beitel@excalibur.tn.cornell.EDU (Beitel) (06/03/90)
Hi,
I am in the process of building X11R4 on Aix 370 architecture and have been
unsuccessful. Everything seems to build just fine, but when I go to execute a
client, say xlogo for example, I get the following errors:
$ dbx xlogo
dbx version 4.0 for AIX.
Type 'help' for help.
reading symbolic information ...
(dbx) run
illegal instruction (Specification exception)
in .strspn at 0x737467
fetch: could not read instruction at 0x737464
(dbx) where
.strspn(0x9ff370, 0x2039e0) at 0x737467
GetAppUserDefaults(0x203a4c) at 0x10b4c6
GetInitialResourceDatabase(0x70121114, 0x1469dc) at 0x10b790
_XtDisplayInitialize(0x143c6c, 0x9ff958, 0x60143ca8, 0x143cd2, 0x0, 0x0,
0x9ffc98, 0x9ffd0c) at 0x10bd7c
XtDisplayInitialize(0x101e3c, 0x21a6c4, 0x2, 0x21a6dc, 0x0, 0x0,
0x9ffc98, 0x9ffd0c) at 0x1079ea
XtOpenDisplay(0x0, 0x0, 0x0, 0x9ffbf0, 0x0, 0x0, 0x9ffc98, 0x9ffd0c) at
0x1078da
XtAppInitialize(0x0, 0x1, 0x9ffd0c, 0x9ffca8, 0x9ffc98, 0x9ffd0c,
0x200010, 0x0, 0x0) at 0x10c0c6
main(0x1, 0x9ffd0c) at 0x100200
(dbx) quit
I have the feeling that I have not setup the config files exactly correct.
If anyone has successfully build X11R4 on this type of architecture, could
they please e-mail me, or maybe even send me the necessary config files like
Imake.tmpl, ibm.cf, site.def, Project.tmpl, and any others that you had
to change.
Thank you... David Beitel
dabx@cornellf.tn.cornell.edu
dabx@eagle.cnsf.cornell.edu