ylee@loanshark.cs.indiana.edu (Raymond) (03/17/90)
I posted this problem sometime back and I still couldn`t fix it.
I have a problem with spurious interrupts when I try to boot
PC MINIX 1.5 in a Texas Instrument AT compatible. I had no
trouble with it in a Zenith 386 or a Zenith 286.
When I put the 1.5 boot disk in drive A and turn on the machine,
it gives the normal minix menu, when I type "=", I get the
message "spurious interrupt .... ignore or reboot"
The Texas Instrument is configured with a 1.2 drive A, a 10 Meg
Hard disk, a monochome monitor.
PC Minix 1.3 works fine with the TI machine, is there any modification
in 1.5 that is not backward compatible ?
Has anyone come across the same problem ?
-------------------------------------------------------------------------------
Yao-Chung Lee Bitnet : yalee@iugold.bitnet
808 E. Hunter Ave, Apt 7 Internet: ylee@silver.ucs.indiana.edu
Bloomington, IN 47401 UUCP: {ames,rutgers,att}!iuvax!silver!ylee
-------------------------------------------------------------------------------