kyne@nadia.UUCP (Nicolai Matthiessen) (07/23/89)
I have still problems running the Minix-ST with rs232- and midi-add. I've fixed the new kernel using the OCRMOD (that works fine), not share procs with tty.c, not allow a normal TCSET to change to baud 0 .... But when I write to the rs232 port after some bytes (dependent on the size of the output) the output stops. In the variable tty_cum is the correct number of bytes - but not on my connected terminal! The same problem arises when I'm logged in via the rs232 port. When I'm logged in via the rs232 port after the first (incomplete) output the mode flags in sgttyb.sg_flags are changed (e.g. no ECHO) and cannot be set (e.g. with stty) to other (correct) values. In login.c I set the correct values, and no problem until I login and call the first program. In login.c I set the baud rate with args.sg_ispeed=B1200 (sgtty.) and I can login with the selected baud rate. But when I'm logged in the value of args.sg_ispeed is always undefined! Next problem: When I type on the console 'stty </dev/tty1' the rs232 port gets stuck! Are these known problems with a known bug fixes??? I do not have a new login.c. I have compiled the kernel with the original ioctl-lib and the ioctl-lib posted with cu.c - same problem. If there are fixes to ioctl.c or login.c needed - please post or mail them! Please, help me! After 2 weeks of 'fulltime-Minix' I don't know how to go on with that problem! Greetings Nic -- ------------------------------------------------------------------------- Nicolai Matthiessen - Malmsheimer Weg 38 - 7043 Grafenau 1 - West Germany kyne@nadia.UUCP - ...!uunet!unido!pfm!nadia!kyne - Voice +49 7033 41788