isaac@goanna.oz (Isaac Balbin) (08/07/89)
The serial session supports an emulated ANSI X3.64 I assume the telnet session is the same. Does anyone have a termcap entry for these? Finally, are there any Encore multimax users running X11R3 as a server to NCD 16" X-terminals out there. We are running UMAX V 2.2F, and have suspicions the X system therein is faulty --- many utilities just die. Thanks in advance ---------------------------------------------------------------------------- Isaac Balbin, Department of Computer Science, ACSNET: isaac@goanna.oz Royal Melbourne Institute of Technology, JANET: isaac%goanna.oz.au@uk.ac.ukc GPO BOX 2476 V, ARPA: isaac%goanna.oz.au@uunet.uu.net Melbourne, 3001, CSNET: isaac%goanna.oz.au@australia AUSTRALIA UUCP: ...!uunet!goanna.oz.au!isaac Phone: +61 3 660 2803 BITNET: isaac%goanna.oz.au@relay.cs.net Fax : +61 3 663 2764 EARN: isaac%goanna.oz.au@uk.ac.rl.earn
sehgal@CS.BUFFALO.EDU (Aditya Sehgal) (08/08/89)
>Finally, are there any Encore multimax users running X11R3 as a server >to NCD 16" X-terminals out there. We are running UMAX V 2.2F, and have >suspicions the X system therein is faulty --- many utilities >just die. Thanks in advance We are running X11R3 as a server to NCD 16 terminal. Also I have installed X clients on an Encore Multimax running UMAX 4.2 Everything works fine. sehgal ------------------------------------------------------------------------------ Internet: sehgal@cs.Buffalo.EDU uucp : ..!{ames,boulder,decvax,rutgers}!sunybcs!sehgal BITNET : sehgal@sunybcs.BITNET