU-CS.BU.EDU.UUCP (03/29/87)
----- Transcript of session follows ----- 421 golden@bulsr4.bu.edu: Host bulsr4.bu.edu is down ----- Unsent message follows ----- Received: from ATHENA (athena.mit.edu) by bu-cs.bu.edu (3.2/4.7) id AA20295; Wed, 25 Mar 87 22:28:35 EST Received: by ATHENA (5.45/4.7) id AA21617; Wed, 25 Mar 87 22:03:26 EST Received: from NTT-20 by SUMEX-AIM.STANFORD.EDU with Cafard; Wed 25 Mar 87 19:02:13-PST Date: Thu 26 Mar 87 08:56:25 From: Yasuki Saito <yaski@NTT-20.MIT.EDU> Subject: ximpv on SUN To: xpert%athena.mit.edu@SUMEX-AIM Organization: NTT Basic Research Laboratories, NTT Corporation Address: 3-9-11 Midori-cho Musashino-shi Tokyo 180 Japan Phone: +81 (422) 59-2537 Message-Id: <12289310068.23.YASKI@NTT-20.NTT.JUNET> I am currently working on Japanese TeX and wants to preview the output of JTeX. The easiest way seems to me to use "ximpv" because we are using IMAGEN printer as output device. However, ximpv in V10R4 does not work properly on our SUNs (on both SUN2 and SUN3). As far as I can tell from the output of ximpv (it works but the output is wrong), there must be some byte swapping somewhere in the program. Do you know this bug? Or do I made some mistakes in the installation process? I will appreciate your help. -yaski -------