[comp.os.minix] Minix on DTK 1010 mother board

jdeitch@pnet01.cts.com (Jim Deitch) (04/22/89)

I would like to add this configuration to the list:
 
 DTK 1010 (10 mhz. 0 waitstate) motherboard
 Maxtor XT 1140 Hard disk
 MG-200 monographics card
 WD 1003 WA2 Controller

The only problem I had was with the 16550 uart on my serial card.  I fixed the
problem, and gained some speed from the rs232 driver.  I am sending the diff
to Andy before issuing them.  In case you don't know, the 16550 is a drop in
replacement for the 16450 and 8250 uarts, but with an on board FIFO that
allows you to determine when the uart interupts the system.

 Jim


UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!jdeitch
ARPA: crash!pnet01!jdeitch@nosc.mil
INET: jdeitch@pnet01.cts.com