nhc%mtdcc.uucp@vm1.nodak.edu (Neville H. Chandler) (06/09/89)
This message got sidetracked along the way due to an error in the address. Please note that the original sender is nhc@mtdcc.UUCP . mgh ----------------------------Original message---------------------------- Received: from NDSUVM1 by NDSUVM1.BITNET (Mailer R2.03B) with BSMTP id 4191; Thu, 08 Jun 89 08:37:24 CDT Received: from plains.NoDak.edu by VM1.NoDak.EDU (IBM VM SMTP R1.2.1MX) with TCP; Thu, 08 Jun 89 08:37:22 CDT Received: from uunet.UU.NET by plains.NoDak.edu; Thu, 8 Jun 89 08:37:05 -0500 Received: from att.UUCP by uunet.uu.net (5.61/1.14) with UUCP id AA02138; Thu, 8 Jun 89 09:36:52 -0400 Date: Thu, 8 Jun 89 09:36:52 -0400 From: nhc@mtdcc.UUCP Message-Id: <8906081336.AA02138@uunet.uu.net> Apparently-To: INFO-MINIX@UDEL.EDU.bitnet Hello All, I have Minix 1.3 running on an AT&T 6300 PLUS. This machine has an i80286 processor but is rather unlike a PC/AT. The ROM-BIOS does not support Int 15, Function 87h for block moves from/to extended memory. I wrote a driver that handles Int 15 - function 87h and want to add it my system. The primary reason for this is to use the 384K of extended memory on the mother board for the root directory. The problem I have is my unfamiliarity with the syntax of the source required by asld. Could anyone help with a manual/instructions for the assembler? Would someone send me a copy of dos2out (source, binary or both)? To 6300+ users, I have modified at_wini.c and have a 20MB hard disk partitioned with 10MB for MS-DOS and 10MB setup as hd2, hd3 and hd4 with /usr on hd2. Thanks in advance. Neville H. Chandler nhc@mtdcc.att.com