mauro@OLIVEB.ATC.OLIVETTI.COM (Mauro Buffoni) (09/04/89)
Hi, I am the Network Administrator for Olivetti systems in Ivrea (Italy). We receive a lot of mail addressed to one (ilcu) of our users that has left our company. Could you stop to send these mails ? Follows you can see an example of mail that shows that. Thank you Mauro Buffoni (mauro@oliveb.olivetti.com) From MAILER-DAEMON@iconet Wed Aug 30 08:08:58 1989 Received: by icoven.ICO.OLIVETTI.COM (5.51/ICO-1.0) id AA09087; Wed, 30 Aug 89 08:08:53 +0100 Return-Path: <MAILER-DAEMON@iconet> Received: by iconet.ICO.OLIVETTI.COM (5.51/ICO-1.0) id AA22418; Wed, 30 Aug 89 02:59:21 EDT Date: Wed, 30 Aug 89 02:59:21 EDT From: MAILER-DAEMON@iconet (Mail Delivery Subsystem) Subject: Returned mail: User unknown Message-Id: <8908300659.AA22418@iconet.ICO.OLIVETTI.COM> To: Postmaster@iconet To: oliveb!pyramid!expo.lcs.mit.edu!xpert-request Status: R ----- Transcript of session follows ----- >>> RCPT To:<ilcu@icoven> <<< 550 <ilcu@icoven>... User unknown 550 icoven!ilcu... User unknown: Not a typewriter ----- Unsent message follows ----- Return-Path: <oliveb!pyramid!expo.lcs.mit.edu!xpert-request> Received: by iconet.ICO.OLIVETTI.COM (5.51/ICO-1.0) id AA22414; Wed, 30 Aug 89 02:59:21 EDT Received: by oliveb.OLIVETTI.COM (smail2.5) id AA02723; 29 Aug 89 23:10:25 PDT (Tue) Received: by pyramid.pyramid.com (5.61/OSx5.0-890710) id AA01541; Tue, 29 Aug 89 22:51:58 -0700 Received: by decwrl.dec.com; id AA03047; Tue, 29 Aug 89 22:18:28 -0700 Received: from BLOOM-BEACON.MIT.EDU by expo.lcs.mit.edu; Wed, 30 Aug 89 00:08:14 EDT Received: by BLOOM-BEACON.MIT.EDU with sendmail-5.59/4.7 id <AA27743@BLOOM-BEACON.MIT.EDU>; Tue, 29 Aug 89 23:44:19 EDT Received: from USENET by bloom-beacon.mit.edu with netnews for xpert@expo.lcs.mit.edu (xpert@expo.lcs.mit.edu) (contact usenet@bloom-beacon.mit.edu if you have questions) Date: 30 Aug 89 02:29:39 GMT From: decwrl!uunet.uu.net!virtech!cpcahil (Conor P. Cahill) Organization: Virtual Technologies Inc Subject: Re: xterm on a serial port?? Message-Id: <1089@virtech.UUCP> References: <13397@well.UUCP> Sender: xpert-request@expo.lcs.mit.edu To: xpert@expo.lcs.mit.edu In article <13397@well.UUCP>, gors@well.UUCP (Gordon Stewart) writes: > Hi, we have a device which expects a VT100 on the other end of a serial > connection. I would like to use an xterm window to talk directly to > the /dev/tty? serial line. Is this possible? Recommendations appreciated. Run a cu in the xterm window (or tell xterm to start the cu instead of the default shell). -- +-----------------------------------------------------------------------+ | Conor P. Cahill uunet!virtech!cpcahil 703-430-9247 ! | Virtual Technologies Inc., P. O. Box 876, Sterling, VA 22170 | +-----------------------------------------------------------------------+