pcm@iwarpr0.intel.com (Phil Miller) (06/12/90)
I am having difficulty constructing a boot image file. I have traced the problem down to the `build' program, which chokes & dies while trying to read the symbol table information from the `kernel' program. Since the `ast' program is what puts the symbol table into the `kernel' program, I monitored what it was doing. Turns out that when `ast' is run, it successfully modifies the file (a.out) header to reflect the addition of symbol table information, but it doesn't actually add the information. Anybody seen a problem like this, or have a suggestion as to what might be wrong? Following are some pieces of information about my system. version I'm running: v1.5.3 version I'm building: v1.5.10 `ast' was built with the v1.5.10 `libc.a' runs tests up to test18 fine (Probably others are ok; I'm too cautious to run more 'til I hear it's ok; I have a related article requesting info about the tests) Thanks in advance for the info, Phil C. Miller iWarp Development Program 5200 NE Elam Young Pkwy pcm@iwarp.intel.com Intel Corporation Hillsboro, OR 97124 Beaverton, Oregon M/S CO4-02 -- Phil C. Miller iWarp Development Program 5200 NE Elam Young Pkwy pcm@iwarp.intel.com Intel Corporation Hillsboro, OR 97124 Beaverton, Oregon M/S CO4-02