cwr@pnet01.cts.com (Will Rose) (03/06/90)
The new kermit binary posted by ast goes togther ok, with the posted crc
and length; these differ slightly from the kermit in the 1.3 distribution.
However, the speed-setting code still doesn't work; I've tried it on a tty
set up with 0f2 (nothing on the port) and 2d1 (getty on the port), and in
the first case kermit sticks to the 4800 baud kernel default, and in the
second the 2400 getty speed.
This was on a fairly standard XT clone; any more ideas? (BTW, kermit
*reports* a speed change - but nothing changes on the line).
Good 'ere, innit?
Will
-----------------------------------------------------------------------
"If heaven too had passions | Will Rose
even heaven would | UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cw
grow old." - Li Ho. | ARPA: crash!pnet01!cwr@nosc.mil
| INET: cwr@pnet01.cts.com
UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cwr
ARPA: crash!pnet01!cwr@nosc.mil
INET: cwr@pnet01.cts.com